Used Hydraulic Baling Press for sale (24,175)

Year of construction: 1994, condition: ready for operation (used), A hydraulic transfer molding press Lauffer is available. Press force: 125t, power: 15kW, hydraulic oil volume: 300l, machine dimensions X/Y/Z: approx. 2200mm/1400mm/3000mm, weight: approx. 6500kg. An on-site inspection is possible. Lrsdpfjyxgq Tex Afaok

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Lredjyxgr Repfx Afajk

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Lrjdpfxjra A E Uo Afaok Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods Lsdpfjyupuljx Afaork - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: good (used), Year of construction: 2001, functionality: fully functional, working width: 3,000 mm, control type: CNC control, Hydraulic 6-Axis CNC Press Brake Manufacturer: TRUMPF Model: Truma Bend V 230 Year of manufacture: 2001 Control: CNC Graphic Press force: 230 tons Bending length: 3060 mm Installation height, max. distance between lower edge of punch and upper edge of die holder: 535 mm Ram tilting: +/- 10 mm Clear gap between uprights: 2690 mm Throat depth: 410 mm Table width: 200 mm Working height with 100 mm usable tool height: 1050 mm Speeds: 200 mm/sec Y-Axis: Rapid traverse / Working stroke / Return X-Axis: 500 mm/sec R-Axis: 300 mm/sec Accuracy1 * Axis positioning deviation: Y-Axis: 0.01 mm X-Axis: 0.04 mm R-Axis: 0.08 mm Stroke Range / Backgauge travel: Y-Axis stroke: 365 mm X-Axis travel: 600 mm Max. backgauge range in X: 860 mm R-Axis travel: 250 mm Control: DA 65 Standard features Additional equipment Connected load: 38.5 kVA Electrical connection approx. Pneumatic connection: 6-7 bar Dimensions and weight: 3660 x 2310 mm (L x W) Required footprint (Length x Width) Ljdjyw Ubwopfx Afaork Height: 3059 mm Weight (approx.): 18,210 kg Equipment: Crowning via control Bending aids via control Backgauge via control

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Baler Presto HPK 50 BS, year of manufacture 2011, with Whirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Model: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Lrjdpfxsyub Drs Afask Feed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Maximum feed volume: 1.23 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 6 t/h 60 kg/m³: 9.6 t/h 100 kg/m³: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Chain Belt Conveyor Data Manufacturer: Horstmann Model: PK 1100/11 Year of manufacture: 2011 Belt width: 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length: approx. 3000 mm Incline section: approx. 5000 mm Gooseneck: approx. 1000 mm The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026. Please note: All technical data is based on information from the manufacturer. We do not assume any liability for the specifications provided or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, Equipment: documentation/manual, DIXI 60 SLD horizontal press baler 2012 year of production Press checked by service / new hydraulic cylinder installed. Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Lsdpfx Afsyw Hz Neajrk Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, total length: 8,000 mm, total width: 8,000 mm, total height: 9,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. Lrjdpfxjyw Ah Ej Afask The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: as good as new (ex-display), functionality: fully functional, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Hydraulic press brake with 4-axis backgauge. Demonstration machine, available immediately. German hydraulic pump with servomotor, highly efficient. Promecam tool holder, tooling included. Ljdpfx Aoywz Dxefajrk

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Dixi 80 SLD with lifting/tipping device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Throughput capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for potential errors. This offer is subject to prior sale and change without notice. Lredpfx Aoyt Hl Ssfajk Inspection is possible by arrangement. Sale is ex works, advance payment, without warranty or guarantee.

Condition: new, pressing force: 20 t, machine/vehicle number: DF0233, pressure:20 t stroke:600 mm table surface area:2000 x 600 mm dimensions:ca. 3500 x 1200 x 2800 mm total power requirement:3 kW pre-running speed:9,9 mm/sec return speed:25 mm/sec Pressure power:180 bar :100 l weight of the machine ca.:3 t Lrjdefxyi Sjpfx Afaek :5 Zoll

Condition: used, Year of construction: 2019, pressing force: 100 t, pressure:100 t stroke:1000 mm table surface area:1045 x 1045 mm table extendable:800 mm table speed:50 mm/sec dimensions:ca. 2550 x 2850 x 3620 mm height over floor:600 mm diameter of piston:76 mm ram diameter:110 mm ram hole:40 H7 Cylinder:300 mm total power requirement:5,5 kW pump capacity:24,9 Lt./min Pressure power:250 bar :200 l daylight opening:1600 mm daylight:1200 mm weight of the machine ca.:6,6 t hollow:180 mm hollow:400 mm :1000 kg :1 - 10 mm/sec work stroke:3 mm/sec :1 - 25 mm/sec Lredsffamxjpfx Afask :33 mm/sec

