Used To H for sale (60,792)

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h Ksdpovhctwofx Ahbedu - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, first registration: 09/1994, Year of construction: 1994, DOLL BOFA Belzig timber trailer with EXTE bolsters ! robust main frame ! • 3 x BPW 8 t - ECO - Plus axles • air suspension • lift axle • ABS • LED work lights at the rear • Overall length: 12,500 mm • Width: 2,500 mm • GVW: 34,000 kg • Unladen weight: 6,400 kg • 8 x extendable EXTE bolsters • Steel / aluminium • Tyres: 385/65 R 22.5 - TÜV / main inspection / safety inspection: new! - German trailer! Errors and prior sale excepted! Kodpfxswmpmgj Ahbsdu

Condition: excellent (used), Year of construction: 2008, Technical data: Kdsdpey D Sb Uefx Ahbeu Working length: 6100 mm Distance between stands: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic TFT screen 14" Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Laser monitoring Motor power: 38.5 kW CE marking Dimensions (length x width x height): approx. 6300 x 2500 x 3600 mm Weight: approx. 36.5 tons Note: Table extends approx. 450 mm into the floor Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition Only 5,500 operating hours In the meantime, we have stored the machine and disassembled the table The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2018, Technical specifications: Kodpfx Ahjwanitebodu Load capacity: 3 tons Clamping plate diameter: 1150 mm Clamping plate rotation angle: 360° Extension arm rotation: 360° Speed: 0.05 - 0.5 rpm Rotary axis height: 1300 mm Thrust: 1200 mm Motor power: 1.1 kW CE mark Dimensions (length x width x height): approx. 2900 x 1150 x 1750 mm Weight: approx. 2.2 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2002, Technical specifications: Retrofit in 2026 Working length: 4100 mm Distance between uprights: 3700 mm Press force: 220 tons CNC control: CD2000 (new) Color screen size: 14" Controlled axes: Y1/Y2; X; R Motorized adjustable back gauge Overhang: 300 mm Stroke: 200 mm Automatic crowning Motor power: 20 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17.5 tons Kodpfjznl U Tox Ahbsdu Accessories: Segmented AMADA tools, new Lateral safety devices Condition: The machine is in very good overall condition Only approx. 7,500 operating hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Fully operational complete line. Electrical documentation included with the machine. Unwinder Specifications: 1. Max. production speed: 250 m/min 2. Max. web width: 520 mm 3. Min. web width: 150 mm 4. Max. roll diameter: 1370 mm 5. Max. roll weight: 800 kg Connections: Power supply: 32A; 400V, N, PE Compressed air: Min. 6 bar (dry) Roll Sheeter Specifications: 1. Fully variable cutting and waste formats. 2. Format changes are made simply by entering new parameters on the control panel, without the need to change knives. 3. Longitudinal slitting length can be changed by entering new parameters on the control panel, without the need to change knives. 4. Longitudinal slitting is possible using knife holders at the module's inlet. 5. Waste extraction possible via extractor (not included in the system). Ksdjpahg Hspfx Ahbedu 6. Max. production speed: 250 m/min 7. Max. web width: 520 mm 8. Min. web width: 150 mm 9. Paper thickness: 36 gsm to 160 gsm 10. Cutting accuracy: +/- 0.2 mm 11. Stepless format adjustment: 4"–25" 12. Stepless cutting width adjustment: 5 mm to 80 mm Connections: Power supply: 32A; 400V, N, PE Compressed air: min. 6 bar (dry) Batcher Stacker Specifications: 1. Min. stack length: 100 mm 2. Max. stack length: 635 mm 3. Min. stack width: 115 mm 4. Max. stack width: 720 mm 5. Min. stack height: 100 sheets 6. Max. stack height: 200 mm 7. Max. production speed: 250 m/min (depending on paper thickness) 8. Can stack up to two sheets at once 9. Paper thickness: 36 gsm to 160 gsm Connections: Power supply: 35A; 400V, N, PE Compressed air: min. 6 bar (dry) Plough Fold Station Connections: Power supply: 50A; 400V, N, PE If you have any questions, please contact us.

Condition: used, functionality: fully functional, Year of construction: 1989, operating hours: 8,775 h, load capacity: 3,000 kg, lifting height: 3,175 mm, fuel type: diesel, mast type: free lift with telescopic boom, gearing type: automatic, empty load weight: 5,380 kg, color: red, Equipment: 3rd hydraulic function, cabin, lighting, pallet forks, Cab with heating (driver's door included), side sliding door (disabled), German-made engine. For sale to commercial businesses only, with no warranty of any kind. Kdsdpfez E R Hyjx Ahbsu Loading possible.

