Used Wille 725 for sale (790)

Condition: used, operating hours: 9,321 h, Serial number: 14 8xxxx Please contact ATS Norway for more information Prsdpfx Agevyffgowsc Please provide reference number upon request: 19510 Specifications: Model: Wille 645 Operating hours: Approx . 9,321 Bucket included Good work light Description:Wille 645 wheel loader is sold with accompanying bucket. The machine was purchased as a 1998 model, but there have been later indications that it may be of an older model. The machine is ready for delivery at short notice. Hours: 9321 Own weight: 5700 Model: 645

Condition: used, Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation -Dimensions: 305/210 / H110 mm -Weight: 4.2 kg Prodsg Td D Hopfx Agwec

Condition: used, empty load weight: 10,960 kg, maximum load weight: 6,040 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2 axles, SAF axles, leaf springs, ABS (anti-lock braking system), flap, doors, portal doors, interior lighting, front support, rear support, side aluminum undercarriage, twin tires, storage box Body: for exhibition hall IN 100 Only sold as a package with exhibition hall IN 100 and trailer IN 62732 !!! Body parts and accessories, light metal pavilion substructure in semi-circular design, foldable terrace, front with plastic double-webbed panel covering, tarpaulin roof covering, rear anchoring on the roof edges of the two semi-trailers, partial seating, stage, cinema, partial rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m, more detailed description available on request! New price approx. 500,000! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Pjdoi Rn Ivspfx Agworc - .

Condition: excellent (used), Buderus SE 725 boiler 870kw Podpfxjiqtmws Agwjrc

Condition: used, empty load weight: 10,960 kg, maximum load weight: 6,040 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2 axles, SAF axles, leaf springs, ABS (anti-lock braking system), flap, doors, portal doors, interior lighting, front support, rear support, side aluminum undercarriage, twin tires, storage box Podpfxji Rni Uj Agwerc Body: for exhibition hall IN 100 Only sold as a package with exhibition hall IN 100 and trailer IN 62732 !!! Body parts and accessories, light metal pavilion substructure in semi-circular design, foldable terrace, front with plastic double-webbed panel covering, tarpaulin roof covering, rear anchoring on the roof edges of the two semi-trailers, partial seating, stage, cinema, partial rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m, more detailed description available on request! New price approx. 500,000! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, empty load weight: 8,700 kg, maximum load weight: 8,300 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2 axles, SAF axles, leaf springs, ABS (anti-lock braking system), doors, interior lighting, roller shutter, front support, rear support, side aluminum undercarriage, side door on the right, twin tires, storage box Prjdpfx Agei Rnkcewsc Body: for exhibition hall IN 100 Only sold as a package with exhibition hall IN 100 and trailer IN 62733 !!! Body parts and accessories, light metal pavilion substructure in semi-circular design, foldable terrace, front with plastic double-webbed panel covering, tarpaulin roof covering, rear anchoring on the roof edges of the two semi-trailers, partial seating, stage, cinema, partial rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m, more detailed description available on request! New price approx. 500,000! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: excellent (used), Transport trolley with 2 trays -Stainless steel tub dimensions: 600/400/H220 mm -Design: stable -Dimensions: 540/725/H800 mm -Weight: 30 kg Predpfxeb Uhnks Agwec

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 5 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Dimensions: W 725/480/H 1000 mm Prjdpfx Agjxf Drrjwoc -Weight: 98 kg

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet. Drawer cabinet, sturdy design Pjdswx Ebkjpfx Agwsrc -9 drawers: division/height see photos -lockable: without key -Dimensions: W 715/725/H 1000 mm -Weight: 176 kg

Condition: excellent (used), Drum for Doppstadt SM 725. Length of the drum: 7.00 m Diameter of the drum: 2.50 Predpfxewrzgpo Agwsc Hole size: 25x25 mm and 150 mm, round, currently completely closed for use as mixing drum

Condition: new, machine/vehicle number: 1f4581c873ed977cb9602039b, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis semi-trailer container Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Container mounts: 1 x 20 foot centered (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container lock in the longer version 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Side collision protection Aluminum underride guard Half-shell mudguards with anti-spray flaps according to EG VA drip tray with 1 1/4 inch drain pipe + 1 1/4 inch stopcock, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between drip tray and side member 4 hose trays approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 outside + 2 x DN 160 centrally arranged, rear hose box (stainless steel) 300 mm deep, splash-proof, cover (stainless steel) with rubber seal all round, with drain hole at lowest point, then without cover on hose pipes 1 stainless steel earthing lug at the rear in FR on the right of the frame, with international earthing sticker on the frame, Steps at the rear right on the underride guard, at the rear in FR right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide, Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line Pedoi Rixkspfx Agwjrc EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of approval / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Approval according to ADR acc. to 9.1.1.2 of ADR, EX/II, EX/III / certificate of approval for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign at the rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Contour marking with refle

Condition: used, Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Pedpfx Agjxnpnkjworc Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Condition: used, Empty weight: 73 kg Part suitable for: cars Type number: A7252708319, R7252710804, 725121 C206 W206 HYBRID Occ versnellingsbak W206 C206 Mercedes Podpfjximw Esx Agwsrc OEM : A7252708319, R7252710804, 725121, 725.121 Article nr.: N113004200-veiling Used gearbox Mercedes 725

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control Podjxc In Sspfx Agwsrc

Condition: repair required (used), Year of construction: 2009, Jenz BA 725 DL chipper Year of manufacture: 2009 Technical condition: to be repaired Prodotp N Udspfx Agwsc To repair hydraulics, minor mechanical repairs, other components in good condition, complete. Mercedes OM 444 A engine in perfect condition, very low mileage.

