15
Catalog No. : 5647
B07l7owoqk
Type: SU-90A/ 2750
Producer: TOS
Made in: GO 1988
Characteristic:
Maximum length of the turning: 2750 mm
Turning diameter over bed (max): 900 mm
Turning diameter over cross slide (max): 600 mm
Power of the spindle: 22 kW
Length: 5100 mm
3
Technical data
H.OF CENTRES MM.500
D.BETWEEN CENTRES MM.5000+600(EXTENDED)
SWING OVER GUIDEWAYS MM.1000
SWING ON CARRIAGE MM.650
SPINDLE BORE.MM.130
RPM 500
BED LENGHìTH MM.765
QUILL TRAVEL MM.300
TAILSTOCK CM.5
OVERALL DIMENSION MM.8730x2200x1770H
WEIGHT KG.15750
Dati non impegnativi da verificarsi / Data must be verify
H8nw8av
Standard equipment
SQUARE TURRET TOLS HOLDER
STEADY REST
PLATEAU DIAM MM.1000
15
XYZ Proturn 425 SLX ProtoTRAK CNC Gap Bed Centre Lathe
ProtoTRAK SLX Control (2018)
Max’ Distance Between Centres 1250mm
Max Swing over Bed 400mm
Max’ Swing over Gap 700mm
Spindle Bore 80mm
Spindle Speeds 25 – 2500 rev/min
Spindle Motor 10hp / 7.5Kw
4 Way Indexing (Programmable) Tool Post
Tailstock MT5
Tailstock Dia’ 75mm
Tailstock Travel 160m
Manufactered 2018
Supplied with:
Machine Handbooks
S9uh3h
6 Toolholders (More available if required).
Tracking
Coolant
Worklight
Auto Lubrication
Stock...
10
Swing: 500 mm over bed / 300 mm over crossslide
Distance between centres: 4000 mm
Spindle bore: 62 mm
Spindle speeds: 20 - 2000 Rpm
Digital readout: x-axis
Featured with:
- Fixed steady ø 290 mm
- Rapid feed with joystick
Vvnfpu
Motor power: 7,5 / 11 kW
Country of origin: Bulgaria
Machine LxWxH: 7000 x 1200 x 1300 mm
Machine weight: 4000 kg
BINNS & BERRY Trident L850 Centre Lathe x 12,000mm Between Centres. Swing over bed 850mm. Swing over saddle 620mm. Distance between Centres 12,000mm. Windmill steady. 2 x 3 point fixed steadies. 3 x 2 point steadies. Coolant. Newall Digital Readout. Rebuilt in 2008
8mirydwm
4
height of centers: 330 mm
center distance: 1500 mm
max. circulation-Ø over bed: ueber Bett 690 mm
spindle boring: 82 mm
spindle retainer: Kurzkegel Gr. 8
retainer taper tailstock: 6 MK
Dajnbut
spindle speed: 7,1 - 1400 rpm
forwarding feed: laengs/plan 0,05-112/0,025-56 mm/U
thread pitch: 0,25 - 560 mm
electrical connection: 380 V, 15 kW
space needed: 3350 x 1800 x 1400 mm
weight: 4800 kg
4
Catalog No. : 5050
Type: SN 40B/1000
Producer: TOS
Made in: 1985
Characteristic:
Maximum length of the turning: 1000 mm
Turning diameter over bed (max): 400 mm
Turning diameter over cross slide (max): 220 mm
Power of the spindle: 5.5 kW
Minimum rotary speed of the spindle: 22 1/min
Spindle speed: 2000 1/min
Taper: MK 5
Length of the lathe: 2550 mm
Width of the lathe: 1100 mm
Height: 1500 mm
B3ypbs2m
Weight: 1800 kg
2
Technical data
H.OF CENTRES mm.400
D.BETWEEN CENTRES mm.4000
SWING DIAM. ON GUIDE WAYS mm.800
SWING DIAM. ON CARRIAGE mm.560
SPINDLE SPEED rpm.18-1500
TAILSTOCK TAPER CONO MORSE 6
TURRET TOOLS HOLDER MOD. 3
SPINDLE NOSE TAPER CAM LOCK 11
Bd80h9ezam
GAP : AVAILABLE
Dati non impegnativi da verificarsi / Data must be verify
Standard equipment
DRO ELBO 3 AXES
PLATEAU DIAM. mm.600
MOUVABLE REST
STEADY REST
SPINDLE CARTER
5
Vertical lathe machiningcenter
Burhhejquh
Dörries Scharmann
Type: VCE 2000/160
Pallet size: 1.600 mm
Pallet load: max. 8.000 kg
Number of pallets 13 pcs
Table indexing C-Axis 0.001°
Table cross travel (X) 2.300 mm
Column longitudinal travel (Z) 1.500 mm
Crossbeam positions: 9 steps off 100 mm
Feed X/Y/Z 1 – 6.000 mm/min.
Rapid X/Y/Z 8 m/min.
Max rotary diameter 2.000 mm
Max workpiece height 1.500 mm
Main Spindle
Spindle drive motor: 69KW
Spindle speed: 2.8 – 315 rpm...
12
Centre distance: 4000 ~ 6000 mm
Swing:
700 mm over cross slide
900 mm over bed
1700 mm in gap
Spindle speed: 6 - 600 rpm
Spindle bore: 130 mm
Length of gap: 2000 mm
Dia steady: 400 mm
Dia 3-jaw chuck: 400 mm
Gxunkodd8
Country of origin: Italy
Machine LxWxH: 6200 x 1800 x 1500 mm (bed shove in)
Machine weight: 10.000 kg
7
Code 9589
Vqyoswid
Description Lathe
Make Takang
Model TKL 530 x 2000
Serial No. 360020
Year 1992
Distance between centers 2000 mm
Swing over bed 530 mm
Swing over gap 730 mm
Swing over support 350 mm
Spindle bore 75 mm
Number of spindle speeds stepless
Spindle speeds 30 – 1500 rpm
Feeds Longitude and cross
Motor power 7,5 kW – 380 Volts
Thread cutting Metric, W.W., Modul and D.P.
Accessoiries Cooling equipment
2 steadies
Rapide toolpost
2 x Anilam ...
3
height of centers: 107 mm
center distance: 350 mm
max. circulation-Ø over bed: ueber Bett 200 mm
spindle boring: 25 mm
retainer taper tailstock: 2 MK
spindle speed: 35 - 3500 rpm
forwarding feed: laengs u. plan mm/U
thread pitch: 0,2 - 3 mm
K3iij
electrical connection: 380 V, ca. 2,2 kW
space needed: 600 x 1300 x 1230 mm
weight: 850 kg
9
Catalog No. : 5524
Type:
Producer: VDF
Made in: 1943
Characteristic:
Maximum length of the turning: 2500 mm
Equipment:
H7etttpje
Chuck
Tailstock
5
Vertical lathe machining centre
Dörries Scharmann
type: VCE 2000/160
Pallet size: 1.600 mm
Pallet load: max. 8.000 kg
Number of pallets 13 pcs
Table indexing C-Axis 0.001°
Table cross travel (X) 2.300 mm
Column longitudinal travel (Z) 1.500 mm
Crossbeam positions: 9 steps off 100 mm
Feed X/Y/Z 1 – 6.000 mm/min.
Rapid X/Y/Z 8 m/min.
Max rotary diameter 2.000 mm
Max workpiece height 1.500 mm
Main Spindle
Spindle drive motor: 69KW
Spindle speed: 2.8 – 315 rpm
ATC for t...
6
Catalog No. : 6018
Type: SN50C/2000
Producer: TOS Trenčín
Made in: 1998, GO 2022
Characteristic:
Maximum-turning length: 2000 mm
Cbnwkgtk7b
Turning diameter over bed (max): 500 mm
Turning diameter over cross slide (max): 700 mm
Maximum spindle speed: 2000 1/min
Maximum power of the main spindle: 5.5 kW
Length: 3640 mm
Width: 800 mm
Height: 1600 mm
Weight: 1940 kg
Equipment:
3-jaw chuck TOS (diameter 250 mm)
Swivel tip MK5
DRO
8
SCHERER Feinbau VDZ400 CNC Vertical 2-spindle lathe
2 pieces for sale together as line
Manufacturer SCHERER Feinbau
Fully functional
2-spindle CNC Lathes vertically with a Q-axis connected between the two machines
Siemens 840D
Documentation
B7xym7txb3
Accessories: chip conveyors, accessories as spare parts, rotary tables, or clamping by agreement
12000 kg + 12000 kg
Circulating diameter 300 mm
Z axis vertical 300 mm
X axis horizontal 1200 mm
workpiece height 180 mm
spindle with taper A6
18.3 kW
...
