Used High Speed Punching Machine for sale (110,843)

Condition: used, Pneumatic Single-Column Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Air-Powered Press Serial No. 3437 Year of manufacture: approx. 1990 Press force: 3.0 tons at 6 bar Press force: 2.6 tons at 5 bar Press force: 2.2 tons at 4 bar Press force: 1.6 tons at 3 bar Press force: 1.0 ton at 2 bar Gedpfx Ajw A Srwofiskc Throat depth: 150 mm Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Ram surface: Ø 100 mm Tool mount: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical power amplifier (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Required space (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit

Condition: used, Year of construction: 1989, machine/vehicle number: 4588/23, Press capacity: 60 ton Ram stroke adjustable: 20 - 76 mm Slide adjustment: 80 mm Free frontal opening L-R: 650 mm Free lateral opening F-B: 260 mm Table surface area : 770 x 620 mm Slide area: 700 x 456 mm Hole in table: 600 x 250 mm Gkedpfjxch D Tjx Afisc Bruderer Double Roll Precision Feed: BBV 202/120 Number of strokes: 70 -700 s.p.m. Dimensions L x W x H: 2.600 x 2.100 x 2.220 mm Weight of machine approx.: 7,5 ton Standard configuration clutch is overhauled Automation Bruderer feeder BBV 202/120

Condition: used, sheet width 750 mm plate length 1250 mm plate thickness 4 mm table surface area 1600 x 1050 mm no. of strokes 180 Hub/min max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools Godpfx Afoxfb Hmsijkc

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg Gkedpfx Ajdkx Anefiec - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: excellent (used), Year of construction: 2007, operating hours: 46,500 h, functionality: fully functional, sheet thickness steel (max.): 6 mm, table width: 2,050 mm, table length: 1,250 mm, Very good condition. I am selling beacause of buying new one. Maszyna do dyspozycji od grudnia 2025. Godpfjwf Aywsx Afiokc

Condition: good (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4488, control type: manual, degree of automation: manual, actuation type: manual, punching force: 55 t, stroke rate (max.): 38 1/min, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg Gjdpjxd U Nfjfx Afiekc

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 47030312, overall weight: 1,200 kg, air pressure: 6 bar, Carton erector by TMG, type FORMPAQ, model Formec 4 Speed - c - dx, serial number 4.703.03.12, year of manufacture 2012, power 2.6 kW / 7.7A, required system air pressure 6/7 bar, product dimensions (LxWxH) in mm (min.) 345x330x115 / (max.) 750x610x400. Gksdpfxew Rz Szj Afijc Delivery available on request!

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Godpfx Afsvygxneijkc Temperature: approx. 60°C with tools over: ø 12 mm With 14 collets Clamping range 2 - 15 mm

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2020 mm Measurements depth 2800 mm Measurements height 2450 mm Machine weight 7200 kg Control Unit Brand HEIDENHAIN Model iTNC 640 HSCI Main Drive Spindle speed range 1–42000 Gedpfx Ajxcb Ncjfiskc Tool taper Fisher HSK E40 Number of axis 5 Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 400 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 400 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 500 kg Table Number of tslots 5 Table load 250 kg Tools Max tool diameter 16 mm Additional Equipment 4/5-axis Tilting Rotary Table prepared for Pallet System B-axis Tilting Range: −120° to +60° C-axis Rotation: 360° B-axis Speed: 25 rpm C-axis Speed: 20 rpm Keller Dust Extraction System EROWA UPC Production Chuck Clamping System Tool Length and Diameter Laser Measurement, Broken Tool Detection Touch Probe (Renishaw) Precision Pack III – 5-axis Thermal Compensation This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2002, machine/vehicle number: 6428 104 014, Offer 25258 Technical data: - Cutting range at 90° round: 400 mm - Cutting range at 90° flat: W 400 x H 400 mm - Shortest cut-off length: 6 mm - Smallest diameter to be sawn: 10 mm - Minimum remnant length for single cut: 15 mm - Minimum remnant length in automatic mode: 80 mm - Material feed length, single stroke: 750 mm - Material feed length, multiple strokes: 20,000 mm - Saw band dimensions: 5700 x 41 x 1.3 mm - Cutting speed, stepless: 20 - 110 m/min Gkedpjxc Hinofx Afijc - Hydraulic lifting/lowering of saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 8.0 kW - Bundle clamping device - Coolant system - Chip conveyor - Required space approx.: W 3000 x H 2200 x D 2300 mm - Weight approx.: 2,800 kg

