Used High Speed Punching Machine for sale (102,430)

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t pressure 30 t volt 380 V Nwjdspxri Hspfx Adhsp frequency 50 Hz

Condition: good (used), Year of construction: 1991, machine/vehicle number: 4073756691005, Offer 25360 Technical Data: - Sheet and flat bar shear, blade length: 175 mm - Cuts flat steel up to 100 x 15 mm or up to 150 x 10 mm - Profile and bar shear: - Cuts angle steel up to 80 x 8 mm - Cuts round steel up to 32 mm - Cuts square steel up to 30 mm - Punching station: - Punching force: 360 kN - Stroke: 10 to 32 mm - Throat depth: 155 mm - Punches steel up to 20 mm Ø in 14 mm - Or up to 27 mm Ø in 10 mm - Drive: 400 V / 3 kW Njdpfx Aoxupvbedhswp - Foot pedal - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg - Various punch and die sets included

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 47030312, overall weight: 1,200 kg, air pressure: 6 bar, Carton erector by TMG, type FORMPAQ, model Formec 4 Speed - c - dx, serial number 4.703.03.12, year of manufacture 2012, power 2.6 kW / 7.7A, required system air pressure 6/7 bar, product dimensions (LxWxH) in mm (min.) 345x330x115 / (max.) 750x610x400. Nedpew Rz Szjfx Adhowp Delivery available on request!

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm Nwedponygvrefx Adhsp 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 5710 mm Nodpfjxqtfxsx Adhewp Measurements depth 6370 mm Measurements height 2220 mm Machine weight 14000 kg Control Unit Brand BOSCH Model MTX Main Drive Number of axis 6 Turret Number of turrets 1 Tools Number of station 12 Media Oil tank 300 liters Additional Equipment Hydraulic Motor Power: 11 kW Axes Drive Type (C1 and C2): Direct drive Hydraulic Punching Force: 30 tons Portable CNC Control Panel Work Chute: Automatic system to take out cut parts Mobile Storage Box for Cut Parts Waste Box Light Barriers This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2001, condition: used, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Njdpfxswirkgs Adhswp Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze Nsdpfx Ajndz Npjdhowp pressure 50 t

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm Nwedpfxoxqg T Ns Adhep 1x 2-fold tool - diameter 93.80x120.90mm

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Nwsdjwzyg Hopfx Adhsp

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Nwsdpfx Asxp R E Todhsp Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm Nsdpfxewc U Nlj Adhswp ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Nodpfx Adom Ncayshewp Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm Nsdpfx Adsvuugcohowp column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Year of construction: 2011, operating hours: 14,272 h, condition: excellent (used), Punching machine AMADA EM2510NT was manufactured in 2011 in France in the factory AMADA. In 2012 started used in Spain. In 2020 started used in Lithuania. And for now is for sale with 14 272 operating hours. This machine can be operate with a punching force of 200 kN. The Punching machine still is in good condition and serviced on time by Amada support company. Included full documentation of inspections. The turret punch is in exelent condition. The machine comes with the software. The Punching machine is still connected and it is possible to test anytime in Vilnius, Lithuania. Please see all photos and video. Specification: Year: 2011 Nwsdpjlxy Efefx Adhjp Made in: France Operating time in hours: 14 272 Power on hours: 29 580 Software: icluded Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: No tools Metal length: 2 500 mm. Metal width: 1270 mm. Sheet thickness: 3.2 mm. Metal width repositioning: 5 000 mm. Weight of the workpiece: 150 kg. Dimmensions: L 6080 x W 5120 x H2318 mm Weight: 16 500 kg Location: Vilnius, Lithuania Possible to test: Yes Any questions welcome.

