Injection molding machine

Engel DUO 5550/1100

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Dcjdpsw U Taxefx Ailsn Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC Dsdpfx Aiepkyn Rsljcn

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 Dcodew E Nnbepfx Ailen number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC Dcsdpfx Aisuhatpjlon - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Dcedpforq Hmzox Ailjn Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor Dedsvtz Dxopfx Ailocn - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf

Condition: like new (used), functionality: fully functional, SURDRY 6-Cage Oscillating Autoclave – Industrial Sterilization Dcjdpox Tilisfx Ailen SURDRY oscillating autoclave with a capacity for 6 cages, designed for the sterilization and thermal treatment of packaged food products in industrial batch processes. The equipment incorporates an oscillating load movement system during the thermal cycle, allowing the packages to be kept in controlled motion during specific phases of the process. This technology is particularly beneficial for products where agitation can promote heat transfer and reduce process times, depending on the product, format, and recipe. Its 6-cage configuration provides a high processing capacity for continuous production industrial facilities. MAIN FEATURES -Manufacturer: SURDRY -Type: Industrial oscillating autoclave -Capacity: 6 cages -Application: sterilization / pasteurization -Oscillating load movement system -Batch thermal treatment -Horizontal chamber -Industrial construction in stainless steel -Large-diameter front door -Safety locking system -Motorized drive of the oscillation system -Control of cycle parameters -Integrated piping and valve system -Designed for industrial production -Integrable into automatic sterilization lines PROCESS The SURDRY 6-cage oscillating autoclave is designed to perform controlled thermal treatments on previously packaged products. The loaded cages are placed into the chamber, and once closed, the programmed cycle is carried out through different phases of heating, thermal maintenance, and cooling. During the treatment, the system allows for the application of a controlled oscillating movement to the load. Depending on the product, this agitation can improve internal circulation and promote faster and more uniform heat transfer. It can be integrated with: -Automatic loading and unloading systems -Cage conveyors -Basket loaders and unloaders -Cage transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial pasteurization or sterilization processes. Depending on the configuration and process, it can work with cans, jars, trays, pouches, and other packaging suitable for thermal treatment in an autoclave. The combination of SURDRY technology, oscillation system, and 6-cage capacity provides a particularly interesting solution for high-capacity industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Dodpfx Aieif Elgolscn

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C Dcjdpfx Aocmr D Hsilsn external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. Dsdpexrwpksfx Ailecn with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 *