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 200 mm, retraction force: 10 t, overall weight: 5,700 kg, operating pressure: 250 bar, installation height: 450 mm, pressure: 250 bar, We are offering this used Lauffer RPT100 hydraulic press, year of manufacture 1992. Machine type: RPT100 Machine no.: 14161 Year of manufacture: 1992 Weight: 5,700 kg Maximum pressing force upper ram: 1,000 kN Maximum pressing force lower ram: 100 kN Retraction force upper ram: 100 kN Retraction force lower ram: kN Maximum stroke upper ram: 200 mm Maximum stroke lower ram: 80 mm Maximum operating pressure: 250 bar Installation height: 450 mm Lrjdpfx Ajywiyuefaok Overrun distance: 20 mm Overrun time: 84 ms Safety distance: 134 mm For sale is a hydraulic press / high-speed press from quality manufacturer Maschinenfabrik LAUFFER GmbH & Co. KG. Technical Specifications: Manufacturer: LAUFFER Designation: oil-hydraulic high-speed press / hydraulic press Type: RPT 100 Year of manufacture: 1992 Factory no.: 14161 Pressing force: 1,000 kN (≈ 100 t) Operating pressure: 270 bar Stroke (ram): 307 mm Clamping area / table: 710 × 450 mm Clearance: 710 × 560 mm Distance from table to ram: 450 mm Column distance (as per data sheet): 830 mm (width) / 280 mm (long side) Power requirement: 15 kW Flow rate: 30 l/min Speed: 1500 rpm Oil capacity: approx. 450 l Oil specification: HLP 46 (DIN 51525) Condition / Inspection: Used machine from industrial stock. Inspection and collection by arrangement. Collection/Logistics: Collection exclusively by the buyer. Removal by crane via roof skylight required (ground-level removal is not possible). Organization and costs of crane/freight forwarding are approximately €4,500 plus VAT.

Year of construction: 2008, condition: good (used), Horizontal baling press Ledpog Ibt Njfx Afaork Build in 2008 Bale size 800x1000x1400 Loading height 1250mm

Condition: good (used), Year of construction: 2020, functionality: fully functional, Just arrived Lrjdpfx Afsygk Hgjask Baling Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Please note: All technical data is based on the manufacturer's information. We do not accept any liability for the information provided or for possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale ex works, advance payment only, without warranty or guarantee.

Condition: not inspected (used), Year of construction: 2002, machine/vehicle number: 125600, functionality: unexamined, pressing force: 100 t, stroke length: 500 mm, table width: 600 mm, table length: 900 mm, overall weight: 1,600 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Press force: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm MACHINE DETAILS Connection: 2.5 kW Dimensions & Weight Lrodpfx Afjyr H Nzjaek Dimensions (L x W x H): 2,100 x 1,100 x 2,300 mm Weight: 1,600 kg External reference: 41

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm Ledpfjtutwvsx Afaork -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Lrodpfjxmr Rxex Afaok Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: new, Year of construction: 2026, neu 2026 070168 prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 150 to horizontal verschiebbar 300 mm 1070 mm 280x200 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2480 mm 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH Lrsdpewirt Ijfx Afajk

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces Ljdpfx Afoxz Hfmoaerk

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm dayligth min. 120 / max. 500 mm Lrjdjw D Hiaopfx Afask Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: excellent (used), Year of construction: 1991, Hydraulic press Walther WUP Table: 1000 x 450 mm Stroke: 350 mm Max. adjustable table height: 800 mm Ledpfx Asyvy Nkjfasrk Pressure: 60 t

Year of construction: 2007, condition: ready for operation (used), overall weight: 11,000 kg, total height: 2,850 mm, product length (max.): 4,550 mm, number of axes: 4, General Data Machine weight 11000 kg Measurements height 2850 mm Dimensions Machine Length 4550 mm Main Drive Number of axis 4 Bending length 3100 mm This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine. Application Types Bending Lodsx D Diuopfx Afaerk

Year of construction: 2013, operating hours: 14,572 h, condition: ready for operation (used), General Data Machine weight 13200 kg Measurements height 2330 mm Lsdpfsx D E N Asx Afajrk Control Unit Brand DELEM Model T3000 Main Drive Number of axis 6 Bending length 4140 mm Pressing force 1800 Kn Dimensions Machine Length 4610 mm Movement X-Axis Movement 600 mm Y-Axis Movement 20 mm This 6-axis TRUMPF TRUBEND 3180 hydraulic press was manufactured in 2013. It features a bending capacity of 1800 kN and a bending length of 4140 mm. The machine includes a CNC control Delem T3000, a quick clamp system, and a 4-axis CNC backgauge with X, R, Z1, Z2. It operates on 400 V with a power consumption of 18.5 kW. Consider the opportunity to buy this TRUMPF TRUBEND 3180 hydraulic press. Contact us for more information about this machine. Application Types Bending

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 Lrjdpfx Afox D H I Hsaek This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending