Used Horizontal Drilling for sale (10,402)

Condition: used, Model: SH75 Serial No: 7076 Pgsdpfx Ajzrm T Eofuer Capacities: Rotary Table Size: 1000 x 1000mm Maximum Table Load: 2000kg Vertical Traverse: 1000mm Cross Traverse: 1245mm Longitudinal Traverse: 1000mm Spindle Diameter: 75mm Spindle Traverse: 508mm Spindle Speeds: 5.6- 1120 rpm Spindle Taper: 40 int Facing Head Diameter: 508mm Facing Slide Traverse: 180mm Facing Head Speeds: 5.6 – 280rpm Feeds, X, Y & Z: 0.75 – 2500mm/min Feeds, Spindle & Face: 0.25 – 830mm Screw Cutting to Table: 2 – 10mm Pitch, 4 – 16 TPI Motor: 7.5kw Electrics: 415v, 3ph, 50 Cycles Complete with: Screw Cutting, 3 Axis DRO, Steel Telescopic Guards, Operator Safety Guard, Pendent Control, Power Draw Bar, Safety Brake, Facing Head Lock, Spindle Support Bearing, Facing Slide Tool Holder Selection of Spindle Tool Holders, Lovo Light Approximate Dimensions: 4200 x 2940 x 2950mm Approximate Weight: 10,500kg

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl Speed : 25000 rpm Movement X/Y/Z : 200/350/300 mm Tool holder : HSK 40 In General: Year of manufacture:2022 Control system:Siemens 840 Dsl Travel ranges X/Y/Z:200/350/300 mm Speed:25,000 rpm Tool holder:HSK 40 Spindle: Technology:2 motorised spindles Spindle centre distance:200 mm Speed:25,000 rpm Tool holder:HSK 40 Double-swivel mount: Technology:A-axis or U-axis with counter-bearing Drive:Direct drive (torque motors) Loading module: Technology:Industrial robots Manufacturer:Fanuc Model:LR Mate 200iD Gripper:Double gripper Workpiece marking:Needle embossing station (DMC) Workpiece feed: Technology:L-shaped infeed and outfeed conveyor Workpiece carriers:20 Dimensions:190 x 150 x 15 Workpiece capacity:20 Dimensions:220 x 160 x 240 mm Equipment: Pgodpjzrkn Tsfx Afusr Tool magazine:40 positions (2 × 20) Position measurement systems:Direct on all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 80 bar Hydraulic clamping:3 clamping circuits per side Automatic rinsing cycle:Workpieces + clamping device Contact monitoring:Pneumatic Tool breakage monitoring:Inductive

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: 202101410, For sale: a brand-new, unused Junya horizontal car wash – Chinese-made, purchased in 2022. It was bought to set up a second lamination line, but this plan was not implemented. The machine is assembled and ready for use in the workshop; all that is needed is to fill it with water. The machines are of very good quality and operate reliably across three shifts. Price: PLN 95,000 net. Pgsdpfjzqtbyex Afuer Terms negotiable.

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. Podpfx Aozq S Ncefujgr With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Coolant tank 150 l Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Material support height 700 mm

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel Pgedpfx Afsxabhaoujr - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual Pgsdpfxexabhme Afujr

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop Podpfxexabtvo Afuogr - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: like new (used), Year of construction: 2014, Horizontal machining center OKK Rotary pallet Type HM6300S Year 2014 Pgsdpfxezr Ih Ds Afuer CNC Fanuc series 31i-model B5 60-tool magazine Chip conveyor Approximately 30 tool holders with ISO 50 connection Tilting and forklift-compatible chip bin from GOUBARD Inspection points with shelves and lighting Double-sided tool display stands Buffer tank Aluminum structure platform

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Pgedpfxezb Il Ne Afuer Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 2006, number of heads 4 Pgedpfx Afezr Rpwsuer serial no. 103245 voltage 380 V

Condition: good (used), operating hours: 200 h, functionality: fully functional, machine/vehicle number: H05107, Bench drill press Knuth SSB 50nSuper MK 4 WORK AREA Drilling capacity 50 mm Threading capacity, steel M 30 Table clamping surface 580 mm x 460 mm Quill stroke 200 mm Manual table travel 515 mm Motorized table travel 405 mm Table swivel range (max.) ± 50° Column diameter 180 mm Pgjdozqt U Hopfx Afuor Distance from spindle nose to table surface 575 mm Distance from spindle nose to base 1165 mm Overhang 360 mm MAIN SPINDLE Speed range 50 rpm - 2000 rpm Spindle taper 4 MK FEED Quill feeds 0.08; 0.12; 0.17; 0.24; 0.35; 0.50 mm/rev

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 580 mm z-travel 580 mm control SEICOS 16M B-axis (table) 360 x 1° mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min turning speed range - stepless 35 - 12.000 Nm spindle drive 22,00 kW Podozugf Tepfx Afujgr max. torque on the spindle 236 tool taper BT40 toolpiece magazine: chain magazine 61 Stück size of pallet 2x 400x400 mm max. workpiece diameter 630 mm workpiece height max. 680 mm workpiece weight max. 400 kg total power requirement 30,00 kW weight of the machine ca. 12,00 t dimensions of the machine ca. 4,00 x 3,50 x H3,00 m With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 Horizontal Machining Center Spindle cooling Maximum spindle speed: 7000 rpm Z- 1000 mm X- 1300 mm Y- 1100 mm Tool magazine for 80 tools 1 spindle, 2 pallets, 800x800 mm cubes, x-z-y-b, 4-axis Pjdeyuyfhepfx Afuogr

Condition: used, Year of construction: 2018, power: 29.5 kW (40.11 HP), overall weight: 2,160 kg, Due to internal restructuring, we are offering the following machine from our inventory for sale: Description: HDD drilling rig Machine type: Grundodrill 4X Serial number: 4X1826295M Year of manufacture: 2018 Weight: 2,160 kg Engine power: 29.5 kW Maximum operating pressure: 310 bar Length: 3,500 mm Width: 1,200 mm Height: 1,710 mm Podsy Nmffepfx Afusgr Maintenance and service were recently carried out by TRACTO. The unit is in working condition. Interested parties are welcome to submit their price expectations or make an offer. If you have any questions or require further information, please send us a message or give us a call.

