Used Hh Fuse for sale (1,156)

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm Nodpfx Ahsx Icyvs Howb -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,564 h, load capacity: 1,200 kg, lifting height: 6,500 mm, free lift: 2,140 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Load center: 600 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished without warranty Nsdpfjw N Trksx Ah Hswb Technical condition: very good Front tire type: Vulkollan Front tire condition: 80 - 100% Rear tire type: Vulkollan Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 620Ah Battery manufacturer: overhauled and tested battery Battery type: PzS Battery year: 2019 Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Sideshift Mast traverse Safety light, beacon light Lift height display, 360° steering

Condition: used, mileage: 446,764 km, power: 294 kW (399.73 HP), first registration: 02/2019, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, disability-friendly, = Additional Options and Accessories = - DVD - Retarder - Wheelchair lift - USB connections - USB connections - Webasto heater = Further Information = Nwodpfx Ahexwwize Hjb Damage: none = Company Information = We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for buying and selling used buses and features an extensive lot that serves as our showroom. We always keep a wide range of buses from all brands, capacities, models, and price categories in stock. We can help you find the right coach, school bus, or city bus tailored to your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing hours for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish and more.

Year of construction: 1989, condition: excellent (used), Vollmer CHHF 21 H – machine for single-sided grinding year 1989 S/N 907 Manufacture Vollmer Germany in good working condition Technical data of the CHHF 21H at a glance: Circular saw blades Outside diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle to 30 ° Radial clearance angle -7° to +3 ° Tangential clearance angle to 5 ° Connected load appr. 0.52 kW Weight appr. 85 kg Dimensions 70 x 50 x 80 cm This machine was designed especially for the repair of missing carbide teeth. Newly inserted tips are ground in alignment with the existing teeth. Nwsdpfx Ajixt Hhoh Hob With this table-top version, VOLLMER is offering a particularly economical,space-saving solution. The CHHF 21 H uses the wet grinding technique. During the grinding process,the grinding unit is moved manually over the tooth, flanks, the saw blade being positioned by hand against a fixed stop. The next tooth and then all the remaining teeth can be ground until the required tooth flank dimension is achieved.

Condition: used, machine/vehicle number: YB1E4A111HB41xxxx, mileage: 197,000 km, Year of construction: 1987, Please contact ATS Norway for more information Please provide reference number upon request: 20551 Specifications: Model year: 1987 Mileage: approx. 197,000 km Transmission: Manual Crane: HMF 453-K2 Crane reach: approx. 6 meters Air horn Tires (see photos) Dimensions: Length: 713 cm Width: 250 cm Curb weight: 4,720 kg Engine power: 90 hp Description:Volvo FL4 flatbed truck with HMF crane, sold as a repair project. Significant repairs should be expected. The truck was deregistered in 2017 and has been standing still since then. The crane was functional when parked, but has not been tested recently. Njdpfxowph Eas Ah Hjwb There is a crack in the chassis.Sold as-is. Ready for delivery. Km: 197000 HK: 90 Technical approved: no EU-approved until: 28.02.2018 Own weight: 4720 Total Weight: 7490 Payload: 2695 Width: 250 Length: 713 Model: FL4 Gearbox: Manual

Condition: used, machine/vehicle number: YV2XZ22C8HA80xxxx, mileage: 403,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 21704 Specifications: Km: Approx. 403,000 Gearbox: Automatic Full air suspension 6x2 with steering on 3rd axle Engine brake Decent tires On-Spot Euro 6, 419 hp JOAB body 2 chambers Approx. 4 m³ for bio and 16.7 m³ rear Winch Bale clamp Reversing camera Botek scale and printer Radio/CD Climate/AC Service history from Volvo Ready for delivery Description:Volvo FM410 Refuse Truck from 2017.JOAB body with 2 chambers.Service history from Volvo.Ready for delivery. Km: 403000 HK: 418 Technical approved: no EU-approved until: 30.11.2025 Nwodsxt Dglspfx Ah Heb Own weight: 16800 Total Weight: 27000 Payload: 10125 Width: 255 Length: 980 Euro: 6 Model: FM410 2-Kammers Renovasjonsbil Gearbox: Automatic

