Used Hinge Boring Machine for sale (84,854)

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Knedpfx Afoxcgtgjfof Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Knjdpoxpww Aofx Affef Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: like new (used), CNC: FAGOR 8055 (retrofit option with Heidenhain Tnc640) Spindle diameter: 110 mm Tool holder taper: ISO 50-7388/1 - DIN 69871 Milling arbor mounting diameter: 221.44 mm Tool clamping force: 1,600 daN Travel Spindle horizontal stroke (Z-axis): 550 mm Spindle vertical stroke (Y-axis): 1,500 mm Table traverse stroke (X-axis): 3,000 mm Column longitudinal stroke (W-axis): 1,300 mm Table Size: 1,500 x 1,220 mm Maximum load capacity: 4,000 kg Max contouring torque: 250 daN T-slots: No. 7, 22 mm, H7 Rapid table rotation: 3 rpm Table clamping torque: 674 daN Speeds and feeds Spindle motor power: 22 kW Speed ranges: 2 Max torque low range: 105 daN Kjdpfxsxukfqs Affjnf Max torque high range: 31 daN Spindle speed range: 15 - 3,000 rpm Constant torque, low range: 15 – 203 rpm Constant torque, high range: 50 – 680 rpm Constant power, low range: 203 – 895 rpm Constant power, high range: 680 – 3,000 rpm Working feedrates: 2 – 10,000 mm/min Rapid feedrates: 10,000 mm/min Maximum axis thrust: 1,600 daN Tool magazine Number of tools: 60 Chain pitch: 140 mm Max tool diameter: 138 mm Max tool diameter (adjacent pockets empty): 400 mm Max tool length (excluding taper): 400 mm Max allowable tool weight: 30 kg Tool holder taper: ISO 50-7388/1 - DIN 69871 Overall weight: 24,500 kg Machine dimensions (L x W x H): 5,350 x 4,770 x 3,700 mm Machine equipped with: • Brushless motors • Through-spindle coolant • Quill stiffener • Heidenhain linear scales • Operation and maintenance manuals

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, Max. working width: 740 mm Max. pass-through width: 820 mm Kjdpoxuggwofx Affjnf Motor: 2.2 kW 23 drilling spindles Horizontal drilling depth: 120 mm Vertical drilling depth: 80 mm Weight: approx. 350 kg

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Kodpfoxuf Utox Affenf Total height: 2600 mm Weight: 4,5 T

Condition: good (used), Year of construction: 2004, Steuerung: Siemens 840-D Verfahrweg X: 6000 mm Verfahrweg Y: 3000 mm Verfahrweg Z: 1000 mm Verfahrweg W: 700 mm Spindeldurchmesser: 150 mm Spindeldrehzahl: bis zu 2800 U/min Spindelleistung: 51 kW Werkzeugwechsler: 80 Werkzeuge Ksdpoxn R Ncsfx Affonf Vertikalfräskopf CNC-Rundtischgröße: 2000 x 2500 mm Tischverfahrweg V: 1500 mm Tischtragkraft: 25 t 2 Stück Bodenplatten Späneförderer Automatischer Kopfwechsler KF-D4 vertikaler Einachsen-Fräskopf, 2,5° programmierbar

Condition: excellent (used), Blum hardware hinge drill Minipress Number of drills 5 Mounting of drills with quick couplers Motor power 0,75kw Pneumatic pressure Pneumatic stroke of the aggregate Kodpfjuz Tc Hjx Affonf Maximum thickness of workpiece material 40mm

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Ksdpeu Dahnjfx Affjnf Weight - 40329 KGS

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Kodpfxepqx H Ts Affenf Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Year of construction: 1993, condition: good (used), I sell the angular drilling machine with hinges inserting suitable for doors production MARZANI MACCHINE CHEAP WORK Year: 1993 Number of drilling spindles 1 (drilling head tiltable fully -7 up to +90°) Number of inserting heads 1 (magazine suitable for door hinges) Inserting mechanically, screw system. Kodpfxjhw Dfve Affjnf Very good condition. Available immediately

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Kjdpfsxuf Uajx Affsnf Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

Condition: excellent (used), Year of construction: 2012, Information will follow… Knedextfu Repfx Affef

Condition: excellent (used), DETEL M9 Pneumatic Drilling Machine Pneumatic feed of the unit Adjustable drilling depth Pneumatic material clamping Kodpfexnzxbjx Affjnf Capable of vertical and horizontal operation Head with 9 spindles Spindle pitch: 32 mm Spindle motor: 1.1 kW

Condition: used, 10 meter deep hole boring machine Kramatorsk KJ1910 10-meter boring depth - Heavy duty: 25-ton workpiece foratrice per fori profondi Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy) Knodpfx Ashcxvxsffef

Condition: ready for operation (used), Year of construction: 2000, Table length: 530 mm Table width: 230 mm Table height: 800 mm Table fixed Kodpop Dt T Eofx Affonf Drilling length: 200 mm Drilling depth: 150 mm Height adjustment: 200 mm Drill chuck diameter: 0 - 20 mm Drilling speed: 2800 rpm Motor power: 2.2 kW Weight: 160 kg

Year of construction: 2004, condition: good (used), I sell the multiple boring machine SCM TOP 35, Year 2004. Number of spindles 35 Offset 32mm 6 positions for pre-set drilling depths 2 Aluminium fences 2 x 1500mm Knedpfoiu Urpsx Affsf 4 stoppers for Aluminium fences 4 material pressures pneumatic 2 electromotors 2 x 2,2KW Tilting 0-90° full servomotorical Two-step drilling with pneumatic active piston / max. Drilling depth140mm ! Max. Element width over the drilling head 1280mm. Total weight 693kg. Very good condition. Available immediately.

Condition: used, Morbidelli line boring machine, price Ex Works. Kjdpfx Asxp Hxceffonf

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Knodsxpwf Tjpfx Affof Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Knodpfoxgu R Ijx Affof Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: excellent (used), functionality: fully functional, POINT TO POINT BORING machine with CN model MASTERWOOD SPEEDY 207 Kedpjwd Irvjfx Affjnf second hand machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Condition: good (used), Year of construction: 2001, I sell the multiple boring machine DETTEL M2232 22-spindle x distance 32mm Knodpeq H H Nasfx Affsf Turning head 0-90° screw-quick-change bushes included. Type Vitap. 2 pcs. side fences included Good condition. Available immediately.

Year of construction: 2007, condition: excellent (used), I sell the top multiple boring machine Detel M-13, year 2007. Knedpshua Rpjfx Affof 3-spindle. Motor Perske 2,0kW Very good condition. Available immediately.

Year of construction: 1994, condition: excellent (used), I sell the back side multiple boring machine Detel M1-9, year 1994. 9-spindle x 32mm. Motor 1,1kW Very good condition. Knodpfxjk Iy Hbo Affef Available immediately.

Condition: good (used), Year of construction: 2015, I sell the multiple boring machine Detel M-21, year 2015. Available immediately. Kodjtmwnijpfx Affjnf

Condition: excellent (used), Year of construction: 2011, I sell the universal top multiple boring machine with milling for repair works Plug Repair RILESA Rep.-Borem., year 2011. 4 Top drilling spindles 1 Grooving moulding head Knjdpou N T Skofx Affof Very good condition. Available immediately.