15
Swing of lathe 13
Length of bed 4
B3as3vbcv0
Size: 150 x 95 x 120 cm
More information about South Bend USA lathes
en.wikipedia.org/wiki/South_Bend_Lathe
3
Technical characteristics
VariatorCopying unitTool standMagnifing glass / Scope
Copying device with tool holder and bezel Max diameter: 240 mm Center length: 1800 mm FLEXI_TOUR_VITESSE1000/7000 tr/mn Power and Motors
F2znpcwqi
Overall dimensions
General:
Control: Heidenhain 4290
Control type: CNC
Machine weight: approx. 5 t
Total power requirement: 44 kW
Technical details:
Turning diameter: 410 mm
turning length: 500 mm
turret: VDI 30 with 12 positions
Swing diameter over bed: 520 mm
G7usrqh
spindle speeds - infinitely variable: 25 - 5,000 rpm
spindle bore: 79 mm
feeds - longitudinal & cross: 0 - 24.000 / 20.000 mm
rapid traverse - longitudinal/transverse: 20/24 m/min
Accessories:
Incl. tailstock, chip conveyor, chuck, C-axis and driven...
5
:FB-15 | FB-20 | FB-25 | FB-30
turning diameter:1500|2000|2500|2500 mm
faceplate diameter:1500|2000|2500|2500 mm
turning length:330 mm
max. workpiece length:450 mm
bed width:450 mm
max. workpiece weight -without tailstock:3000 kg
width of cross cariage:250 mm
3gevssq2g
spindle bore:155 (230 opt.) mm
spindle nose:A2-11 (A2-15 opt.)
spindle cone:7 MK
spindle speed:4-600|4-600|4-400|4-400 1/min
spindle speed steps:4
cross way of carriage:330 mm
movement longitudinal:1000|1000|1500|1500 mm
spindl...
6
lathe chiseltotal weight: appr. 3,5t
C7ctasd0
3
Control Unit
Brand Siemenes
Model Sinumerik
Main Drive
Spindle speed range 5000
Movement
X-Axis Movement 300 mm
Z-Axis Movement 740 mm
Workpiece
Workpiece drm 140 mm
B99b9iiobs
Workpiece weight 20 kg
This EMAG VTC 250 Vertical Lathe machine was built in the year 2010. It is equipped with a Siemens Sinumerik control unit. This machine can perform with a spindle speed up to 5000 rpm. Presents good condition.
Application Types
Turning
8
turning diameter over bed 330 mm
turning diameter over slide rest 170 mm
turning length 800 mm
centre height 165 mm
spindle bore 38 mm
turning speed range 24-2800 U/min
3-jaw chuck Ø 160
tool-holder Multifix mm
total power requirement 3,0 kW
weight of the machine ca. 850 kg
dimensions of the machine ca. 1850x800x1700 m
Ausstattung:
- three-jaw chuck Ø 160 mm
- Multifix-quick-change (steel) arbor Gr. B mit 4 Interchangeable cassettes
- Feed key
- live center
- key-type drill chuck
- Rotary ch...
10
turning diameter 400 mm
turning length 600 mm
control Siemens 820 T
turning diameter over bed slide 375 mm
face slide travel max 375 mm
spindle passage 103 mm
transmission ratio 2
turning speed range 32 - 3150 U/min
feed stepless
feeds X-axis 0,001 - 180 mm/U
feeds Z-axis 0,001 - 300 mm/U
rapid motion - x-axis 6000 mm/min
rapid traverse Z-axis 10000 m/min
turning tool - shaft cross cut max. 25 x 25
tailstock quill adjustment 100 mm
tailstock quill taper MT 4
total power requirement 52 kW
w...
6
3-jaw wedge bar lathe chuck FORKARDT TYPE F+160
Bpclnaeo
No. 1659 181
Identical in construction Forkardt F315 or SMW
diameter: 160 mm
Inner diameter: 45 mm
Chuck flange: short taper DIN 55022 size 6
1 set of chuck jaws consisting of base jaws and hard top step jaws for turning
1 set of chuck jaws consisting of base jaws and soft top step jaws for turning
- central adjustment
Weight: 11 kg
sound condition
5
faceplate diameter:1500 mm
turning diameter:1500 mm
turning length:700 mm
faceplate diameter:1250 mm
bed width:820 mm
spindle bore:155 mm
spindle nose:A2-11
spindle speeds:4-600 1/min
spindle drive:22 kW
travel -x axis:800 mm
travel - z:700 mm
servo motor X-axis:?22/3000i 3.0kw
servo motor Z-axis:?22/3000i 3.0kw kw
rapid power traverse in X-and Z direction:6/8 m/min
weight of the machine ca.:5 t
dimensions of the machine ca.:3300x2200x2500 mm
4 jaw chuck:1250 mm
CNC controller:FANUC 0i-TD mit ...
6
turning diameter over bed: 1100 mm
turning dia. over face-slide: 730 mm
turning length: 3000 mm
centre distance: ca.3000 mm
centre height: 550 mm
face slide travel: 590 mm
control: Siemens 840D
revolution per minute: I: 1 - 280 und II: 4 - 900 U/min
spindle passage: Ø 165 mm
diameter of quill: 140 mm
max. workpiece weight between centres: 6000 kg
operating hours - idle run: 8532 h
spindle hours: 2349 h
tailstock taper ISO: MK 6
tailstock quill stroke: 300 mm
Torque: 6000 Nm
total power requirem...
2
630 mm
2000 mm
315 mm
140 mm
Cbrsijtbm7
2500 U/min
D1-11 DIN 55029
8
turning diameter 1500 mm
turning length 1500 mm
control Fagor 8055 T
turning diameter over bed slide 1250 mm
total power requirement 45 kW
weight of the machine ca. 12 t
dimensions of the machine ca. 4 x 2,4 x 2x4 m
Cmnpmadn
6
max. workpiece length 3200/5100 mm
profile spindle 1 Stück
Bfamfuf9t3
main drive 12 kW
Control Beckhoff CNC
Number of axles 5 St.
9
Lathe, Metal turning machine
Manufacturer: H.Ernault-Batignolles
Type: HN400
Turning diameter: 400mm
Spindle hole: 42mm
Center distance: 1000mm
Jacplafic
1
:GN-1000 | GN-1250 | GN-1500 | GN-1750
turning diameter:1000|1250|1500|1750 mm
turning length:1500/2000/3000/4000/5000/6000/8000 mm
control:Siemens 828D
turning diameter over slide:830|1080|1330|1580 mm
bed width:820 mm
spindle nose:A2-11/A2-15/A2-20/A2-20
spindle bore:155/250/305/380 mm
spindle turning speed - stepless:4-600/4-400/4-400/4-300 U/min
x-travel:750 mm
z-travel:2000/3000/4000/5000/6000/8000 mm
rapid power traverse in X-and Z direction:6 m/min
servo motor X-axis:3 kw Fanuc / 3,3 k...
turning diameter over bed: mm
turning dia. over face-slide: mm
turning length: 3050 mm
swing over bed: 810 mm
swing diameter over slide rest: 510 mm
centre distance: ca.3000 mm
centre height: 400 mm
swing diameter: über Kröpfung: 850 mm
face slide travel: 410 mm
control: Sinumerik 805 Weiler
revolution per minute: 1 - 450 und 4 - 1800 U/min
spindle passage: Ø 106 mm
max. workpiece weight between centres: 3400 kg
operating hours - idle run: 23492 h
tailstock taper ISO: MK 6
tailstock quill stroke...
10
turning diameter 240 mm
turning length 400 mm
control FANUC 21i-T
spindle turning speed range 6-6000 U/min
z-travel 400 mm
x-travel 180 mm
C3nzqpoe
turret (x-stations) 12
total power requirement kW
weight of the machine ca. 2,8 t
dimensions of the machine ca. 4,6 x 1,6 x 2,1 m
7
turning diameter over bed max. 350 mm
centre distance 1000 mm
Tgcl90lp
multifix ja
weight ca. 809 kg
documentation vorhanden
10
Tenoning spindle 1 St.