Condition: new, Technical data: Gksdpjpxmlqsfx Afisc Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: good (used), Year of construction: 2005, machine/vehicle number: 34704, Offer 25236 Technical specifications: Gsdowyb Rdepfx Afiskc - Drilling capacity in steel ST 60: 34 mm - Maximum drilling capacity in steel ST 60: 40 mm - Drill spindle taper: MT 4 - Drill spindle travel: 160 mm - Throat depth: 330 mm - Table with 2 T-slots: 610 x 430 mm - Max. distance table – drill spindle approx.: 665 mm - 4 feed rates: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Infinitely variable spindle speeds: 70 - 1800 rpm - Work light - RÖHM machine vice - Various HSS drills, countersinks, reducing sleeves - Thread cutting device - Drive: 400 V / 0.6 / 1.8 kW - Space requirement approx.: W 1000 x H 2050 x D 1150 mm - Weight approx.: 470 kg

Condition: used, Henninger high-speed milling spindle SK 40 Type 801 H580 Ratio: 1:6 Godpfx Afsvygzisiskc Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm without collets

Year of construction: 1998, condition: good (used), machine/vehicle number: 3862-8063-564, Offer 23036 Technical data: - Drilling capacity into solid steel ST 60 32 mm - drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drilling spindle holder MK 4 - quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min / max distance spindle - table 310 / 610 mm - drilling radius min / max 400 / 1200 mm - table height 720 mm - table size 1200 x 500 mm - drive 400 V / 1,6 / 2,9 kW - space requirement approx. W 1200 x H 2800 x D 2300 mm - weight approx. 1500 kg Gkedpfx Askzg T Rsfiec - with: - thread cutting device - hydr. columns + jib clamp - coolant device - T - grooves vertical at the rear side of the machine

Condition: good (used), Year of construction: 1984, machine/vehicle number: 332, Offer 24130 Technical data: Gkodpfx Afetxzrwoioc - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine

Condition: good (used), Year of construction: 1965, machine/vehicle number: 1318, Offer 24479 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Drill spindle mount MK 5 - Drill spindle stroke 240 mm - Throat depth 385 mm - Table with 2 T-slots 610 mm - Max. distance table - drill spindle approx. 820 mm - Max. distance base plate - drill spindle 1325 mm - Column diameter 220 mm - Feed rates 0.10 - 0.14 - 0.20 - 0.28 - 0.40 mm/rev - Drill spindle speeds continuously adjustable 85 - 1620 rpm - Drive 380 V / 4 kW - Lighting - Electric foot switch - Space requirement approx. W 750 x H 2350 x D 1500 mm Gkjdpfx Afev Avf Nsioc - Weight approx. 1350 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Gsdpfju At Thox Afiskc Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm Gkjdpfxou H Acyo Afioc - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 2083-949, Offer 24470 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling capacity in steel ST 60: 35 mm - Thread cutting device - Drill spindle taper: MT 4 - Drill spindle stroke: 160 mm - 8 spindle speeds: 75 – 2100 rpm - 3 feed rates: 0.1 / 0.2 / 0.3 mm/rev - Throat depth: 280 mm - Max. distance table to drill spindle: 750 mm - Max. distance machined base plate to drill spindle: 1210 mm - Table with 2 T-slots: 420 x 400 mm - Height adjustable via rack and pinion with hand crank - Table tilts left and right Gsdpfxsw Ad E Ao Afijkc - Drive: 400 V / 0.7 / 1.3 kW - Required space approx.: W 600 x H 2300 x D 950 mm - Weight approx.: 320 kg - Including: thread cutting device, coolant system - Keyless drill chuck 1-13 mm - Lighting

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm Gjdpfx Afskt Nqqjiokc - Weight approx. 700 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 152279, Offer 25253 Technical specifications: - Tapping capacity up to M 20 - Drilling capacity in steel 30 mm - Drill spindle taper MK 3 - Drilling depth 120 mm - 10 spindle speeds 120 - 2160 rpm Gkjdpfx Afoxc Uz Eoiec - Drive 400 V / 0.7 / 1.3 kW - Table size 390 x 420 mm - Distance spindle/table approx. 220 - 600 mm - Spindle arm reach/column 260 mm - Table stand - Required space approx. W 550 x H 1900 x D 800 mm - Weight approx. 300 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm Gksdpet Etiyofx Afijc - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 Gedsu Et Nbopfx Afiokc - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm Gjdowmnhpopfx Afiskc - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 1994, machine/vehicle number: 133120, Offer 24506 Technical data: - Drilling capacity in solid steel ST 60 35 mm - Drilling capacity GG 25 42 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 36 - Drill spindle mount MK 4 - Quill stroke 170 mm - Drill spindle speeds stepless 20 - 3200 rpm - Drill feeds stepless 0.02 - 0.70 mm/rev - Drilling radius approx. min. / max. 490 / 1240 mm - Swivel angle 330° - Table size 1200 x 620 mm - Table height 900 mm - Motorized height adjustment / drill column stroke 450 mm - Hydraulic column + jib clamping - T-slots vertical on the left machine side - Coolant device Gkedpfx Afjwndydoiec - Drive 400 V / 5.0 kW - Space required approx. W 1500 x H 2600 x D 1700 - 2500 mm - Weight approx. 2100 kg