Condition: excellent (used), Drum for DOPPSTADT SM 725. Length of the drum: 7.00 m Diameter of the drum: 2.50 m Hole size of he drum: 60x60 mm Prjdpfewrzknsx Agwec

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 725mm/460mm/460mm, speed: 10000rpm, tool holder: SK40, tool magazine: 24 places, max. tool diameter/length: 100mm/300mm, max. tool weight: 7kg, tool change time: 2s, table dimensions X/Y: 760mm/420mm, max. table load: 400kg. Dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 3600kg, control: Heidenhain TNC 620. Defects: Compact inverter with integrated controller and PLC, door switch, both work area lamps, X-axis ball screw and roller bearings. Including chip conveyor. Documentation available. On-site inspection is possible. Prjdpfx Agjttmplswoc

Condition: good (used), functionality: fully functional, Set of spare parts for CAZENEUVE HB 725 lathe. Includes: * Steady rest diameter: 320 mm: EUR 1,500 (excl. VAT) * Complete gearbox: EUR 1,800 (excl. VAT) * Tumbler gears (LIRE): EUR 350 (excl. VAT) * Tailstock handles: EUR 150 (excl. VAT) * Chip tray (for HB725x1000 mm): EUR 800 * Faceplate dia: 520 mm: EUR 400 (excl. VAT) * Aluminium handwheel for longitudinal carriage: EUR 200 (excl. VAT) * Compound rest: EUR 500 (excl. VAT) * Square toolpost: EUR 390 (excl. VAT) Pedpew Anb Iofx Agwerc * Set of sheet metal covers: EUR 400 (excl. VAT) * Tailstock MT5: EUR 80 (excl. VAT) * HB725 nameplate: EUR 100 (excl. VAT) * V-belts HB725 (all 8): EUR 150 (excl. VAT) * Cross slide stop: EUR 120 (excl. VAT) * Belt guards: EUR 190 (excl. VAT) More pictures upon request. Shipping available at extra cost.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: -, travel distance X-axis: 725 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, Equipment: rotational speed infinitely variable, Travel paths X/Y/Z: 725mm/460mm/460mm, Work table: size LxW 760mm x 420mm / table load capacity 450kg, Main drive: power 10kW / infinitely variable speed range 10–8,000 rpm / tool holder SK40, Tool magazine: 20 stations / max. tool diameter 100mm / max. tool length 200mm / max. tool weight 7kg, Basic machine data: machine base made of cast iron / weight 4,000kg / machine dimensions (LxWxH) 2.2x2.2x7.6m / electrical connected load 16kVA / compressed air requirement 260l/min – 6 bar, Siemens CNC control, Siemens/Heidenhain digital drives, incl. various tools. Podpfx Agjwzl I Neworc

Condition: new, Year of construction: 2025, General information Field of application: Construction Serial number: 20250205015 Weights Empty weight: 1.836 kg Functional Prjdpfewyzxzox Agwsc Generator capacity: 725 kVA CE mark: yes Other information Frequency: 50 Voltage: 400 Transport dimensions (LxWxH): 1,7x0,9x1,45 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Flywheel size: SAE0/18'

Condition: ready for operation (used), Fagor MOCA-725 Vers. 09A Length scale with MC-A reading head Vers. 30A SN: 118001318050738 - total length: 82,5cm,used, good condition, 100% working, scope of delivery according to photos Prjdpfx Aot Nbzfsgwjc

Year of construction: 2025, condition: new, Screening drums suitable for all common screening machines such as Doppstadt SM 314/ SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - Smallest webs - Welded-in helix - in various material thicknesses Prjdpfxjwxrm Ts Agwsc - Sharp-edged perforated sheets of the highest quality - Perforated sheets made of special steel We deliver our drums free of charge. Many models in stock with no waiting time.

Condition: new, Siemens 6FM1725-3BA00 WF 725 B , E-Stand A06, software version 1.8, unused, 100% functional Psdpfx Aoi Ed Iaogwsrc

Condition: new, Heidenhain RON 425B.0015-1250 ID: 256 080 73 SN: 5 725 465, unused in opened original packaging, 100% functional, scope of delivery as per photos Prjdpfxji Eaw Re Agwsc

Condition: ready for operation (used), Fagor MOVCA 725 length scale version 07A 18A SN: 1301019391 with NMVC reading head version: 18A - total length: 82.5cm, used, good condition, 100% functional, scope of delivery as per photos Psdpfxst Nbzls Agwsrc