Used Cnc Centre Lathe for sale (13,824)

Condition: reconditioned (used), Haas ST-30 CNC Lathe / Turning Centre (2015) Haas Classic CNC Control Crsdpfx Aij Agn Dceioi Standard chuck diameter: 254 mm / 10″ Maximum turning diameter: Up to 533 mm Maximum cutting length: 660 mm Bar capacity: 76 mm / 3″ Spindle bore: 88.9 mm Maximum spindle speed: 3,400 rpm Maximum spindle power: 22.4 kW / 30 hp Standard maximum spindle torque 407 Nm at 500 rpm Spindle nose: A2-6 X-axis travel: 318 mm Z-axis travel: 660 mm Rapid traverse, X and Z: 24 m/min Tool turret” 12 stations Swing over front apron: 806 mm Swing over cross-slide: 527 m Supplied With: Three-jaw power chuck, 12-station tool turret with assorted holders, Tailstock with centre, Fully enclosed machining area, Haas control with colour screen and handwheel. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79298 Machine Serial Number: 3103531 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), operating hours: 839 h, functionality: fully functional, machine/vehicle number: 586034, turning length: 1,000 mm, overall weight: 3,000 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from December 1, 2026, to December 10, 2026! TECHNICAL DETAILS Turning length: 1,000 mm Center height above bed: approx. 250 mm Turning diameter above bed: approx. 500 mm Center height above steady rest: approx. 150 mm Turning diameter above steady rest: 300 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Connected load: 16 kVA Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,800 x 2,000 mm Machine weight: 3,000 kg Operating hours (recorded): 839 h EQUIPMENT Tailstock Csdpfx As Ahn D Ejiijri Multifix turning tool holder 3-jaw chuck, diameter 250 mm Steady rest Clamping jaws Additional chuck Machine documentation External reference: Frankenthal - Lot 363

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Cjdpfxjyaywhj Aiijri Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Hurco TM6i, 2 Axis CNC Lathe, Year 2013, Tailstock, Collet Chuck, Swarf Conveyor, Air Bench Filtermist, Hydrafeed MSV 65 Bar Feed Unit, with 3 Jaw Chuck Hurco TM6i CNC turning centre with slant bed design. Compact and reliable CNC lathe suitable for precision machining, subcontract engineering and production work. The Hurco TM6i CNC Turning Centre is a compact slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, toolroom and general manufacturing applications, the machine offers a practical solution for a wide range of turning requirements. Manufactured by Hurco, a respected builder of CNC machine tools, the TM6i is designed to provide reliable performance, machining accuracy and operator-friendly operation. Its rigid construction and compact footprint make it well suited to both production environments and smaller engineering workshops. The machine is capable of producing a wide variety of precision components and represents an excellent opportunity to acquire a quality CNC turning centre from a recognised manufacturer. Available for inspection at our Prestwick, Ayrshire facility. Codpfxs Aggphs Aiisri Specifications: Swing: 15.94" Machining Length: 13.4" Chuck Size: 6.65" Bar Capacity: 1.75" Power: 17.5 hp Max RPM: 6,000 RPM Turning Dia: 12.4"

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, bar diameter (max.): 52 mm, counter spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Main spindle Bar diameter: max. 52 mm Main spindle speed: max. 5,000 rpm Main spindle power: up to 20 kW C-axis: available Counter spindle Counter spindle speed: max. 4,500 rpm Counter spindle clamping diameter: max. 42 mm Tool turret and tool drive Turret 1: 8 tool stations Turret 2: 6 tool stations Linear tool carrier: max. 6 tools Speed of driven tools: max. 6,000 rpm Tool drive power: 3.3 kW Cedo Afwtzepfx Aiisri Rapid traverse: up to 24 m/min MACHINE DETAILS Coolant tank: 210 l Hydraulic pressure: 90 bar Dimensions & Weight Machine height: 1,750 mm Footprint: approx. 2.4 m² Machine weight: approx. 2,500 kg EQUIPMENT Synchronous/counter spindle Driven tools Bar loader up to Ø 52 mm Chip conveyor Workpiece removal via conveyor belt

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 147342, turning length: 514 mm, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Swinging diameter: max. 525 mm Turning diameter: max. 350 mm Turning length: max. 514 mm Bar diameter: max. 51 mm Spindle speed: 35–5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2-6 Spindle bore: 61 mm Tool stations: 12 X-axis travel: 190 mm Z-axis travel: 535 mm MACHINE DETAILS Credpfx Ais Afw Rroiji Weight: 5,650 kg EQUIPMENT 12-position tool turret

Condition: used, Year of construction: 2002, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Machine Type: CNC short-stroke turning machine Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2002 Loading Magazine Manufacturer: FMB Model: TURBO 5-42XT/4200/C Year of Manufacture: 2002 EQUIPMENT Knoll chip conveyor Cjdpfx Aio Aay Aasisri Compact belt filter for high pressure Parts conveyor belt Holder Driven tools Collets Various material reducers for the loading magazine Accessories required for operation

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, turning length: 250 mm, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 285 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle motor power: 7.5 kW Spindle bore: 45 mm Spindle nose: A2-5 Spindle speed: min. 60 rpm Spindle speed: max. 6,000 rpm Turning diameter: 150 mm Turning length: 250 mm Chuck outer diameter: 203 mm Swinging diameter over cross slide: 150 mm Swinging diameter over compound slide: 250 mm X-axis travel: 150 mm Y-axis travel: 60 mm Z-axis travel: 285 mm Rapid traverse Z-axis: 25 m/min Rapid traverse X-axis: 20 m/min MACHINE DETAILS Input current type: Three-phase Dimensions and weight Dimensions (L x W x H): approx. 2,000 x 1,700 x 2,000 mm Machine weight: approx. 4,000 kg Codpfxe Afxtze Aiisri EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Traub Type: M125 Year of Manufacture: 1973 Machine Type: Turning Automaton Code Ad Ik Hepfx Aiijri MACHINE DETAILS Electrical Data Operating Voltage: 83 V Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,000 mm Height: 1,600 mm Weight: 800 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1492, turning length: 620 mm, turning diameter: 240 mm, spindle speed (max.): 4,200 rpm, controller model: Okuma OSP5000L, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Spindle bore: 62–80 mm Max. turning diameter: 240 mm Swinging diameter over bed: 450 mm Csdpfx As Afxvvjiieri Swinging diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min MACHINE DETAILS Control: Okuma OSP5000L Voltage: 380 V Phases: 3 Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm EQUIPMENT Documentation/Manual

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 01190000341, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16 to November 26. TECHNICAL DETAILS General Information Machine number: 01190000341 Operating hours: 57,730 h Control system: Heidenhain CNC Pilot Electrical Data Operating voltage: 400 V Frequency: 50 Hz Connected load: 58 kVA Rated current: 100 A Working Area Turning length: 1,000 mm Maximum diameter over the machine bed cover: 680 mm Maximum diameter over the guide cover: 455 mm Cross travel: 320 mm Longitudinal travel: 1,097 mm Main Spindle Spindle diameter: 220 mm Spindle head diameter at the front bearing: 140 mm Spindle bore: 107 mm Chuck diameter: 400 / 500 mm Speed range: 4–2,800 rpm C-axis Speed: max. 100 rpm Feed and Rapid Traverse Feed force X-axis: 8 kN Feed force Z-axis: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tool Turret Tool turret: 12-station Clamping Device 3-jaw chuck: Forkardt Chuck diameter: 300 mm Credpfsz Uwzwox Aiisi EQUIPMENT 12-station tool turret Tool holders in the tool turret 3-jaw chuck by Forkardt Work table Documentation Chip conveyor Extraction system

Condition: ready for operation (used), Year of construction: 1950, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 4, turning diameter over cross slide: 560 mm, turning length: 3,150 mm, turning diameter: 800 mm, spindle motor power: 20 W, rotational speed (min.): 10 rpm, rotational speed (max.): 300 rpm, total height: 1,800 mm, total length: 6,000 mm, total width: 1,500 mm, workpiece weight (max.): 3,000 kg, type of input current: AC, overall weight: 8,000 kg, Köpping Heavy-Duty Lathe with all the accessories Codpfez Hlfyex Aiisri

Condition: good (used), Year of construction: 1990, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 104 mm, overall weight: 11,000 kg, CNC Lathe: Crjdpj Agcwaofx Aiioi SCNC 1000 DC x 2000 Year of manufacture: 1990 Control system: Fanuc O-TF Maximum swing over bed: Ø 1000 mm Distance between centers: 2000 mm Spindle bore: Ø 104 mm Machine weight: 11000 kg. Loading into a container or onto a truck is possible.

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Crjdpfe Agu A Sjx Aiiei Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: used, Year of construction: 2014, operating hours: 460 h, functionality: fully functional, For sale: a professional vertical CNC machining center, HYUNDAI WIA F400, manufactured in 2014. The machine is in exceptionally good technical and visual condition, having been used for only approximately 460 operating hours. Machines in this condition are rarely found on the used equipment market. Throughout its operational life, the machine has been regularly maintained. Even when not in use, it was started up every week, the spindle was rotated, and all axes were moved, ensuring that all mechanisms remained in excellent condition. The machine is connected and ready for inspection and testing. Key Information: Manufacturer: HYUNDAI WIA Model: F400 Year of Manufacture: 2014.05 Made in: South Korea Technical Specifications: Controller: FANUC Series 32i-Model A Maximum Spindle Speed: 12,000 rpm Automatic Tool Changer: 24 positions Power Supply: 380 V / 50 Hz Installed Power: 20 kVA Weight: 5,100 kg Operating Hours: approximately 460 h Equipment: FANUC Series 32i-Model A CNC control 24-position automatic tool changer Codpfxjzxgvms Aiieri 12,000 rpm spindle Chip conveyor Cooling system Fully enclosed work area CE certificate Application: Ideally suited for: Precision milling Machining of steel, stainless steel, and aluminum Single-piece and series production Tool manufacturing Mechanical engineering companies If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,200 kg, Equipment: documentation/manual, # TAKAMAZ SX-07 CNC lathe with FMB bar feeder – manufactured in 2002 For sale is a CNC lathe from the Japanese manufacturer TAKAMAZ, model SX-07, manufactured in 2002. The machine was fully functional until it was decommissioned and was subsequently professionally dismantled and stored. The complete system will be sold including the bar feeder magazine, chip conveyor, extraction system, and accessories. ## Technical data - Manufacturer: TAKAMAZ / Takamatsu Machinery - Model: SX-07 - Year of manufacture: 2002 - Control: FANUC Series 21i-T - Serial number: 940011 - Machine weight: 2,200 kg according to the nameplate - Tool turret - Main and counter spindle ## Operating data according to the control system - Control system switched on: 95,815 hours - Feed time: 23,599 hours - Total part counter: 8,324,144 pieces ## Equipment - FMB Turbo 3-26 bar feeder magazine (year of manufacture unknown) - Chip conveyor - Extraction system Codpfx Aie Ah Eitoisri - Various tool holders and accessories as shown in the pictures - Operating manual available ## Condition and inspection The machine was fully functional until it was dismantled. It has already been dismantled and stored, but can be powered up for inspection. A complete machining demonstration cannot be guaranteed in the stored condition. Inspection is possible after prior appointment. Sale from warehouse. Loading and transport by arrangement.

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine in working order; used, requires repair Technical specifications: Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum rotational speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Axis feed rate - "working": 0.1 - 2000 mm/min Cutting fluid - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment: Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2 pallet magazine; pallet loading station; machine table - a total of 2 pallets Chip transport system - yes Codpfezvnbxjx Aiiori Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German Currently, the machine has been disassembled from the hall and is ready for loading into a container. Arranging for the container and the company that will load the machine into the container is the responsibility of the buyer.

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min Codsq H Tr Tspfx Aiieri TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT ; USB PORT

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Gurutzpe CNC lathe, model AT 600-Plus x 2000mm, equipped with Siemens CNC, featuring a Sauter automatic tool turret with 4 positions, a 105mm through-hole, a longitudinal feed rate of 10,000mm for the Z-axis, a transverse feed rate of 8,000mm for the X-axis, a 40Kw motor, 380V power supply, a bed width of 630mm between guides, a Morse taper of 5, a tailstock spindle diameter of 140mm, a main carriage length of 795, a transverse carriage width of 375, and a turning diameter over the bed of 1200mm. Accessories include a 3-jaw universal chuck with a 500mm diameter, a 4-jaw independent chuck with a 1000mm diameter, a fixed steady rest, and a traveling steady rest. It also has a chip extractor. The lathe is in very good condition. Crsdpfx Aij Ahrhxoiei

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Credpfs Ah Adbex Aiisi Bar capacity:102 mm Main spindle: Technology:Direct drive spindle Speed:4,000 rpm Power:48 kW Torque:680 Nm Bar capacity:102 mm C-axis:0.001° Chuck:Hainbuch Spanntop 100 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow Clamping Cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:4.000 rpm Power:48 kW Torque:680 Nm C-axis:0.001° Chuck:Hainbuch Spanntop 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Partially Hollow Clamping Cylinder 848 mm Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 barCoolant Coolant Temperature Control Tool monitoring:Easy Tool Monitor Tool Breakage Monitoring:Swivel Wire Touch Probe:Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software Option IV:Gear Cutting and Gear Shaping Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop :

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 58281, working width: 1,700 mm, input voltage: 400 V, working length: 2,200 mm, number of slots in tool magazine: 18, control type: CNC control, Rittal Perforex BC 1007 HS CNC drilling and milling centre for automated machining of enclosures and flat panels: cut-outs, holes and threads straight from EPLAN Pro Panel / DXF. Built 2018 in Germany. Machine no. 58281, Rittal part no. 4050.107. Specification: - Clampable flat panels (W x H): 2450 x 1700 mm Codpfx As Ahq D Hsiieri - Max machinable panel area: 2200 x 1700 mm - Clampable enclosures (W x H x D): 1400 x 1600 x 1600 mm - Max machinable area, enclosures: 1200 x 1600 mm - Tool holder: pick-up system, 18 positions - Control: 4-axis CNC, Rittal OptiPanel, 15" monitor - Electrical supply: 400 V, 3-phase, 50 Hz, 32 A max - Control voltage: 24 V DC - Footprint (W x H x D): 4390 x 2410 x 2720 mm - Transport size (W x H x D): 3800 x 2300 x 2500 mm - Weight: approx. 2,300 kg Key features: - Enclosure (cube) and flat-panel machining - Pressure plate with swarf extraction - High-performance spindle, minimum-quantity lubrication - Automatic tool breakage check - Pneumatic clamping, DIN tooling - Machines mild steel, stainless, aluminium, copper and plastics - Direct import from EPLAN Pro Panel, DXF import Supplied with: - Safety guarding with light curtains - Operator console and keyboard - Tool magazine with tooling - Rear enclosure-machining bay - Control cabinet - Operator documentation Specification from Rittal published data for the BC 1007 HS; buyer to verify configuration on inspection. Viewing by appointment in Sunderland, UK. Buyer to arrange disconnection and collection unless agreed.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16212-51, turning length: 1,300 mm, turning diameter: 400 mm, spindle motor power: 68 W, total height: 2,900 mm, total length: 6,391 mm, total width: 2,495 mm, overall weight: 12,000 kg, Equipment: documentation/manual, For sale is a CNC lathe, GF Georg Fischer lathe FMS NDL-40/130, with Siemens 840D control, including 2 additional chucks. Max. workpiece diameter: 400 mm Max. workpiece length: 1300 mm Selling price ex works Condition: Good condition, the machine is powered and can be tested. Upon request, I can also send a current video demonstrating the most important functions. Important terms of sale (B2B only): The sale is exclusively to commercial enterprises. By submitting a bid or making a purchase, you confirm that you are acting as an entrepreneur within the meaning of § 14 BGB. Exclusion of liability: The sale is made with the exclusion of any liability for defects in materials and workmanship. Warranty: No warranty or guarantee is provided. Returns: No returns or exchanges are permitted. Liability for damages resulting from injury to health, body, or life, as well as from gross negligence and/or intentional breaches of my obligations as a seller, remains unlimited. Permitted delivery area (EU internal market only) The sale and transfer of ownership of this machine are exclusively to commercial buyers with a registered office and delivery address within the European Union (EU). A sale to third countries (e.g., Switzerland, the United Kingdom, the USA) is excluded. A valid VAT identification number (VAT ID) must be provided for invoicing. Cjdpfx As Agrhdoiieri

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 145078, overall weight: 4,600 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Weight: 4,600 kg EQUIPMENT Chuck Note: The machine is sold without tooling. The following technical data are based on manufacturer specifications. The seller cannot guarantee their accuracy: TECHNICAL DETAILS Cjdpfx Aij Agfi Deijri Swinging diameter over bed: 525 mm Swinging diameter over cross slide: 350 mm X-axis travel: 190 mm Rapid traverse X/Z: 30 m/min Main spindle speed: 35–4,000 rpm Main spindle power: 18.5 kW Spindle bore: 76 mm Bar passage: 64 mm

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 01620006501, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,800 mm, total length: 4,500 mm, total width: 2,200 mm, overall weight: 3,000 kg, bar passage: 65 mm, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 620, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, nominal power (apparent): 21 kVA, operating hours of spindle: 10,771 h, DMG NEF 400 CNC lathe - Swing diameter over bed: 385 mm - Max. swing diameter over carriage: 350 mm - Distance between centers: 805 mm - Z-axis travel of tailstock: 680 mm - Height of spindle flange from ground: 1000 - 1010 mm - Diameter of spindle flange: 170 H5 mm - Diameter of chuck: 200/250 mm - Diameter of spindle bore: 87 mm - Diameter of draw tube: 67.5 mm - Diameter in the front bearing: 100 mm - Incl. C1 axis, speed: 200 rpm Cedpfj Afun Isx Aiijri - Feed force in X/Z axis S1: 4.5 / 6.2 kN - Feed force X/Z axis S6: 6 / 8.5 kN - Ball screw X/Z axis: 32 x 10 mm - Diameter of tool holder: VDI 30 - Number of tools: 12 pieces, of which 6 are driven - Tool shank: 20 x 20 mm - Tailstock travel: 680 mm - Max. feed force: 680 daN - Morse taper: MK 4 The machine is equipped with a tailstock, a SAUTER turret, and a three-jaw chuck from the manufacturer SCHUNK, jaw width: 210 mm, with hydraulic clamping, including various VDI 30 tool holders, some driven and some standard, some fitted with lathe accessories, as well as a chip conveyor and documentation. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2012, overall weight: 6,000 kg, CNC capacity 2000x800mm spindle bore 106mm Crodpfe Ahq Dxjx Aiiji total power 45kW weight 6000kg