Used Hydraulic Powder Press for sale (24,916)

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Dcjdpfopygydex Akcjg Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1993 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS Dcodpeh N Dqrofx Akceg CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING WEIGHT 11200 KG SERIAL NO. 6150/11324 MOTOR SIZE 7.5 KW YEAR OF MAUFACTURER 2004

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Dcjdpou Au U Tsfx Akcjg Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: used, Year of construction: 2003, pressing force: 120 t, operating speed: 8 mm/s, overall weight: 12,000 kg, Hydraulic Press Brake Brand: Hidrogarne / Ermaksan Djdpjx Tp Auofx Akcecg Model: AP 4100-120 Year: 2003 Power: 11KW Weight: 12,000kg Bending length: 4100mm Force: 120t Approach speed: 80mm/s Working speed: 8mm/s Y-axis and X-axis back gauge control with ELGO control system. PROMECAM punch holder. Supplied with: - 4m one-piece die, 90x90mm with several V openings - 4m gooseneck punch, 90mm height, in 835mm sections and some additional smaller pieces - Also comes with sets of straight and 30-degree punches (see pallet photos of punches)

Condition: new, pressing force: 135 t, operating speed: 10 mm/s, reverse speed: 130 mm/s, table height: 940 mm, overall weight: 7,750 kg, MVD SERIES B - 3,100x135Tn SERIES B - 4 Axes Large press brake for achieving outstanding bends and flawless workpieces The body and upper beam are of steel construction, designed according to minimum and optimum strength criteria. Model: B135/3100 Bending force: 135 tons Bending length: 3100 mm Distance between uprights: 2600 mm Ram stroke: 260 mm Daylight: 465 mm Throat depth: 410 mm Table height: 940 mm Length x Width x Height: 4690 x 2340 x 2980 mm Approach speed: 210 mm/s Dcsdpfxoxfzpzj Akcog Return speed: 130 mm/s Bending speed: 10 mm/s Oil tank capacity: 180L Main motor: 11 kW Weight: 7,750 kg Standard features: CNC 3 axes Y1, Y2, X 260 mm stroke, 410 mm throat depth ESA S630 CNC control unit ± 0.03 mm precision SERVO-driven, motorized rear gauge X = 750 mm Promecam quick-release punch holder Sliding front sheet support arms Special narrow bottom table by MVD (European type) GIVI optical linear scales Standard punch tooling (H: 67, 850 R:08) Standard die tooling (60x60 mm, 4 Vee V=16-22-35-50 mm, 85°, H:60) LED lighting in RAM Optional features: Choice of X-axis backgauge options with 2-4-6-8 stops Wide bottom table for Multi Vee forming dies Anti-deflection crowning with original Wila wedges AKAS or DSP front laser safety systems Additional backgauge fingers Front laser safety

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Dcedpfxeyupulo Akcog Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, table width: 900 mm, total length: 3,000 mm, 100 ton press with pressing area 900 x 3000 mm, equipped with REXROTH HYAG31/2000 hydraulic press unit. Year of manufacture: 2001. The press was completely overhauled in 2025 and fitted with BUSSE heating plates up to 120 degrees Celsius and a SIEMENS-RITTAL touchscreen control panel. After basic disassembly, the press has a weight of approx. 40 tons. Includes roller conveyor and lift table. Dedpfx Ajyxp Unjkcscg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 1,600 t, table width: 2,800 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB The machine offered here is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany, carried out by a specialized company. During this overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from leading European manufacturers were used in the refurbishment. A particular highlight of this tryout press is that both the ram and the working table are equipped with drawing cushions. The working table is designed as a movable table. The ram can be stopped at any desired position and mechanically locked as required. Technical Data Manufacturer: MW/SCMB Model: PHD1600 T Press force (ram): 16,000 kN Stroke (max.): 1,200 mm Distance between ram and table: 2,350 mm Ram plate (dimensions): 5,000 × 2,800 mm Ram ejector force: 2,000 kN Ejector stroke (max.): 150 mm Ejector plate (dimensions): 3,700 × 1,300 mm Main motor power: 3 × 110 kW at 1,500 rpm Auxiliary motor power: n/a (1,500 rpm) Sliding table (dimensions): 5,000 × 2,800 mm Rapid approach speed: 300 mm/s Working speed (50% nominal force): 34 mm/s Working speed (100% nominal force): 17 mm/s Return speed: 300 mm/s Return force (gross): 1,660 kN Dcodsyxhq Ispfx Akcsg Lower cushion force: 4 × 1,000 kN Lower cushion stroke (max.): 280 mm Lower cushion dimensions: 3,920 × 1,680 mm The above specifications are taken from the machine documentation. The seller assumes no liability for their completeness or accuracy. The actual technical data and functions of the machine are decisive. Tool making (Tryout / Spotting)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Dcsdpsyxhp Djfx Akceg Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Condition: good (used), Hydraulic Punching Machine Type EHS, HE - Punching force approx. 12t (EHS-120) to approx. 20t (HE-20) - Power approx. 2.2kW / 3kW - Stroke approx. 100 mm Dodod A Tp Tjpfx Akcjcg - Two-hand safety control, alternatively foot switch Further hydraulic and pneumatic punching machines available in stock. Do you need the right punching tool? – Let us know. We will be happy to provide you with a suitable offer.