Condition: new, Year of construction: 2026, total height: 2,000 mm, total width: 1,580 mm, total length: 1,600 mm, overall weight: 2,800 kg, rotor diameter: 350 mm, rotor length: 1,600 mm, sieve perforation: 3 mm, number of blades: 18, rotational speed (max.): 400 rpm, warranty duration: 12 months, power: 30 kW (40.79 HP), MIZAR FGR Series - Industrial Fine Granulator for High-Performance Cable Recycling Superior Granulation for Industrial Waste Processing Mizar Recycling Machinery’s FGR Series granulators deliver high-performance results in industrial waste processing and recycling applications. These fine granulators are precision-engineered to efficiently grind and granulate various scrap materials. Featuring superior crushing capacity and fast processing times, the FGR Series effectively handles challenging materials, including copper cables, plastics, and electronic waste. Built with durable materials and wear-resistant blades, the FGR Series ensures long-lasting, reliable performance. Prioritizing energy efficiency, these machines deliver high processing output with low power consumption, significantly reducing your energy costs. KEY ADVANTAGES & FEATURES • High-Performance Crushing: Superior capacity for fast and effective granulation of scrap materials. • Industrial Durability: Constructed with wear-resistant components and high-grade blades for extended service life. • Energy Efficiency: Optimized design provides maximum throughput with minimal energy consumption. • Safety-First Design: Integrated emergency stop systems and safety applications ensure a secure industrial working environment. • Versatile Applications: Ideal for diverse needs ranging from complete recycling lines to scrap waste management facilities. MODEL RANGE & TECHNICAL SPECIFICATIONS • FGR S: Capacity: Up to 400 kg/h | Total Power: 15 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • FGR M: Capacity: Up to 800 kg/h | Total Power: 30 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 Kdjdpfxjzquy Rs Ahbeu • FGR L: Capacity: Up to 1,300 kg/h | Total Power: 45 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • FGR XL: Capacity: Up to 2,000 kg/h | Total Power: 75 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to upgrade your industrial recycling capabilities with high-performance granulation? Contact us for a customized quotation, detailed technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Magni Lifting Hook / H 6 I / 6 Tons / Suitable for RTH & TH Series / NEW Price: €2,790.00 net / €3,320.10 gross - Max. load capacity: 6,000 kg - Width: 500 mm - Automatic attachment recognition: yes - Swiveling function: yes - Type-approved lifting hook with safety catch - High-strength, alloyed and tempered steel - Includes robust transport frame This attachment is suitable for the RTH and TH series. For the HTH series, this accessory is only available for the HTH 10.10 model. Kedpoykhtxjfx Ahbsdu Product code: ATT-05-001 We have many more Magni attachments in stock and available for immediate delivery! Mr. Herden (phone ...) will be pleased to support you. On request, we are happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We deliver the complete Magni product range for you! Subject to errors and prior sale! = Further information = New: Yes Application: Construction Please contact Marius Herden for further information.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, tool height: 200 mm, operating speed: 10 mm/s, working height: 200 mm, bending angle (max.): 180 °, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420HE Ksdoflc Spepfx Ahbsdu Horizontal bending machine, with manual control and angle fine adjustment system Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Kdedpjgqfmnofx Ahbju Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Kjdpfxsy Nfqme Ahbodu Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. Kodpfx Aev Hbdrohbodu PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 2,000 kg, Sideros turning device, column lifting and rotating unit, mobile on one side with positioning table. 2-ton load capacity. New, year of manufacture 2020, unused, with remote control. Minimum working height 350 mm. Maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical adjustment 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotational drive 0.75 kW. Lifting motor 1.85 kW. Machine height 2505 mm. Weight approx. 1050 kg. Condition: as new, unused. Shipping possible. Includes documentation, drawings, etc. Kjdpoyr Affsfx Ahbodu

Condition: used, Colour: Green Weight: 9.500 kg Price: On request Information Rexroth control for length and number Charging cradle for the reel Thickness min: 0,7-3,2mm. Working width: 1330mm. Decoiler: Metform 5ton. Centrediameter: 530-610mm. No of Straighteningrolls: 5pcs ø100mm. No of feerer rolls: 2pcs. ø100mm. Guilliotine: Morgan PG1500-3,2. Set-up: Length: 6500mm. Width: 3300mm. - Drive system: CNC - Drive type: Hydraulic - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1330 Kodpfxs Aa Ir Aj Ahbodu - Transport dimensions: 0mm x 0mm x 0mm (l x w x h) - Transport weight [kg]: 9500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, 0 15.000 kg height 790 - 1350 mm Kjdpfjxabxlsx Ahbodu width 1200 mm weight 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm

Condition: excellent (used), Technical Data: Working length: 3100 mm Distance between uprights: 2560 mm Pressing force: 220 t CNC control: OPERATOR II grafic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Bending simulation automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Laser safety system: FIESSLER Motor power: 17 kW CE marking Dimensions (LxWxH): approx. 3700 x 2400 x 2900 mm Kjdpfxjyzm Nhe Ahbodu Weight: approx. 15 tons Accessories: 1 set of tooling: 1 upper tool 120 mm 1 lower tool, segmented die: V 50, 35, 22, 16 Condition: Very good condition, complete overhaul in 2026 The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are age-appropriate; used machines are sold without any warranty.

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Ksdpowtg Hdjfx Ahbsdu

Condition: excellent (used), Technical data: Year of manufacture: 1994, retrofitted in 2026 Working length: 4100 mm Distance between uprights: 3650 mm Press force: 170 tons CNC control: OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Kjdpsz Immzefx Ahbjdu

Condition: new, 0 5.000 kg height 800 mm Kdodpfxexabyvo Ahbeu width 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 50 kW (67.98 HP), shaft diameter: 800 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery Kodpfxjzg Ikhe Ahbodu

Condition: excellent (used), Technical specifications: Working length: 4100 mm Frame width: 3650 mm Press force: 220 tons CNC control: OPERATOR OPII graphic Color screen size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: Kdedez E A Suspfx Ahbju New AMADA tools Condition: The machine is in very good overall condition. Retrofit in January 2026. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Stand width: 2125 mm Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition Ksdjvrh Rcepfx Ahbodu You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm Kodpfx Aoyibczohbedu -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Condition: new, Year of construction: 2026, overall weight: 3,000 kg, power: 35 kW (47.59 HP), shaft diameter: 400 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ksdpfx Ahoz Erbxebodu Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery