Column drilling machine

Ixion

Condition: good (used), Year of construction: 2000, Bench drill, bench drill, column drill, pillar drill Csdpfog Rplwex Aa Eopw -Manufacturer: Ixion, bench drill type BT 6 -Clamping table: 290 x 225 mm -Travel: 150 mm -Spindle mount: drill chuck -Projection: 180 mm -Speeds: 1080 - 12000 rpm 8 levels -Column: diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Motor: AEG 0.37 / 0.6 kW -Voltage: 380V -Dimensions: 640/330 / H740 mm -Weight: 92 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle Cpodpfxsllvr De Aa Eew - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Condition: good (used), Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V Cjdpfx Aask Tuwvs Eopw -Dimensions: 620/235/H800 mm -Weight: 70kg

Condition: used, Year of construction: 2003, machine/vehicle number: 184322, functionality: fully functional, input voltage: 400 V, spindle mount: MK 4, drilling depth: 150 mm, height adjustment type: mechanical, actuation type: hydraulic, rotational speed (max.): 1,400 rpm, rotational speed (min.): 80 rpm, total height: 2,020 mm, throat depth: 280 mm, table width: 400 mm, table length: 550 mm, overall weight: 350 kg, Equipment: CE marking, documentation/manual, For sale is a used column drill IXION / MAXION BS 35 RV, featuring a hydraulic feed, separate hydraulic power unit, control cabinet, and coolant system. The machine is in operational condition. Both hydraulics and spindle run smoothly. Viewing and demonstration under power are possible and expressly encouraged. Collection in 57439 Attendorn, Germany. Forklift available – loading is free of charge. Cpodjyp H D Hepfx Aa Eew _____ Technical Data Drilling capacity: • Continuous drilling capacity: 35 mm • Standard drilling capacity: 40 mm • Drilling depth: 150 mm Geometry: • Throat: 280 mm • Spindle taper: MK4 • Spindle–table distance: 85 – 755 mm • Table size: 550 × 400 mm • T-slots: 14 mm (DIN 650) • Column diameter: 120 mm • Overall height: 2020 mm • Weight: approx. 350 kg Drive / Electrical: • 12 spindle speeds • Speed range: 80 – 1400 rpm • Operating voltage: 400 V • Frequency: 50 Hz Hydraulic feed: • Hydraulic power unit (50 liters HLP 46) • Automatic functions as per manufacturer's specifications All technical data provided without guarantee and based on manufacturer documentation or available information. _____ Scope of Delivery • Drill IXION / MAXION BS 35 RV • Hydraulic power unit + control cabinet • Coolant system incl. 20 L tank and pump • Available documentation, connection cable _____ Legal Notice Sale exclusively to businesses within the meaning of § 14 BGB (B2B). The sale is made excluding liability for material defects. No warranty, no returns. Sale as seen/tested. Subject to prior sale and errors excepted.

Condition: good (used), Year of construction: 2000, operating hours: 83,000 h, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the Marker Arburg and the type 320S 350-60 Year of construction: 2000 Operating hours automatic: 83000 Screw diameter: 25 mm Clamping force: 350 kN Barrel length: 60 Cpsdpfx Aashhuq Ae Eow On request, transport can be organized throughout Europe for an additional charge. Price incl. VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, drilling depth: 1,000 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, The machine must be collected by 16 February 2026 at the latest. The price is only this attractive for this reason. The machine is under power and can be demonstrated. Cjdpeypi Injfx Aa Eopw

Year of construction: 2003, condition: used, machine/vehicle number: 184323, For sale is a used IXION thread tapping machine BT 30 GL E (BT 30 GLE) suitable for series production or workshop operations. The machine is fully operational; on-site demonstration under power is possible and expressly encouraged. Location: 57439 Attendorn Collection by buyer – forklift available, loading free of charge Delivery condition: EXW 57439 Attendorn Technical Data / Equipment (according to documentation): - Thread cutting capacity: M5 – M30 - Thread depth: 90 mm - Working stroke: 90 mm - Rapid traverse: max. 80 mm - Spindle speeds (5 steps): 160 – 880 rpm - Motor: pole-changeable 1.3 / 2.4 kW, motor speed 700/1400 rpm - Power supply: 400 V, 50 Hz, three-phase (5-wire: L1/L2/L3/N/PE) - Reach: 280 mm - Spindle to table: 220 – 600 mm - Table size: 390 × 420 mm - T-slots: 14 mm - Column diameter: 120 mm - Total height: max. 2100 mm - Weight: approx. 370 kg Pneumatics / Compressed Air: Cpedpfxjyn Snhs Aa Ejw - Pneumatic rapid traverse - Compressed air unit included External compressed air supply/plant air required on site Coolant system (included): - Coolant/lubricant unit (electrical; tank/pump/hoses/piping as present) Scope of delivery: - IXION BT 30 GL E / BT 30 GLE as shown - Coolant system included - Available documentation Legal Notice: Sale exclusively to businesses as defined by § 14 BGB (B2B). Sale with exclusion of liability for material defects. No warranty, no returns. Sale as inspected/demo’d. Subject to prior sale and errors.

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Cpedogd Uifjpfx Aa Eow Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Year of construction: 1970, condition: good (used), Type / Model: BST 13 machine number: 37749 drilling capacity: 13 mm spindle mount: MK 2 Speed range: 475 to 2,400 rpm Projection: 190 mm Table: 230 x 220 mm clamping surface: 165 x 170 mm height adjustment: 300 mm Cpsdpfxefir T Uj Aa Eew stroke: 100 mm Total connection: 0,45 kW Accessories/equipment: Multi-spindle drilling head ( 4-fold ) verm. Sigloch & Schrieder condition: good Footprint: 220 x 400 mm Weight: 80 kg Dimensions: 220 x 400 x 820 mm

Condition: ready for operation (used), A bench drilling and tapping machine Ixion including automatic rapid traverse is available. Drilling capacity steel/cast iron: 15mm/14mm, tapping capacity: M3-M10, spindle mount: MK2, quill stroke: 90mm, reach: 215mm, column diameter: 75mm, speed: 1600rpm, table dimensions X/Y: approx. 220mm/285mm, weight: approx. 100kg. An on-site inspection is possible. Cpjdsynluuspfx Aa Eew

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW Cpsdpfx Aehturcea Eow refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster to test under power ! option: warranty, setup, training

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W Codju Tln Nopfx Aa Espw VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Year of construction: 2005, functionality: fully functional, power: 2.3 kW (3.13 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 150 mm, height adjustment type: mechanical, actuation type: hydraulic, rotational speed (max.): 2,800 rpm, rotational speed (min.): 80 rpm, total height: 2,020 mm, throat depth: 280 mm, table width: 400 mm, table length: 550 mm, overall weight: 350 kg, Equipment: CE marking, documentation/manual, For sale is a used IXION / MAXION BS 35 RV column drilling machine with hydraulic feed, separate hydraulic unit, control cabinet, and coolant system. The machine is in ready-to-use condition. Both hydraulics and spindle are running flawlessly. Viewing and operation under power are possible and expressly encouraged. Collection in 57439 Attendorn. Forklift available – loading is free of charge. Technical Data (according to manufacturer specifications) Drilling capacity: • Continuous drilling capacity: 35 mm • Standard drilling capacity: 40 mm • Drilling depth: 150 mm Geometry: • Throat: 280 mm • Spindle mount: MT4 • Spindle-to-table distance: 85 – 755 mm • Table size: 550 × 400 mm • T-slots: 14 mm (DIN 650) • Column diameter: 120 mm • Overall height: 2020 mm • Weight: approx. 350 kg Csdpfeymxppex Aa Eepw Drive / Electrical: • 12 speeds • Speed range: 80 – 1400 rpm or 160 – 2800 rpm • Operating voltage: 400 V • Frequency: 50 Hz Hydraulic feed: • Hydraulic unit (50 liters HLP 46) • Automatic functions as per manufacturer's specifications All technical details are provided without warranty and are based on manufacturer data and available information. Scope of delivery • Drilling machine IXION / MAXION BS 35 RV • Hydraulic unit + control cabinet • Coolant system • Available documentation Legal notice Sale exclusively to businesses as defined in §14 BGB (B2B). The sale is made without any warranty for material defects. No guarantee, no returns. The machine is sold as inspected and/or demonstrated. Subject to prior sale. If you have any questions or require further information, please feel free to send us a message.

Condition: new, functionality: fully functional, Year of construction: 2025, Available in stock Capacity – 500 l. Diesel engine. Self-Propelled. Diesel Burner. Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating the mastic through the thermal oil (thermal oil jacket). Cjdpod Swd Uofx Aa Eepw

Condition: good (used), functionality: fully functional, throat depth: 180 mm, overall weight: 65 kg, spindle speed (min.): 480 rpm, Bench Drill Manufacturer: IXION Model: BT 13 Technical Data: Manufacturer: IXION Model: BT 13 Year of manufacture: Spindle speeds: 480 – 850 – 1400 – 2300 – 4000 rpm Drilling capacity: max. 13 mm in steel Table size (base): 230 x 170 mm Swivel table: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Throat depth: 180 mm Csdpfx Aew Ug Dqoa Eopw T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m All information subject to change and without guarantee. A powered demonstration is possible at any time in our showroom.