Year of construction: 1994, condition: ready for operation (used), A hydraulic transfer molding press Lauffer is available. Press force: 125t, power: 15kW, hydraulic oil volume: 300l, machine dimensions X/Y/Z: approx. 2200mm/1400mm/3000mm, weight: approx. 6500kg. An on-site inspection is possible. Dsdpfxjyxgq Ts Akcjcg

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Dsdpfxeyxgr Rj Akcecg

Condition: good (used), Year of construction: 2001, functionality: fully functional, working width: 3,000 mm, control type: CNC control, Hydraulic 6-Axis CNC Press Brake Manufacturer: TRUMPF Model: Truma Bend V 230 Year of manufacture: 2001 Control: CNC Graphic Press force: 230 tons Bending length: 3060 mm Installation height, max. distance between lower edge of punch and upper edge of die holder: 535 mm Ram tilting: +/- 10 mm Clear gap between uprights: 2690 mm Throat depth: 410 mm Table width: 200 mm Working height with 100 mm usable tool height: 1050 mm Speeds: 200 mm/sec Y-Axis: Rapid traverse / Working stroke / Return X-Axis: 500 mm/sec R-Axis: 300 mm/sec Accuracy1 * Axis positioning deviation: Y-Axis: 0.01 mm X-Axis: 0.04 mm R-Axis: 0.08 mm Stroke Range / Backgauge travel: Y-Axis stroke: 365 mm Dcjdpjyw Ubwsfx Akcsg X-Axis travel: 600 mm Max. backgauge range in X: 860 mm R-Axis travel: 250 mm Control: DA 65 Standard features Additional equipment Connected load: 38.5 kVA Electrical connection approx. Pneumatic connection: 6-7 bar Dimensions and weight: 3660 x 2310 mm (L x W) Required footprint (Length x Width) Height: 3059 mm Weight (approx.): 18,210 kg Equipment: Crowning via control Bending aids via control Backgauge via control

Condition: as good as new (ex-display), functionality: fully functional, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Hydraulic press brake with 4-axis backgauge. Demonstration machine, available immediately. German hydraulic pump with servomotor, highly efficient. Promecam tool holder, tooling included. Dsdpfxsywz Dxo Akcecg

Condition: not inspected (used), Year of construction: 2002, machine/vehicle number: 125600, functionality: unexamined, pressing force: 100 t, stroke length: 500 mm, table width: 600 mm, table length: 900 mm, overall weight: 1,600 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Press force: 100 t Dsdpfx Akjyr H Nzocscg Stroke: 500 mm Table dimensions: 900 x 600 mm MACHINE DETAILS Connection: 2.5 kW Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,100 x 2,300 mm Weight: 1,600 kg External reference: 41

Condition: new, pressing force: 20 t, machine/vehicle number: DF0233, pressure:20 t stroke:600 mm table surface area:2000 x 600 mm dimensions:ca. 3500 x 1200 x 2800 mm Dcodpfsfxyi Sex Akcog total power requirement:3 kW pre-running speed:9,9 mm/sec return speed:25 mm/sec Pressure power:180 bar :100 l weight of the machine ca.:3 t :5 Zoll

Condition: used, Year of construction: 2019, pressing force: 100 t, pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm Dsdpoffamxjfx Akcecg hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec :33 mm/sec

Condition: new, Year of construction: 2026, neu 2026 070168 prompt, Zwischenverkauf v Türkei 10900 € Dcsdpfswirt Iox Akceg 209.28 € 1 150 to horizontal verschiebbar 300 mm 1070 mm 280x200 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2480 mm 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Year of construction: 2007, condition: ready for operation (used), overall weight: 11,000 kg, total height: 2,850 mm, product length (max.): 4,550 mm, number of axes: 4, General Data Machine weight 11000 kg Measurements height 2850 mm Dimensions Machine Length 4550 mm Main Drive Number of axis 4 Bending length 3100 mm This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine. Application Types Dedpfxsx D Diuj Akcscg Bending

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Dsdpfx Asx D E N Ajkcecg Measurements height 2330 mm Control Unit Brand DELEM Model T3000 Main Drive Number of axis 6 Bending length 4140 mm Pressing force 1800 Kn Dimensions Machine Length 4610 mm Movement X-Axis Movement 600 mm Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Dodpfxsx D H I Hs Akcecg Control Unit Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Application Types Bending Dcsdpfx Asx D Rliokcjg

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Dcedpfom Nntyox Akceg Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: Dcedpfx Ajr Etulokcog - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) Dodpfx Aor D U I Dekcocg - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included