Used Hot Water Shrink Tunnel for sale (10,631)

Year of construction: 2001, condition: used, functionality: unexamined, Hot stamping foil laminating machine for strips MAKOR, model DORA 7, year of manufacture 2001, price €19,100 OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels, Italian manufacturer MAKOR, price €1,500 - Year of manufacture: 2003 - Serial number: 5933 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm Ijdpfx Ahjytc E Usbjih - Weight: 280 kg 2. MAKOR ST/100 foil slitting machine, price €1,200 3. MAKOR TEP 3000 conveyor belt, price €700

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,397 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: ± 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tyre size front/rear: 18.00 - 25 Axle load front/rear loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Engine: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permitted cross slope: 15% Max. permitted gradient: 28% Turning radius outer/inner: 6,713 / 3,547 mm Bucket capacity (SAE, heaped): 5.4 m³ Maximum speed loaded forward / reverse on level ground: 25.0 km/h Isdpoytpxhefx Ahboih Exhaust system: Silencer / Catalytic converter Main dimensions: 9,715 x 2,600 x 2,450 mm (LxWxH) Axle load front/rear unloaded: 13,100 / 16,900 kg Operating weight: 30,000 kg Payload: 11,000 kg

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Fully automatic flow pack machine for packaging products – regardless of their length – in a full wrap and without film overlap. Product infeed is via a conveyor belt while simultaneously wrapping into a center-folded film using a forming shoulder. Product separation is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is achieved by a continuous side sealing device. The height position of the forming shoulder and sealing units is manually adjustable. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Iedpfjyybuijx Ahbjih Technical data: Cross sealing bar: 850 mm Film: center-folded film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Pass-through height: 300 mm Working height: 780 - 930 mm Power supply: 400 Volt three-phase, 50 Hz with protective conductor Rated output: 3.5 kVA Rated current: 5.1 A Inspection and demonstrations are possible in our facilities by appointment. Functionality guarantee, no warranty.

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. Iisdpfx Aeyyb Snehboh The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data - Capacity: approx. 18,000 bottles/hour - Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L - Application: Roll-fed labelling of PET bottles - Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing - Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  - Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates - Cooling unit | Kelvin Cool-Power | External cooling unit - Control system | Control panel with process indicators

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water Iedpfoywuzwsx Ahbsih - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, Used machine Iijdpfsy S U Hcsx Ahbsh Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: L-sealer KW 5050 Year of manufacture: 1999 Dimensions: approx. 1850x1000x1550 (LxWxH) Weight: approx. net 210 kg / gross 250 kg Technical data: Sealing frame dimensions: 500 x 500 mm Film roll width: max. 650 mm Working height: 840 - 950 mm Power connection: 230 V three-phase current Rated power: 1.5 kVA Rated current at 230 V: 6.5 A Extremely robust, easy to operate, manual L-sealing machine. Sealing frame dimensions 500 x 500 mm. Equipped with reliable impulse welding technology, Teflon-coated separating welding wire for absolutely odorless operation as well as proven closing mechanism with high contact pressure.

Condition: good (used), Year of construction: 1992, functionality: fully functional, product height (max.): 200 mm, product width (max.): 600 mm, nominal power: 12.75 kW (17.34 HP), Shrink-wrapping machine with infeed conveyor table, in good and functional condition. Maximum product width: 600 mm. Iisdpozb Duyjfx Ahbjh

Condition: new, power: 349 kW (474.51 HP), first registration: 10/2024, fuel type: diesel, tire size: 13R22.5, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,500 mm, loading space volume: 20 m³, Year of construction: 2024, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Windshield - Power Take-Off (PTO) = Further Information = Technical Information Iijdpfx Aezq D T Hohboh Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Transmission: ZF16S2520TO, 16 gears, manual transmission Axle Configuration Tire size: 13R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 12,700 kg Payload: 20,800 kg GVW: 33,500 kg Functional Body manufacturer: Ravasini Drinking water tank Number of compartments: 1 Pump: Yes

