Used Hot Holding Equipment for sale (50,583)

Year of construction: 2020, condition: excellent (used), Punching capacity 165 t max. paper size 760 x 600 mm KAMA ProCut 76 Hot Foil Premium edition Year of construction 2020 Total counter: approx. 2.6 million Equipment packages: Premium Edition: AutoRegister, pneumatic die clamping (only 76 series), punching force indicator with overload protection, universal clamping frame, clamping frame rack, vacuum pump and compressor. Iijdpowzmx Njfx Afijh Accessories for special applications: Servo main drive for asynchronous drive cycle, up to 50% increased machine speed or longer contact time for hot foil pre- gation Technical data: Max. Sheet format: 760 x 600 mm Min. sheet format: 279 x 210 mm Max. Punching format: 743 x 585 mm Material thicknesses: Paper from 100gsm, cardboard up to 1500gsm (approx. 1.8 mm) Production speed: Up to 5,500 sheets per hour Punching force: 165 tons Gripper edge: 10 mm

Condition: new, Year of construction: 2025, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; Iedpfxsvpqp Ao Afisih - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp.

Condition: new, Year of construction: 2025, Introduction Of Jaw Crusher Plant The capacity vary according customer request. And in order to meet the different demands of customers, the production line can equip with cone crusher, dust removal equipment and other equipment. It is suitable for the materials like hard limestone, granite,basalt, pebble, metallurgy slag and artificial sand making work. It is widely used in the industries of hydroelectric, building materials, highway, and urban construction. And according to different technological requirement, various types of equipment can be combined to meet the demands of different customers. Product Advantages of Stone Crusher Machine Plant 1.High reliability, good stability 2.Convenient maintenance, easy operation 3.Low operation costs, wide application range 4.Laminating crushing makes good discharging grain shape We also provide other stone crushing solutions like 1. Vibrating feeder + Jaw crusher + Fine jaw crusher + Vibrating screen 2. Vibrating feeder + Jaw crusher + Impact crusher + Vibrating screen 3. Vibrating feeder + Heavy hammer crusher + Vibrating screen 4. Sand Production Line Ijdpfx Ajq Nyy Esfieih 5. Gravel / Aggregate production line A stone crushing plant for sand and aggregate production involves several stages and equipment. Here's an overview of the process and the main components involved: Process Overview 1. Primary Crushing: Large stones from the quarry are fed into a primary crusher, typically a jaw crusher, which reduces them to smaller, manageable sizes. 2. Secondary Crushing: The output from the primary crusher is further reduced in size by a secondary crusher, usually a cone crusher or impact crusher. 3. Screening: The crushed material is separated into different size fractions using vibrating screens. Oversized material is returned to the crushers for further reduction. 4. Sand Making: For producing sand, the material might be passed through a sand making machine, like a vertical shaft impact crusher, to achieve the desired shape and size. 5. Washing: The final product is often washed to remove impurities and improve the quality of the aggregate. 6. Stockpiling: The finished product is stored in stockpiles before being transported to customers. Main Components of stone crushing plant 1. Jaw Crusher: Used for primary crushing of large stones. 2. Cone Crusher or Impact Crusher: Used for secondary crushing to produce finer aggregates. 3. Vibrating Screen: Separates the crushed material into different size fractions. 4. Sand Making Machine: Special equipment for producing sand. 5. Belt Conveyors: Transport materials between different stages of the process. 6. Vibrating Feeder: Feeds raw material into the crushers evenly and continuously. 7. Sand Washer: Cleans the sand by removing impurities. 8. Control System: Manages the entire process, ensuring efficient and safe operation. Implementing a well-designed stone crushing plant can significantly increase production efficiency and produce high-quality sand and aggregate.

Year of construction: 2023, condition: excellent (used), This Mono Electric 10-Tray Convection Oven (2023) is a modern, energy-efficient baking solution designed for commercial bakeries, patisseries, and food production facilities. Combining advanced airflow technology with precise digital controls, it ensures consistent, high-quality baking results across all trays. Key Features Manufacturer: Mono Equipment Model: ECO-Touch / 10-Tray Electric Oven Year: 2023 Capacity: 10 baking trays (standard 18” x 30”) Construction: Full stainless-steel body and interior Glass door with viewing window for monitoring bake cycles Touchscreen control panel with programmable baking profiles Integrated LED interior lighting Even air distribution via high-efficiency fan and venting system Automatic steam injection for professional bread and pastry baking Mounted on stainless stand with tray rack underneath Castor wheels for easy mobility and cleaning access Specifications Power supply: Electric Voltage: 3-phase Trays: 10 Dimensions Overall Unit: Height: 1920 mm Width: 780 mm Depth: 1140 mm Oven / Main Wash Chamber: Height: 1010 mm Width: 420 mm Depth: 650 mm Left-Side Lower Section: Height: 410 mm Iisdoxpf Icopfx Afish Width: 425 mm Depth: 770 mm Right-Side Lower Section: Height: 410 mm Width: 210 mm Depth: 770 mm Condition Excellent condition — lightly used 2023 model Fully tested and in perfect working order Clean stainless finish, minimal cosmetic wear

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 567 h, load capacity: 2,500 kg, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 410 Ah, battery voltage: 80 V, empty load weight: 4,100 kg, total height: 2,160 mm, total length: 2,503 mm, total width: 1,150 mm, Equipment: sideshift, Manoeuvrable and exceptionally high-traction electric forklift equipped with a lithium-ion battery. The forklift is suitable for both indoor and outdoor operation. Lithium-ion batteries ensure easy and cost-effective operation. The forklift features user-friendly controls and extremely simple and inexpensive maintenance. 80V, 410Ah lithium iron phosphate (LFP) battery with integrated Battery Management System (BMS). 80V, 200Ah high-power charger (three-phase) ZAPI (ITALY) electronic controller Battery operating time: 8 hours; charging time: up to 2 hours CASCADE side-shift forks Large wheels for excellent ground clearance Small turning radius IPX4 water resistance rating Pneumatic seat LED lights Specification: Forklift type: Electric forklift Product code: 11013 Model: EFL252 Year: 2022 Lifting capacity, kg: 2500 Mast type: Duplex Lifting height, mm: 3000 Isdpjxnrycofx Afioih Operating hours: 567 Country of origin: China Weight (kg): 4100 Dimensions (L x W x H, mm): 2503 x 1150 x 2160 Overall height, mm: 2160 Forklift attachments: Side-shift, front windscreen, wipers, battery charger Note: The forklift has been inspected and is technically sound. A full technical service will be carried out prior to delivery.

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Iedpfxsp H Swds Afieih Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Fair Demonstration Machine, Brand New Machine at an Unbeatable Price! The machine on offer is a new 2025 demo model that was exhibited at the EMO trade fair in Hannover in September 2025 and is now looking for its first owner. This is a brand new machine! Demonstration system! The original list price of this machine is €295,000. Our exceptional one-time offer for this machine is €210,000! Including delivery within Germany, installation, and training. No hidden additional costs. The machine will be available for inspection from October 2025 and testing from December 2025. Sample cuts and cutting videos are available. Machine description below: G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system with top-quality components and unmistakable design. Cutting Area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Max. Speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Max. sheet weight [kg/table]: 2,150 Available laser powers: 6 kW, 12 kW, 20 kW, 30 kW Cutting Capacity – Quality Cut/Separation Cut Steel: 30mm/40mm Stainless Steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm For processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for optimal laser safety Compact design saves shipping costs and shortens installation time Hollow structure design, suitable for up to 60 kW Improved accessibility via full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for heavy materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated electrical cabinet and laser source with maintenance-friendly access Various automation solutions available Rapid service response thanks to Remote Service feature Fully enclosed machine with OD5+ laser safety glass windows CE compliant The electrical cabinet, laser source, pneumatic system, lubrication system, and table drive motors are fully integrated within the main machine frame. Easy visual inspection via the side sliding door Comfortable loading and unloading via the side sliding door Simple cutting of a wide range of small workpieces Faster response times for demo cutting Higher Dynamics & Productivity Iisdexlt Hfjpfx Afieh Thanks to the optimized machine bed and extruded aluminum gantry, equipped with the fast real-time "Han’s 901 (Rexroth)" controller and powerful Rexroth motors, the HF Expert achieves very high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drivers: Rexroth, Germany Cutting head: Han’s Laser Linear guides: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Year of construction: 2008, condition: new, Type: XZF / QA90L4A Serial number: Power: 0.33 MPa / 1.5 kW Speed: / 1.390 rpm Iiodpsizz D Tofx Afioh Diameter top: Weight: 210 kg Dimensions: mm Condition: unused

Condition: new, Year of construction: 2025, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. Iijdpfx Ajvlwkxefioh -Construction: Delivers materials for concrete, plaster, and other applications.

Year of construction: 2021, operating hours: 150 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 8389-5709, Cardboard and textile plotter, 2 tool holders, e.g. for creasing and cutting, working area 3x1.5 m, textile cutting device with roll processing, vacuum table. Iijdpfx Asxlm Enefish

Condition: good (used), axle configuration: 3 axles, loading space length: 8,170 mm, loading space width: 2,440 mm, first registration: 04/2010, suspension: air, tire size: 385/65-R22.5, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - ADR - BPW axles - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Notes = 2010 TURBO'S HOET 20FT/30FT galvanized ADR chassis, BPW Eco-Plus axles with disc brakes, ABS/EBS, ADR (FL, AT) valid until 16.05.2025, 5x ALCOA rims (rear right = steel rim), 1st axle = lift axle, unladen weight: 3,870 kg, max. permissible weight: 39,000 kg, 385/65-R22.5 tires (L: 5/6/3 mm; R: 7/2/2 mm), Belgian registration with valid technical inspection until: 16.05.2025 = Further information = Axle configuration Tyre size: 385/65-R22.5 Brakes: disc brakes Suspension: air suspension Rear axle 1: alloy rims; lift axle; max. axle load: 9,000 kg; axle make: BPW Eco-Plus; tyre tread left: 35%; tyre tread right: 45% Rear axle 2: alloy rims; max. axle load: 9,000 kg; axle make: BPW Eco-Plus; tyre tread left: 40%; tyre tread right: 15% Rear axle 3: alloy rims; max. axle load: 9,000 kg; axle make: BPW; tyre tread left: 20%; tyre tread right: 15% Dimensions Dimensions (L x W x H): 940 x 248 x 135 cm Iodpfxsv Aakij Afieih Weights Unladen weight: 3,870 kg Payload: 35,130 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: TURBO'S HOET OC/3AT/39/03BSRM Condition Technical condition: good Visual condition: good

Condition: used, axle configuration: > 3 axles, first registration: 01/2024, suspension: steel, color: other, Year of construction: 2024, Suspension: leaf suspension Isdpfxsxgyh Ee Afisih Damage: none

Condition: good (used), functionality: fully functional, Year of construction: 2022, operating hours: 102 h, load capacity: 1,200 kg, lifting height: 2,700 mm, fuel type: electric, Electric high-lift stacker EP Equipment, EST 122, year of manufacture 2022, 102 operating hours, lifting height 2700 mm, 2x 12V batteries, load capacity 1200 kg, electric drive, weight 535 kg, serial no. 4311306436, incl. charger. Iodpfx Asxftbpofijih

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Iijdpjxd D Nzjfx Afijh

Condition: used, Year of construction: 2023, Lifting height ca. 4.500 mm weight 1065 kg battery 24.0 V electric work platform like NEW with only about 10 operating hours (!!) Equipment: - mobile electric scissor work platform - for working at great heights - quick and effortless access to higher work areas Iodpjxacf Hofx Afisih - large work surface - electro-hydraulic lifting height adjustment (infinitely variable) - operation of the chassis + lifting frame effortlessly using a joystick * alternatively from the ground - chassis offers high mobility and stability - charging cable included in delivery

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Ijdpfxjw U A H Io Afieih Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: good (used), axle configuration: 3 axles, loading space length: 8,170 mm, loading space width: 2,440 mm, first registration: 05/2008, suspension: air, tire size: 385/65-R22.5, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = 2008 TURBO'S HOET 20FT/30FT ADR swap body chassis, SAF axles with disc brakes (INTRADISC), ABS/EBS, ADR (FL, AT, OX) valid until 30.05.2025, 1st axle = lift axle, unladen weight: 3,720 kg, max. total weight: 39,000 kg, 385/65 R22.5 tyres (left: 2/12/6 mm; right: 8/14/11 mm), Belgian registration. Iedpjv Aakpsfx Afijih = Further information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; max. axle load: 9,000 kg; tyre tread left: 15%; tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; tyre tread left: 75%; tyre tread right: 90% Rear axle 3: Max. axle load: 9,000 kg; tyre tread left: 40%; tyre tread right: 70% Dimensions Dimensions (L x W x H): 940 x 248 x 135 cm Weights Unladen weight: 3,720 kg Payload: 35,280 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: TURBO'S HOET OC/3AT/39/03BSRM Condition Technical condition: good Visual condition: good Further information Please contact Arne Honingh for more information.