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Nwedevuucwopfx Adhjp

Condition: used, Year of construction: 1996, pressure 130 t distance between columns 1220/1070 mm stroke 22 - 96 mm no. of strokes 20 - 120 Hub/min dayligth (stroke and adjustment up) 518 mm Nsdpfxsvuubyo Adhewp column travel -side 600 mm table surface area 1220 x 880 mm hole in the table 450 x 250 mm table height over floor 950 mm ram surface 1180 x 800 mm power requirement 22,0 kW weight of the machine ca. 17,50 t required space 3,7 x 1,75 x 3,55 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm Nedsvuua Nspfx Adhowp hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Njdpfx Adovut Uxjhjwp Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1978, pressure 150 t stroke fix 80 mm no. of strokes 30 - 150 /min distance between columns 930 mm dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 880x1300 / 1500x600 mm hole in the table 760 x 180 mm Njdpfxevut Urj Adhswp table height over floor 1270 mm ram surface 920x1000 / 1300x600 mm Weight 27,5 t dimensions of the machine ca. 3,1 x 1,8 x 4,3 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, centralized lubrication, WITHOUT feeder as is where is, WITHOUT putting into operation Price for commissioning (with new electric control) on request

Condition: used, Year of construction: 1988, pressure 200 t stroke 30 - 160 mm no. of strokes 40 - 120 /min distance between columns 1500 / 1300 mm dayligth (stroke and adjustment up) 860 mm column travel -side 600 x 530 mm table surface area 1250 x 1250 mm hole in the table 550 x 300 mm table height over floor 1000 mm ram surface 1250 x 1000 mm ram adjustment 125 mm material width 30 - 500 mm material thickness 0,5 - 3,0 mm Nodpovut S Dsfx Adhjwp feed length 0 - 999,9 mm power requirement 50,0 kW Weight 34,00 t dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment

Condition: used, Year of construction: 1983, pressure 160 t stroke fix 160 mm no. of strokes 30 - 120 /min distance between columns 1190 mm dayligth (stroke and adjustment up) 735 mm column travel -side 600 mm table surface area 1200 x 1000 mm hole in the table 500 x 300 mm table height over floor 900 mm ram surface 1000 x 800 mm ram adjustment 125 mm material width 550 mm material thickness 0 - 6,0 mm Nwjdpsvuk E Uefx Adhep material cross-cut 1100 mm² feed length 350 mm power requirement 45,0 kW Weight 25,0 t dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, ram interlocking, centralized lubrication, mechanical pincer feed (Haulick, RS 350/550 SL 90) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1986, pressure 160 t stroke 20 - 120 mm no. of strokes 20 - 120 /min distance between columns 1300 mm column travel -side 520 mm Nwedovut Rtspfx Adhsp dayligth 570 mm table surface area 1250 x 900 mm hole in the table 900 x 250 mm table height over floor 1000 mm ram surface 1100 x 700 mm ram adjustment 100 mm material width 20 - 320 mm material thickness 0,3 - 4,0 mm feed length 1,0 - 9999,99 mm power requirement 18,5 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 3,0 x 2,3 x 3,7 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric centralized circular lubrication electronic roll feed make Kaiser type KWV 320 Z, yom 2000 with hydraulic intermediate lifting of the rolls

Condition: used, Year of construction: 1996, pressure 63 t distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm table height over floor 1150 mm Nsdpfx Adevut Rgshewp ram surface 960 x 460 mm power requirement 32,5 kW weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm Nwjdpovut Ixsfx Adhop dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Year of construction: 1990, pressure 50 t distance between columns 800 mm stroke 4 - 60 mm no. of strokes 30 - 300 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 350 mm table surface area 780 x 640 mm hole in the table 690 x 140 mm table height over floor 1150 mm ram surface 800 x 460 mm power requirement 26,0 kW weight of the machine ca. 9,00 t Nwodpfxsvut Huj Adhsp required space 2,4 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, automatic stroke adjustment electronic roll feed (PBK, WV 65-DSM 300P, yom. 2007) can be offered without or with putting into operation in given condition - video at seller's site before dismantling available