Used Hh Fuse for sale (2,027)

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,138 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: + - 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tire size front / rear wheel: 18.00 - 25 Axle load front / rear axle loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Drive motor: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permissible cross slope: 15% Max. permissible gradient: 28% Knsdpfx Ajvrd Epjfijc Turning circle outside / inside: 6,713 / 3547 mm Bucket capacity (SAE, piled): 5.4 m³ Maximum speed loaded forward / backward on flat ground: 25.0 km/h Exhaust system: Silencer / catalytic converter Main dimensions: 9,715 x 2,600 x 2450 mm (LxWxH) Front / rear axle load unloaded: 13,100 / 16,900 kg Own weight: 30,000 kg Payload: 11,000 kg

Condition: used, Electric chain hoist, electric lifting device, crane MAN GHH type SKA 83.12 Year of manufacture: approx. 1997 Load capacity: 125 kg Hook path: 8.2 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min 1 load chain Knodpfx Afsxcit Asioc Power supply: 380 Volt, 50Hz

Condition: new, 2 cables with connectors for hhs V5 glue valve, 3 meters long, order number 77256300 Knedpfxjxclq Rj Afisc

Condition: good (used), Schmedt PraForm HHS 2100 Book Press with joint forming Book press with groove burner. Machine in perfect condition, purchased from the national library. Practically unused. Produced by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Kodowud Tdopfx Afionc Weight 250 kg Power supply 380 V + compressed air.

Year of construction: 2006, condition: ready for operation (used), HHS glue application unit X Trend XT E 04, 4-channel, year of manufacture 2006, with 1 glue head (cold glue), glue tank, rotary encoder, and photoelectric sensor. Knsdpfswvmqnsx Afisc

Condition: used, Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Juchheim, temperature controller type HROt-48/k,ap,os Ksdpfx Aem Ui Izsfisnc -Temperature range: 0 to 1200 °C -Dimensions cardboard: 195/105/H120 mm -Weight: 0.5 kg

Condition: used, Year of construction: 2018, length in total 3000 mm band width 200 mm conveying height 1900 total power requirement 1 kW Kjdpsv Sdymjfx Afionc weight of the machine ca. 1 t dimensions of the machine ca. 3x1x2 m

Condition: used, Year of construction: 2011, Vakuum Liftsystem for 25 kg bags Schmalz Jumbo Sprint Kodpfx Asu H D Uqjfisnc year 2011 price: €4.900 contact: Mr. Rainer Eckerle

Condition: new, New cables with control plug for V4 glue valve (HHS) Cable order number: 77255300 Kjdoxclmrepfx Afijnc Length: 3 meters

Condition: good (used), Schmedt PraLeg HHS 1840 XL Case in machine Machine in perfect condition, purchased from the national library. Practically unused. The machine suspends the book block in a prepared hard cover. Two gluers, smooth adjustment of glue thickness. The machine has full documentation with a CE certificate. Format: Block height: 80 – 440 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Ksdjwud S Topfx Afionc Efficiency approx. 200 – 300 pcs/h Power supply 230V Weight 300 kg

Condition: excellent (used), Screw compressor KSK GHH RAND machine after service on a 120L tank Technical data: capacity 0.45 m3/min (450 L/min); 4 KW engine; pressure. 10 bar compressor fully operational; Kodpfxowc Sipe Afionc net price: 4200 PLN gross price: 5166 PLN

Condition: used, Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: KROt-96/a, re11 -Setting value: from 0 to 1200 °C -220 V 5 A -Price: per piece -Number: 2x available Knjdpfjb A Sv Tox Afisc -Weight: 0.6 kg

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Kedpfemw Ukcex Afisnc Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: ready for operation (used), Complete perforating device HHS with 4 heads uvm Ksdpfxokkwfpo Afionc

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Knedpfx Afjwud Tkeiec Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: used, Process controller, controller, temperature controller, temperature sensor, setting for temperature Ksdpfob A Skcex Afisnc -Type: HROt-48/k, ap -Setting value: from 0 to 1200 C NiCr-Ni "K" -5 A, 230 VAC ohmic load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Number: 6x available -Weight: 0.5 kg

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH Ksdpfx Asqgdkiefijnc

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Jungheinrich electric forklift -2x drives -Filter Control valve -Hydraulic tank: 930/400 / H360 mm -Dimensions: 1000/400 / H800 mm -Weight: 288 kg Knodpjb Uht Aofx Afijc

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, setting for temperature Kjdpeb A Skdsfx Afionc -Type: HROt-48/k,ap,os -Setting value: from 0 to 1200 C NiCr-Ni"K" -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Number: 4x available -Weight: 0.5 kg

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg Kjdpfou Icqaex Afisnc dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: used, mileage: 801,000 km, Year of construction: 2006, Serial number: YV2AS50D26A61xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20470 Specifications: EU approved until: 02.06.2025 Model year: 2006 Mileage: Approx. 801,000 km​ Gearbox: I- Shift Tires: See pictures Retarder Length: 675 cm Width: 250 cm Wheelbase: 321/ 137 cm Curb weight : 9,930 kg Drivetrain: 6x4 Engine power: 520 hp 2 beds in driver's cabin Cowcatcher Tool cabinet Extra lights Coffee maker Radio/ CD Air conditioning ( AC) Ksdpfx Ajwphxyefijnc Description:

Condition: new, sheet thickness: 13bending length: 3100upper roll diameter: 300 Technical specifications: Kjdjd Ab R Hjpfx Afisnc - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: good (used), power: 130 kW (176.75 HP), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 10,671 h, Equipment: air conditioning, Technical information Chassis type: articulated Empty weight: 20.500 kg Make of engine: D934S A6 Kedpfx Afexprq Deienc Top speed: 40 km/h Functional Lifting capacity: 12.000 kg Bucket capacity: 7 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: VATZ1287CZB039424 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 90 Tyre brand: Bridgestone Output of the auxiliary hydraulics: 234 l/min Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 8,38x2,7x3,36 Production country: DE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), color: white, overall weight: 16,000 kg, empty load weight: 2,860 kg, loading space width: 2,460 mm, loading space length: 7,700 mm, loading space height: 3,000 mm, GERMAN DEALER offers: Jumbo BDF swap body 7.82m with lifting roof, sliding roof, sliding curtain, lashing rail. 16,000 kg gross weight, 2,860 kg empty weight. Year of manufacture: 2017. Multiple units available. Internal dimensions: 7,700 x 2,460 x 3,000 mm. Many swap bodies and subframes in stock! ##### PLEASE CALL – NO EMAILS! DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Kodpfxsxp R Tqo Afisnc

Condition: like new (used), functionality: fully functional, load capacity: 8,000 kg, total height: 1,200 mm, total length: 2,900 mm, total width: 1,800 mm, type of input current: AC, table width: 1,200 mm, rotary table diameter: 1,200 mm, overall weight: 3,300 kg, height adjustment type: electric, table load: 8,000 kg, pivoting range: 135 °, torque: 8,000 Nm, Welding Positioner NewFiro 8000 HHT A powerful and reliable solution for heavy-duty welding applications. The NewFiro 8000 HHT combines strength, precision, and flexibility making it ideal for rotating and positioning large workpieces with ease and accuracy. Technical Specifications: Load Capacity: 8,000 kg Table Diameter: 1,200 mm Table Height: 1,250–2,050 mm (adjustable) Knedpfx Afjxpxwqoioc Tilting Range: 135° Rotation Torque: 8,000 Nm Tilting Torque: 26,000 Nm Rotation Speed: 0.04–1.2 rpm (variable) Dimensions: Length: 2.9 m Width: 1.8 m Height: 1.2–2.0 m Weight: 3,300 kg Built for performance and durability, the NewFiro 8000 HHT ensures smooth operation and precise contro. The perfect choice for demanding welding and assembly tasks.