Milling machine / HSC (High-Speed Cutting)

Digma HSC 500

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Blodsy Iwlaepfx Amren Machine is immediately available!

Condition: ready for operation (used), Hello, we offer used Erowa Powerchuck with pallets. They have been cleaned and checked by us. In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Individual purchase also possible. Wide range of pallets available. Bodpfx Amsiq Iy Iersln Do you have any questions? Then we are at your disposal. Shipping is possible.

Condition: used, Year of construction: 2018, Vibratory conveyor from Wolfgang Hörmle For sale in different versions and in good condition. SRC-N 200 left SRC-N 200 right SRC-N 250 left SRC-N 250 right HFS 168 control unit Bledet Ect Ijpfx Amren

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands Bljdpfx Asyg Eu Somren 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Bjdpeygib Nefx Amroln Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340

Condition: excellent (used), Year of construction: 2003, Demag Ergotic system Bedpfsr Avfnox Amreln Closing 35 tons Year of manufacture 2003

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Bodpfx Aox Eirqsmrjln Screw diameter: 18 mm

Year of construction: 2004, condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Bledszybu Hspfx Amron

Condition: ready for operation (used), Year of construction: 2001, operating hours: 11,472 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: System 16iM, spindle speed (max.): 30,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details. • Electrical • Operating voltage: 400 V Blsdpfx Amoyvq Drersn • Frequency: 50 Hz • Phases: 3-phase • Nominal current: 90 A • Recommended supply fuse: 100 A (slow-blow/time delay) • Supply cable size: 35 mm² copper • Wiring diagram: 4036 EP 0024 • CNC / Control • Microcomputer control: Professional A • CNC: FANUC System 16iM • DNC connection: Data server interface • Integrated IC memory: 160 MB • Interpolation: NURBS • Programs: 125 main and sub-programs storable simultaneously • Coordinate input: Polar coordinate input available • High-speed contour control: Super-GI • Processor: RISC for fast 3D machining calculations • Mechanical construction • Machine frame: Cast iron welded construction • Axes layout: Cross table system (X, Y); Z-axis console type • Guides: Preloaded ball linear guideways • Thermal stability: Oil circulation cooling for spindle temperature stabilization • Axis performance • Rapid traverse: up to 16,000 mm/min • Simultaneous machining: 3-axis contour milling • Contour accuracy: High (Super-GI control) • Spindle • Tool holder: HSK-A63F • Torque: 21 Nm • Front bearing diameter: 55 mm • Tool system • Tool magazine capacity: 15 tools • Tool breakage monitoring: Yes • Automatic tool changing: Yes • Applications / capabilities • Graphite electrode milling (incl. long tools) • Copper electrode machining • Hardened steel milling • Designed for automatic production sequences • Optimized surface finish capability • Contour-accurate 3D milling capability • Standard/integrated systems • Graphite dust extraction system • Dust removal via: air blast, spindle suction, tool suction • Filter system with automatic collection container • Minimum quantity lubrication (MQL) • Designed for high-speed graphite machining • Suitable for hardened mold cores

Condition: used, ROSA LINEA IRON 11.6 is a CNC surface grinder engineered for precision, high accuracy and reliable performance. Capacities: table 1100×500 mm; travels X 1350 mm, Z 650 mm; table load max 1100 kg; grinding length 1200 mm; width 650 mm; wheel Ø400×100 mm, bore 127 mm. Specs: wheel speed fixed 1500 t/min; table speed 1–40 m/min; automatic cross feed stepless 1–3 m/min; voltage 3x400 V 50 Hz; machine weight ≈6400 kg; dimensions 5500×2490×2600 mm. Accessories: coolant system, paper filtration, magnetic plate 1100×500 mm, grinding wheel with flange. Delivers tight tolerances; suited to automotive, aerospace, toolmaking, medical and watchmaking. Bledpfjzqbhzsx Amrsn