Used Hot Water Shrink Tunnel for sale (20,551)

Condition: used, Year of construction: 2005, Shrink-tunnel Additional title: with 2 parallel belts (incl. sleeve fit control) Air volume: 700 m³/h Hnodpfx Ahjvcq E Do Nog Engine speed: 900 rpm Power: 0,25 kW Length: 3 m Width: 1,25 m Height: 2,1 m Weight: 500 kg Operation / Control: with control panel for each conveyor Features: Two parallel conveyors going through the unit coming from 2 sleevers, optical sleeve fit control with conveyor stop

Year of construction: 2004, condition: like new (used), Rochman Stainless shrink tunnel Model: TRX65 Hodpsd S Tu Defx Ah Nsng Serial: 2511004 Stainless shrink tunnel, stainless mesh belt, belt dimensions 1800mm x 650mm, max product height 400mm, variable speed, variable temperature, 3Ph

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube Hjdpfx Ahotywzqj Nsng MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: new, Year of construction: 2014, I sell the Hot Air drying tunnel BURKLE Hnjdpfx Aer Arrwsh Neg Modell: Easy Dry JET 1300 Filter: TRDUE / 700 m3/hr. Ventilator 7,5kW / 6800m3/hr. / 35 m/s Working width: 1400mm Total length: 6,00m Elektric connection 36,5kW Heating system 12 blowing units Heating medium water up to 80°C Max. Heating power 45 kW Max. Temperature of heated surfaces 120°C Siemens Simatic Touch control panel Year 2014. Machine NEW, not used before ! Available immeditely.

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: Hnedpfx Ahsg A Rhke Neg • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments;

Condition: ready for operation (used), Year of construction: 2020, Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible. Hnedeu Rn Agepfx Ah Nog

Year of construction: 1989, condition: used, Standard equipment Hsdobriv Njpfx Ah Njng

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Carrera 2000 PC Hodpfxed I Ncgs Ah Nong stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: used, Year of construction: 2023, Shrink tunnel 50 Twin with double blower Hodpjuaklmjfx Ah Nong Equipment - Manual height adjustment of the conveyor belt - Digital control panel with 9 selectable and personalized programs - Possible selection of automatic roller rotation - Adjustable air flow - Cooling program - Outfeed roller conveyor as standard - Two independent chambers with temperature control Technical data - Connected load - 380/400 V / 3 ph - Tunnel inlet dimensions - 450 x 210mm - Max. Product dimensions - width 400 mm / height 190 mm - Machine dimensions - 2,130 x 800 x 1,460 mm - Weight - approx. 260 kg ALSO AVAILABLE IN INNOX VERSION !!!

Condition: good (used), Kärcher HDS 13/35 trailer, 2017, 2400 operating hours, new service 04/25, Hodpfx Ahew D D H As Njng

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C Hnodpfx Aefdkcgoh Njg TECHNICAL DATA: - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW triple plunger pump with ceramic plungers - Hour counter - Pressure gauge - Pressure regulator - Safety valve - High-quality frame made of painted steel, also available with forklift sleeves - Stainless steel covers - Magnetic descaling device - incl. frame for water tank, 500 l water tank - incl. basic accessories such as 20 m high-pressure hose, spray gun, lance, and 25° fan nozzle - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available on request

Condition: excellent (used), Hugo Beck SL 412/25 Shrink tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulation fan Cooling fan 2 x control heating 1 x basic heating 1 x additional heating with chain transport Dimensions Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm Hnedpfx Aep H T Iuoh Nog You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Hodpfx Aod S Svhsh Nong Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification

Year of construction: 2013, condition: good (used), Sleevit Shrinkmaster 750 Shrink tunnel Hnsdon E Ttpopfx Ah Neg Serial: RC011075 2013, heat shrink tunnel, adjustable temp controls, mounted over stainless conveyor, conveyor dimensions 4300mm x 140mm, variable speed, max product 140mm w x 300mm H, 3ph

Condition: good (used), Year of construction: 2019, operating hours: 1,500 h, functionality: fully functional, total length: 2,420 mm, total height: 1,650 mm, total width: 13,600 mm, type of input current: three-phase, product height (max.): 250 mm, product width (max.): 630 mm, input voltage: 400 V, overall weight: 710 kg, power: 29 kW (39.43 HP), Ulma shrink tunnel. Only used as a replacement machine. Very good condition. Speed: 3 - 14.5 m/min | Double heating chamber | Dimensions: 2,420 x 1,360 x 1.650 mm | Weight: 710 kg | AIR FLOW CONTROL THROUGH FREQUENCY CONVERTER AND SOLID STATE RELAY | SHRINK TUNNEL PRECHAMBER AT INLET AND OUTLET | 220 MM HIGH CHAMBER | LEFT VERSION, PRODUCT RUNS FROM RIGHT TO LEFT | SELECTION FOR PURE "TRANSPORT MODE". Hot air fixation tunnel, an ULMA shrink tunnel model designed for shrinking film around previously packaged products. (Products previously packaged in side sealers, banding machines, flow wrappers, overlapping machines or any other packaging machine). Tunnel with high heating capacity, low consumption and low heat loss. Solid painted tubular steel frame. Easy integration into existing lines. Height-adjustable machine feet and wheels for installation and transportation. Product flow of the machine from right to left. Movable rollers with silicone coating. Electronic temperature control. Control of the transport speed. Air is evenly distributed inside the chamber, guaranteeing great energy savings. Hnjdpfotva Sgsx Ah Nsg Maximum insulation to reduce heat loss. Electric cabinet with ventilation. Protective devices and safety systems in accordance with CE standards. Consumption: 14.5 KW/h

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Hnsdpfx Ahowz Scae Nsg

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection Hodpofh Skaofx Ah Njng The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°.

Year of construction: 2010, condition: good (used), Secomak Shrink tunnel Hnedon E Ttlopfx Ah Nsg Serial: 6905 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph

Condition: good (used), Falch T3H, 600 operating hours, new service, 300 bar hot water, very well maintained, 1996 Hnedpfewxm Ewex Ah Nsg

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), The HDT50 in the hot water trailer version covers a pressure of 230 to 500 bar at a flow rate of 33 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, electrically operated hose reel, remote control, etc.. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Model Pressure Flow rate HDT50-230 230 bar 80 Lpm HDT50-400 400 bar 40 Lpm HDT50-500 500 bar 33 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Hodpfjhgbkuex Ah Njng Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: used, Meurer heat shrink tunnel adjustable temp, variable speed, aperture 400mm x 350mm, mobile frame, Hsdpfxodmn Umo Ah Nong

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, parking feet, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12,6kW JTR-H 23/350 | 23l/min. at 350bar | Motor: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Motor: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Motor: Kohler KDW 2204 37,5kW - Dimensions: 3.370 x 1.640 x 1.540 - empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual with max. 30 m. 1/2" or 100 m. 3/8" hose (included) - Water supply reel: manual with 50 m. 3/4" hose - Water tank: 600 l - Diesel tank: 75 l - Anti-lime pump with tank Hnedpsfdvkzofx Ah Njg - 75 kW heating module - Options and accessories on request

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Belt width: 500 mm, infeed and outfeed height of objects to be dried: approx. 100 mm, length of insulated drying hood: 1500 mm, total channel length: 2000 mm, Leister hot air blower: 1 unit, heating power: 3100 watts, air volume: 550 l/min, belt drive steplessly adjustable from 0-4 m/min, with base frame made of aluminum profiles, optionally with adjustable leveling feet or castors. Required connection: 400V, 50Hz. Hnjdexwk Hajpfx Ah Nog For drying printed small parts, with insulated drying hood, mounted and adjustable LEISTER quality hot air blower, steplessly adjustable belt drive, conveyor belt made of PTFE-coated mesh belt, base frame made from aluminum profiles. The drying tunnel is used but in very good condition.

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS Hedpfx Aju Nu Hioh Neng voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: ready for operation (used), HUGO BECK high-performance shrink tunnel type SLB 5012/25, pass-through width: 500mm, pass-through height: 230mm, tunnel hood length: 1200mm, working height: adjustable from 850mm +/- 50mm, maximum temperature: 250°C, rod chain conveyor infinitely adjustable from 5 to 30m/min. Inspection possible by appointment. Hsdpfx Ahext Rlbj Neng