Number of milling agregates 4 St.
Spindle diameter 50 mm
Control Weinig, PC-Nexus
#2654 Weinig Unicontrol 6 with NC spindles
-----
Specifications summary
(please inquire about any additional accessories included)
Pos. 1: Crosscut saw
-----
> Crosscut saw electronically, horizontally infinitely adjustable
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Tool diameter max.: 400 mm
> Motor power: 3.0 kW
> Laser guide light for detecting t...
Metal lathe turning machine
Model: Conventional
In perfect condition!
Manufacturer:  Gornati
Type:  Legoor 400
Center-distance: 3000mm
Turning diameter over bed: 800mm
Turning diameter in gapbed: 1050mm 
Spindle-height: 400mm
Spindle-hole: 108mm
Fhzdj9g9
Spindle-speed: 13-1000rpm
With Lynette (not pictured)
:YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000
faceplate diameter:1000|1250|1600|2000 mm
swing diameter:1350|1600|2000|2500 mm
turning height:1070|1350|1350|1700 mm
max. turning diameter:1150|1350|1800|2300 mm
table load:4|5|8|10 t
table rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/min
max. torque on the faceplate:10000|12500|18500|54000 Nm
Travel of Ram (vertical):800 | 900 | 900 | 1000 mm
Travel of ram (horiz.):1350 | 1475 | 1650 | 2275 mm
ram head dimension:230 x 230|250 x ...
6
turning diameter over bed: 660 mm
turning dia. over face-slide: 460 mm
turning length: 2200 mm
swing over bed: 660 mm
swing diameter over slide rest: 460 mm
swing diameter: in Kröpfung: 960 mm
centre distance: 2200 mm
centre height: 320 mm
x-axis: ca. 350 mm
y-axis: ca. 1.700 mm
control: Siemens 828 D ShopTurn
spindle bore: Ø 105 mm
range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min
feed continuous: X: 0,5 - 3.000 mm/min
feed continuous: Z: 1 - 3.000
rapid traverse x +...
3
turning diameter 300 mm
turning length 710 mm
control SIEMENS SINUMERIC 840
total power requirement 40 kW
weight of the machine ca. 6000 kg
dimensions of the machine ca. m
I N D E X (Germany)
CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock
and INDEX CNC Control C 200 4 (SIEMENS)
Model G 300 Year 1995 S/N 5000 65
_____
Turning - Ø, with chuck, max. 300 mm
Spindle bore 90 mm
Max. Workpiece Swing dia. 400 / 590 mm
Turning length / travel of turning slide, (X-Achse) max. 7...
5
turning diameter:380 mm
turning length:750 mm
B9rlnbojf9
control:Manual Plus Heidenhain
spindle bore diameter:45 mm
power main drive with:11 / 9 kW
main spindle speeds::3800 1/min
machine weight ab.:1900 kg
dimensions of machine:2400 x 1600 x 1900 mm
teach-in lathe,
toolholder system PARAT 25 x 25
manuals
steady moved
steady rest
3-chaw-chuck SCHUNK,
hydr. chuck dismantled,
approx. 28.600 h "machine on"
Tenoning spindle 1 St.
Number of milling agregates 4 St.
Spindle diameter 50 mm
Loading meters, approx. 8 m
weight 3500 kg
SCM Method K Super
-----
Technical specifications
-----
max. working length 2800 mm (using the stops)
min. workpiece length 200 mm (internal pin dimension)
min. workpiece height 30 mm
max. workpiece height 140 mm
Tenoning table speed 4/16 m/min
Feed speed 3-15 m/min
1. Cross-cut saw unit 4 kW
-----
Motorized horizontal positioning via freely programmable axis control
Sp...
10
turning diameter 16 mm
spindle passage 16 mm
turning length 160 mm
control GE FANUC Series 18 i-T
spindle turning speed range 8000 U/min
rapid traverse 30 m/min
total power requirement 2,2 kW
weight of the machine ca. 2,1 t
Bwzxy0bcs
Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 -
26 mm and bar lengths 1500 - 3210 mm); chip conveyor,
coolant