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TEG802P3-20 - 2200415661, cooling capacity: 152 kW (206.66 HP), type of cooling: water, overall weight: 2,192 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, pressure: 6 bar, temperature: 7 °C, volume flow: 25.9 m³/h, pump pressure: 3.15 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 12 months, protection type (IP code): IP54, Equipment: cooling unit, type plate available, Sales exclusively to customers with a German billing and delivery address! Process chiller/cooling unit/chilled water set, air-cooled, Type: TAE G 802 P3-20 (R454B) Iisdpfx Aezrw Hpjhboh MTA S.p.A. TAE G 802 P3-20 are air-cooled, compact water chillers suitable for outdoor installation (from -20°C to +46°C). Includes crankcase heater, phase monitoring, buffer tank 950 liters, integrated P3 circulation pump, and winter package -20°C. Chilled water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 152 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h) 25.9 Available pump pressure (bar) 3.15 Ambient temperature (°C) 32 Refrigerant R 454B Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW) 79 Max. current (A) 142 Starting current circuit (A) 286 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200415661 Year of manufacture: 2024 Condition: Visually 1, Technically ok (Warehouse stock, as new) Price: upon request Used machines may have visual defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), Year of construction: 2017, operating hours: 627 h, functionality: fully functional, total length: 6,900 mm, total height: 1,800 mm, total width: 1,600 mm, type of input current: three-phase, input voltage: 400 V, input current: 62 A, passage height: 300 mm, overall weight: 1,200 kg, passage width: 800 mm, input frequency: 50 Hz, nominal power (apparent): 43 kVA, throughput speed: 20 mm/s, temperature: 250 °C, Equipment: documentation/manual, BVM SC 8530 D3 Shrink Tunnel – Year of Manufacture 2017 – approx. 627 operating hours For sale is a BVM shrink tunnel SC 8530 D3, year of manufacture 2017, in technically flawless and visually very good, well-maintained condition. The system has only approximately 627 operating hours and is suitable for shrinking packaging films using hot air circulation. The adjustable tunnel transport and the adjustable side and bottom air flow allow the shrinking result to be adapted to different products and films. Technical data Manufacturer: BVM Brunner GmbH & Co. KG Type: SC 8530 D3 Year of manufacture: 2017 Machine no.: 20170962241 Commission no.: 6224 Operating hours: approx. 627 h Mains voltage: 3N 400 V Mains frequency: 50 Hz Current consumption: 62 A Power: 43 kVA Fuse rating: 63 A Max. passage width: 800 mm Max. passage height: 300 mm Transport speed: approx. 1.2 m/min at 50 Hz Working temperature: 110–250 °C Suitable for film types up to 100 µm External dimensions L × W × H: approx. 6,900 × 1,600 × 1,800 mm Total weight in operating condition: approx. 1,200 kg Sound emission: ≤ 75 dB(A) Equipment / Functions Hot air circulation Adjustable tunnel transport Temperature control Adjustable side air flaps Adjustable bottom air flow Heating fan Cooling fan Electronic preset counter Emergency stop device Cooling automatic Clean and clearly structured control cabinet Ijdezwk T Tspfx Ahbsih Original operating manual available Condition The system is in perfect technical condition and is also visually in very good and well-maintained condition. With only approximately 627 operating hours, the machine has very low operating hours. Price €17,000 (negotiable) Inspection possible by arrangement. Further information and pictures available upon request. Subject to prior sale and errors.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M50E/9044, Offer Number: M50E/9044 Machinetype: hot rolling machine Iisdpfx Asw E N Saehboh Make: SKF Type: EMB 200A Constr. year: 1980/2021 diameter range: 200 mm max. outside dia. of round pieces: 200 mm kind of heating: 200 KVA Location: Europe