Condition: used, machine/vehicle number: YS2P6X2000211xxxx, mileage: 270,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21968 Specifications: - Eu-approved until 24.09.2026 - Km: Approx. 270,000 - Transmission: Automatic - Full air suspension - Swing on 3 - Tires (see pictures) - 6x2 - NTM Body, 21.7 m3 - 1 chamber - Crane - Remote control - LPG truck - Euro 6, 344 hp - Botek Printer - Weight - Rear view camera - Radio/CD - Air conditioning/AC - Gold agreement with Scania - Ready for delivery Description: Good used Scania Renovation truck from 2015. The car runs on LPG and is equipped with a crane. Weight doesnt work, unknown reason.  1 chamber NTM body. It is Eu-approved and has a gold agreement with Scania. Ready for delivery. Km: 270000 Nsdpfx Ahjx A R Tdo Hewb HK: 344 Technical approved: Yes EU-approved until: 24.09.2026 Own weight: 17100 Total Weight: 27000 Payload: 9825 Width: 255 Length: 920 Euro: 6 Model: P340

Condition: used, machine/vehicle number: YS2R6X2000537xxxx, mileage: 860,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21746 Nwodexvlbpepfx Ah Hjb Specifications: EU-approved until 31.03.2026 Model year: 2015 Mileage: approx. 860,000 km Full air suspension Hydraulics, 140 L tank Euro 6 Length: 678 cm Width: 255 cm Wheelbase: 310/132 cm Curb weight: 9540 kg Drive: 6x2 Power: 581 hp Dual pedal sets Roof-mounted spotlights 2x rotating beacons Sleeper bed Coffee maker Radio/CD Air conditioning Remarks: Right-side step is damaged Cylinder head gasket needs replacement Km: 860000 HK: 580 Technical approved: Yes EU-approved until: 31.03.2026 Own weight: 9540 Total Weight: 28000 Payload: 18460 Width: 255 Length: 678 Euro: 6 Model: R580 6x2 Trekkvogn m/ hydraulikk

Condition: used, machine/vehicle number: YV2ASW0C37A63xxxx, mileage: 649,411 km, Year of construction: 2007, Please contact ATS Norway for more information Please provide reference number upon request: 21161 Specifications: 2007 model 649,411 km (will increase) I-Shift 480 hp Nwedpfjw R Nl Njx Ah Hjb 6x2 Lift on 3rd axle Euro 4 engine Tires (see pictures) 20-ton hooklift Hooklift with kink Toolbox Hydraulic underrun protection Trailer hitch Climate/AC Radio Lights Ready for delivery Description:We have a 2007 Volvo FH hooklift truck with kink for sale.According to the owner, the truck works as it should and is EU-approved until 12.06.2026.Defects and signs of wear may be present due to the age of the vehicle.Ready for delivery. Km: 649411 HK: 480 Technical approved: Yes EU-approved until: 12.06.2026 Own weight: 12680 Total Weight: 28000 Payload: 15245 Width: 255 Length: 862 Euro: 4 Model: FH Krokbil m/ knekk SE VIDEO

Condition: refurbished (used), Year of construction: 2009, operating hours: 6,246 h, load capacity: 1,200 kg, lifting height: 2,900 mm, fuel type: electric, construction height: 1,900 mm, Friedmann Forklifts – Remade for Action Used industrial trucks from selected premium manufacturers, fully serviced, tested, and refurbished by us in accordance with FEM-4.004 (UVV) standards. Nodpswzuurofx Ah Hjwb Custom modifications of any type available upon customer request.

Condition: new, sheet thickness: 8bending length: 3100upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered Nwjdpfx Ahsd Ab Sae Hob - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 7.070,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, mileage: 318,426 km, first registration: 03/2021, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, had accident, MAN TG3 TGS 18.510 - 4x4 Hydrodrive - Accident vehicle - Hydraulic system - Navigation - Refrigerator Errors and prior sale excepted. Internal vehicle number: 11553 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Njdsxyn I Hspfx Ah Hewb WhatsApp WhatsApp

Condition: new, Year of construction: 2022, power: 35 kW (47.59 HP), Equipment: ABS, all wheel drive, * All-wheel drive * Hydraulic system Njdpfxewuzbre Ah Howb * PTO (power take-off) * Trailer hitch * Foldable rollover protection bar ----* Front tyre size: 27x10.50-15 * Rear tyre size: 12.5-20 * Wheelbase: 1750 mm * Unladen weight: 1490 kg ----Vehicle number: 7334 -----Errors and prior sale excepted WhatsApp support available! If you have questions about the vehicle or need further information, feel free to write us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, Year of construction: 2011, operating hours: 382 h, load capacity: 1,250 kg, lifting height: 3,350 mm, fuel type: electric, construction height: 1,700 mm, gearing type: automatic, Toyota SPE 125L high-lift stacker, year of manufacture: 2011, operating hours: only 382!, previous owner: Bundeswehr (German Armed Forces), rated load capacity: 1,250 kg, lift height: 3,350 mm, triplex mast, battery: 14/2022, including charger, overall height: 1,700 mm, in good condition, immediately ready for use! Nwjdpfx Ajxmmnloh Hjb On request, we can provide a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For further information, please visit our website. Subject to errors and prior sale!

Condition: good (used), Year of construction: 1996, machine/vehicle number: 490, Schmedt PräLeg HHS18 hanging machine, built in 1996, machine number 490, in good condition, available immediately If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment. Nwedpsvt Sadjfx Ah Hob

Year of construction: 2020, condition: excellent (used), overall weight: 255 kg, conveying length: 1,300 mm, transport width: 450 mm, transport height: 950 mm, Plate heat exchanger by VAHTERUS, model PSHE 3HH-242/1/1, insulated. Year 2020. Connections: Lateral DN50, DN65. Top DN150. Bottom DN50. Nwodpfx Ajxnypfsh Hjb

Condition: used, mileage: 763,000 km, power: 338 kW (459.55 HP), first registration: 03/2017, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: soot filter, - Retarder - Air conditioning - GHH compressor 3 bar - Excellent condition Suspension: leaf-air Nsdpfsx Uvz Hex Ah Hjwb

Condition: used, Tapered roller bearings -Condition: New -Manufacturer: Timken, tapered roller bearing type HH421246 C -Bore: Ø 98.42 mm -Dimensions: Ø 170 x 65 mm Nodsrfzttopfx Ah Hjwb -Weight: 4.9kg

Condition: good (used), Hose reel, hose unwinder, tank hose reel, wall reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, grease hose reel, grease hose reel -Manufacturer: Consul, grease hose reel -Type: M 095 Nwodpfx Ahjwbpn Hs Hjb -Hose length: 8 m -Dimensions: 780/270/H550 mm -Weight: 29.2 kg

Condition: good (used), Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Ruhr gearbox, geared motor type SN9BFH 40:1 -Power: 0.37 kW Nwedpeqa I Hrefx Ah Hjb -Speed: 35 rpm -Protection rating: IP55 -Engine: Type H7 1B/4 -Power: 0.37 kW / 1390 rpm -Hollow shaft: Ø 19 x 90 mm -Dimensions: 330/180/H155 mm -Weight: 8.8 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hydraulik Griessen, double-acting hydraulic cylinder stroke 150 mm -Type: HN3-GHI 80/55-150 DH Nwedpfx Aev N E Igoh Hob -Piston rod: Ø 55 mm / M34 -Hole: Ø 40 mm -Dimensions: Ø 128 x 545 mm -Weight: 24.4 kg

Year of construction: 2003, condition: good (used), hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader -Manufacturer: Lancier, basic unit hydraulic shear / spreader -Type: HHC 230-F -Nominal pressure: 720 bar -Dimensions: 1050/260 / H210 mm -Weight: 13.4 kg Nwodpehcgiyofx Ah Hsb

Condition: used, Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Fette, shell end mill with longitudinal groove -Type: Fette 50 x 25 H Sp 588 Nwsdpfsh Tk Dhsx Ah Hsb -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 50 x 25 x 22 mm -Weight: 0.2 kg

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor Nwsdpfx Ahjqbycfo Hsb -Manufacturer: Ruhr gearbox, geared motor type SN9BFH 40:1 -Power: 0.37 kW -Speed: 35 rpm -Protection rating: IP55 -Engine: Type H7 1B/4 -Power: 0.37 kW / 1390 rpm -Shaft: Ø 20 x 65 mm -Dimensions: 330/220/H155 mm -Weight: 9.2 kg

Condition: used, Hydraulic pump, oil pump, gear pump -Max.: 600 rpm Nwsdpsdpyzlofx Ah Hob -Working pressure: 2 bar -Output: 3 l/min -Number: 1x pumps available -Price: per piece -Dimensions: 95/100/H90 mm -Weight: 2.3 kg