Condition: used, axle configuration: 3 axles, first registration: 07/2020, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2020, Axle configuration Refenmaß: 385/65 R22.5 Axle brand: SAF Iijdpsxgybfefx Afish Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 20%; Tire tread right: 20% Rear axle 2: Tire profile left: 10%; Tire profile right: 10% Rear axle 3: Tire profile left: 10%; Tire profile right: 10% Weights Unladen weight: 5,940 kg Payload: 32,060 kg GVW: 38,000 kg Condition Damage: none

Condition: new, power: 161.81 kW (220.00 HP), fuel type: diesel, Year of construction: 2024, For Sale: High-Performance NEW BUILD Dredger Perfect for Dredging in Marinas, Harbours, Sand & Gravel Mining Are you looking for a reliable floating dredger to meet your dredging needs? This high-efficiency with low cost suction dredger is ideal for a wide range of applications, including marinas, harbours, and mining operations. Key Features: Powerful Suction System: Ideal for dredging sand, gravel, slurry, and more. Iodpfsu Afi Ijx Afijih Versatile Applications: Perfect for clearing harbours, marinas, and inland waterways. Durable Construction: Built for long-term use in harsh marine environments. Efficient Operation: Maximize productivity in mining and excavation projects. Specifications: Dredging depth: 10 mtr (can be customized to 15 mtr dredging depth) Pump capacity: 450m3/h Engine power: 220hp Suction pipe diameter: DN200 Whether you're managing a marina, expanding a harbour, or working on a sand and gravel mining project, this suction dredger provides the performance and reliability you need. We design and build new dredging equipment, and we also have used dredgers on stock. Contact us today for pricing and more details!

Condition: used, axle configuration: 3 axles, first registration: 11/2020, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2020, Axle configuration Refenmaß: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 10%; Tire tread right: 10% Rear axle 2: Tire profile left: 15%; Tire profile right: 15% Rear axle 3: Tire profile left: 20%; Tire profile right: 20% Iodpfsxgx H Tox Afijih Weights Unladen weight: 5,940 kg Payload: 32,060 kg GVW: 38,000 kg Condition Damage: none

Year of construction: 2022, operating hours: 0 h, condition: new, A highly efficient sand mining dredger with a production capacity of 450 m3/hour is available for new build. This dredger is powered by a Doosan engine (150 kW), and an outer diesel-driven engine can also be used. It can dredge up to 15 meters deep and comes equipped with four hydraulic winches, a water jet pump system, and 150-meter discharge pipes. The dredger's main pontoon dimensions are 6x2x1 meters, and the side pontoons are 11.50 meters long. It is designed for use in shallow waters such as rivers, lakes, channels, docks, and similar environments, making it ideal for cleaning reservoirs, sand stocks, mining arrays, piers, and harbors, particularly when the sand layer is soft. This dredger is easy to transport as it can fit into a single 40ft container. In addition to building new equipment, we also have used machines in stock. Contact us with your project, and we will recommend the best solution for you. Iedpsh Ayk Asfx Afieih

Condition: used, axle configuration: 3 axles, first registration: 03/2023, suspension: air, color: other, Year of construction: 2023, Axle brand: BPW Iisdpexgx Hyjfx Afieh Brakes: Disc brakes Rear axle 1: Steered Rear axle 2: Suspension: Air suspension Rear axle 3: Suspension: Air suspension Damage: None

Condition: used, axle configuration: 3 axles, first registration: 07/2020, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2020, Axle configuration Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Reference dimension: 385/65 R22.5; Tire tread left: 10%; Tire tread right: 10% Rear axle 2: Refenmaß: 385/55 R22.5; Tire profile left: 15%; Tire profile right: 15% Rear axle 3: Reference dimension: 385/55 R22.5; Tire tread left: 45%; Tire tread right: 45% Weights Unladen weight: 5,940 kg Iedpfoxgxkrsx Afieih Payload: 32,060 kg GVW: 38,000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 10/2008, suspension: air, color: other, tire size: 385/55 R22.5, Year of construction: 2008, Axle configuration Tyre size: 385/55 R22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 8 mm; Tyre tread right: 8 mm Rear axle 2: Tyre tread left: 6 mm; Tyre tread right: 6 mm Rear axle 3: Tyre tread left: 6 mm; Tyre tread right: 8 mm Weights Iiedpfsxgw Ebjx Afioh Unladen weight: 8,460 kg Payload: 30,540 kg Gross vehicle weight: 39,000 kg Condition Damage: none

Condition: new, axle configuration: 3 axles, suspension: air, color: other, tire size: 385/65 R22.5, Year of construction: 2023, Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Isdpfjv A Tx Hsx Afisih Rear axle 1: Left tire profile: 100%; Right tire profile: 100% Rear axle 2: Left tire profile: 100%; Right tire profile: 100% Rear axle 3: Left tire profile: 100%; Right tire profile: 100% Damage: None