Condition: used, Year of construction: 2006, Overview This machine was built in 2006 by Italian manufacturer Gamapck. The machine is in good production condition, already dismantled and stored in a warehouse. Techn. Details - Capacity: - Up to 45 packs / minute on single lane - Last production was 16,000 bph (six packs) - Bottles formats: PET bottles with shrinkable PE film - 12 x 0,33L Iiodjw En Ugepfx Ahbjh - 6 x 0,50L - 6 x 0,33L - 24 x 0,50L - Machine drive: Siemens S7 - Machine equipped with - Infeed conveyor & CE control panel - Supplied with spare parts

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Iodjx Altfopfx Ahbjih

Condition: used, functionality: fully functional, FRIGOSCANDIA FF-2-RMA Linear IQF Freezing Tunnel FRIGOSCANDIA FF-2-RMA linear IQF freezing tunnel, designed for the rapid and continuous freezing of food products in industrial production lines. Manufactured by FRIGOSCANDIA, a leader in industrial freezing technology, this equipment uses a rapid freezing system with controlled cold air circulation, allowing for a rapid reduction in product temperature as it moves through the tunnel. IQF (Individual Quick Freezing) technology is especially suitable for products that require rapid freezing, promoting the preservation of their characteristics and, depending on the product and process, allowing the units to remain separate during freezing. MAIN FEATURES -Manufacturer: FRIGOSCANDIA -Model: FF-2-RMA -Type: Linear IQF freezing tunnel -Continuous rapid freezing system -IQF technology – Individual Quick Freezing Iedpfown Hd Sjx Ahbeih -Forced cold air circulation -Continuous product transport -Industrial design for continuous operation -Insulated freezing chamber -Integrated control system -Robust construction for industrial use -Designed for high-production lines -Integrable into food processing facilities -Suitable for different food products depending on the configuration FREEZING PROCESS The FRIGOSCANDIA FF-2-RMA is designed to freeze product continuously as it moves through the inside of the tunnel. The product enters the freezing zone and is subjected to intensive circulation of low-temperature air, achieving rapid heat transfer until the required freezing conditions are reached. The linear system facilitates its integration between the preparation stages and subsequent storage or packaging operations of the frozen product. It can be integrated with: Product feeding systems Conveyors and elevators Preparation and processing lines Scalding and cooling equipment Inspection systems Weighing and dosing equipment Packaging machines Complete frozen product lines APPLICATIONS Especially suitable for industries of frozen vegetables, fruits, fish and seafood, meat products, ready meals and other frozen foods that require a fast and continuous industrial process. The FRIGOSCANDIA FF-2-RMA is a particularly interesting solution for plants looking to incorporate or expand their industrial IQF freezing capacity. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Iiedpfxexpww As Ahbjh Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle stock, we offer you: TLF 4000/TLF 5000 All-Wheel Drive on all-terrain MAN TGS 18.510 4x4 Chassis Introducing our MAN Mountain Lion! With 510 hp and the all-terrain, single-tired all-wheel chassis, it thrives in demanding environments. Perfect for steep gradients, adverse conditions, and off-road areas far from any road. Chassis: - MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) - Automatic transmission - Single-tire off-road specification for maximum off-road capability Cab: - Standard crew cab (1:5) in RAL 3000 (fire red) - Air conditioning and auxiliary heater - 4 standard SCBA holders in the crew compartment Superstructure: - High-quality modular construction in rust- and corrosion-resistant materials - 4 flexible and spacious equipment compartments per vehicle side - Swing panels for maximum storage capacity - Foldable steps for each lateral equipment compartment - Custom-made stainless steel equipment mountings according to your specifications - Walkable, non-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank: Iodpfx Ajxl Ab Sohbeih - Maintenance-free combined normal/high-pressure pump FPN 3000-10 - PUMP&ROLL capable - Output of over 3,000 l/min at 10 bar and 400 l/min at 40 bar - Integrated, infinitely adjustable foam proportioning system - Water tank 5,000 l with integrated 500 l foam agent tank - Auxiliary heater in the pump compartment Firefighting Equipment: - High-pressure rapid attack with 50 m form-stable hose - Remote-controlled foam/water monitor on the vehicle roof - Remote-controlled front monitor - Self-protection system with 4 spray nozzles in front of the wheels Safety & Lighting: - LED light bar on the roof / 2 LED front flashers - Additional blue lights on the superstructure - Pneumatic Martin horn special signal system - 100 W PA system with announcement unit - Rear view camera - Comprehensive LED lighting in crew and all equipment compartments - Perimeter LED lighting on the body and auxiliary headlights - Pneumatic LED light mast with remote control - Hygiene board on request We would be happy to provide you with a detailed offer and present the vehicle to you in Berlin. All details provided to the best of our knowledge without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M50E/9046, Offer Number: M50E/9046 Machinetype: hot rolling machine Make: SKF Type: EMB 110 Constr. year: 2001/2021 Iisdpfxjw Nxiue Ahbjh diameter range: 110 mm max. outside dia. of round pieces: 110 mm kind of heating: 335 KW Location: Europe

Condition: new, Year of construction: 2025, L-Sealer for shrink wrap packaging, for very large sized product, semi-automatic (manual infeed of product, automatic outfeed) with pneumatic closing mechanism of L-bar sealer. Suitable to be combined with SHRINKtunnel POF-XXL. - Technical specifications: 220V, 2.0kW; compressed air: 5.5bar, 0.1m³; max. speed of the machine in neutral: 20 cycles/minute; max. product dimensions (mm): L900xW600xH300 (can be varied on demand); max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions depending on actual packaging size required; weight (net/gross): 210/250kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Iisdpfov Nlztjx Ahboh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, L-Sealer for shrink wrap packaging, for extremely large sized product, semi-automatic (manual infeed of product, automatic outfeed) with manually operated closing mechanism of L-bar sealer (no compressed air required). Suitable to be combined with AMTEC SHRINKtunnel-POF-XXTRA (for very large/wide products). - Technical specifications: 380V, 5.0kW; max. speed of the machine in neutral: 15 cycles/minute; max. product dimensions (mm): L1750xW960xH280 (sealing blade length: L1850xW1050mm); max. weight of the product: depending on the dimensions of the product or rather how the weight is distributed on the feed table; machine dimensions: L3640xW1715xH1510mm; weight (net/gross): 450/550kg. In case of heavy products we will gladly producing a sample packaging of your product, either to confirm that the machine is able to handle your product or to offer you other machines for your packaging task. In semi-automatic machines, the number of cycles is to be understood as an operator-dependent value and additionally based on experience. Iiedpfov Nl Adjx Ahbeh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, XL-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XL (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute; packing sizes: (L + H) = 800mm provided that H < 180mm and (W + H) = 650mm provided that H < 180mm; length of sealing blades: horizontal = 903mm, vertical = 750mm; power: 220V/3.5kW; machine dimensions: L2430xW1550xH1300mm; weight: 930kg. Iiedpfov Nl A Dex Ahbeh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XL (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 40 cycles/minute; packing sizes: L(200-830)xW(200-630)xH(10-180), W+H Isdpfsv Nl D Iox Ahbjih

Condition: new, Year of construction: 2025, PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XXL (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 40 cycles/minute; packing sizes: L(200-830)xW(200-630)xH(10-300), W+H Iisdpfx Aev Nl D Uohbsh

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Ijdpfsv D Ezijx Ahbeih Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Condition: used, Year of construction: 2019, Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data Iijdpfx Ahjwgyx Tebsh - Capacity: Up to 40 ppm (packs per minute) - Formats: 75cl – 3x2 - Dimensions: L. 623 cm × W. 250 cm × H. 210 cm - Working table height: Adjustable from 0.9 m to 0.95 m - Electrical power: 30 kW

Condition: excellent (used), Year of construction: 2004, Type Loedige TSHK-160/KGU-400 Iijdpfjvzzw Usx Ahboh Serial no. 3901 Year of manufacturing 2004 Hot mixer 210 liters Cooling mixer 391 liters