Condition: used, total width: 1,300 mm, total length: 1,750 mm, total height: 2,400 mm, Colour: Grey Empty weight: 2.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 955 - Drive system: Conventional - Positieklemming: Hydraulic - Arm length [mm]: 1570 Pgedozrgc Hjpfx Afujr - Y-axis travel [mm]: 1320 - Table length [mm]: 650 - Table width [mm]: 1300 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 0 - Min. Reach [mm]: 300 - Max. Reach [mm]: 1100 - Tool holder: MK4 - Min. spindle speed [rpm]: 102 - Max. spindle speed [rpm]: 2000 - Options: Drill unit feed, Clamping block, Tapping function - Transport dimensions: 1750mm x 1300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Pedozmuntjpfx Afuogr Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. Podsy Iwdpopfx Afusgr The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Pedjzncnkopfx Afusgr Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1438-135-1203, Offer 25251 Technical Data: - Drilling capacity in steel ST 60: 45 mm - Drilling capability in steel ST 60: 55 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 200 mm - Infinitely variable spindle speeds: 60 – 1600 rpm - Forward/reverse rotation - 3 feeds with electric magnetic clutch: 0.1; 0.16; 0.25 mm/rev - Throat depth: 360 mm - Max. distance spindle – table / base plate: 775 / 1255 mm - Table with 2 T-slots: 630 x 540 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 2.7 / 4.0 kW - Space required approx.: W 800 x H 2100 x D 980 mm - Weight approx.: 750 kg - Included: - Machine vice Pedpfx Afsw Id Ndjuogr - Quick-action drill chuck 1 - 13 mm - Emergency stop button - Lighting

Condition: good (used), Year of construction: 2005, Offer 26119 Technical data: Podsy D Nxqjpfx Afujgr - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 125 mm - Infinitely variable drill spindle speeds: 80 – 3200 rpm - Thread cutting capability via reversible rotation up to M 20 - Throat: 260 mm - Max. distance table to spindle: 825 mm - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement approx.: W 500 x H 1900 x D 950 mm - Weight approx.: 230 kg - Cross table with handwheels

Condition: good (used), Year of construction: 1975, machine/vehicle number: 16344, Offer 25511 Technical data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling performance in steel ST 60: 32 mm - Thread cutting device - Drill spindle mount: MK 3 long spindle - Drill spindle stroke: 180 mm - 10 spindle speeds: 250 – 2100 rpm - Throat approx.: 290 mm - Max. distance table – spindle approx.: 620 mm - Table with 2 T-slots, height adjustable: 520 x 450 mm - Drive: 400 V / 1.0 / 1.3 kW Pgedpjy Rz Dfofx Afuor - Required space approx.: W 600 x H 1850 x D 700 mm - Weight approx.: 280 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 337978, Technical specifications: - Drilling capacity in steel ST 60: 25 mm - Drill spindle taper: MK 3 - 8 drill spindle speeds: 100 - 2700 rpm - Drill spindle stroke: 130 mm Pjdpfxefmh R Uj Afuogr - 4 feed rates: 0.1 - 0.3 m/rev - Overhang: 270 mm - Column diameter: 115 mm - Drilling unit + table, height-adjustable - with hand crank via rack and pinion - Table dimensions: 350 mm - Drive: 400 V / 0.8 / 1.1 kW - Space requirement: approx. W 800 x H 1850 x D 900 mm - Weight: approx. 250 kg

Year of construction: 2009, condition: good (used), machine/vehicle number: 133, Offer 18291 Hydraulic horizontal bending and straightening machine Technical data: - Bending force: 100 kN / 10 t - Adjustable bending force: 0 - 100 kN - Stroke: 0 - 150 mm - Working width: approx. 200 mm - Stroke speed: 0 - 0.6 m/min - Tool height: up to approx. 100 mm - Bending capacity: - with MW 100 prism, flat material up to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Straightening capacity Wy at a straightening block distance of 1 m: 100 cm³ - Drive: 400 V / 1.1 kW Pgedpjg Ewi Njfx Afujr - Space requirement: approx. W 1100 x H 1000 x D 650 mm - Weight: approx. 400 kg

Year of construction: 1995, condition: good (used), Offer 22054 Technical data: - Drilling capacity - in steel: 15 mm - Drilling capacity - in aluminum: 18 mm - Drill spindle mount: MK 2 - Drilling depth: 70 mm Pgedpfx Ajkt N Nlefusr - Spindle overhang / column: 180 mm - Drill spindle speeds: 80 - 4000 rpm - Drive: 400 V, 0.45 / 0.75 kW - Height-adjustable drilling table: 280 x 240 mm - Distance drill spindle / table: approx. 360 mm - Distance drill spindle / base plate: approx. 410 mm - Space required: approx. W 280 x H 1700 x D 600 mm - Weight: approx. 85 kg - Includes: - Quick-change drill chuck 1 - 13 mm - Machine vise - Assorted used HSS drill bits 5 - 15 mm

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm Pedpfx Afjrwmbgjuogr - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg