Used Northern Climate Hall Heating for sale (17,379)

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm Kedpoxbgrgjfx Anujnc • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register Knjdpfx Aju Scqbjnuoc -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance. The most well-known product from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install air circulation unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall, depending on the standard configuration. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of equipment, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready Knedpfex Ihiiex Anujc These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust gas connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day-night-week program - Exhaust gas extraction via the roof, version B or C * - Exhaust gas extraction through the exterior wall, version C * Gas-fired air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat output (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m3/h Protection class: IP20 You can find more new and used products in our shop! International shipping costs on request!

Condition: used, ApenGroup LRP28DE Gas-fired hot air generator Gas type: G20 natural gas Connection pressure: 20 mbar Nominal heat input QN: 27 kW Nominal heat output: 24.63 kW Connection voltage: 230V 1N, 50Hz Kjdpfx Ansx Ihlksujnc Air volume flow: 2700 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 output sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall itself. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L with day/night/week program - Exhaust gas discharge via the roof, version B or C - Exhaust gas discharge through the outer wall, version C Gas-fired air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Kodpfx Aex Ihg Isnuonc Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. rated heat input (Hs) QN: 30.08 kW Max. rated heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi .: 21022588 -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW Knjdpfjfixa Iex Anusc -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Condition: used, Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW Knjdpevrdr Nsfx Anuec -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 Knedpfx Aneu Scqhjuec -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg Kedou Tlhvspfx Anujnc -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register Knjdpfx Ansu Tytaousc -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4114/403/441 -Fan: Ziehl-Abegg -Operating pressure: max. 13.4 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 710/550/H495 mm -Weight: 60 kg/piece

Year of construction: 2015, condition: used, Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater Knjdpfx Asfixa Hsnuoc -Eltra item no.: 1BGL1CE04001 -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats honeywell gas regulator Knjdjhrnv Nopfx Anusc enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: new, Year of construction: 2026, Firebox output: 175 kW Operating output: 140 kW Flue diameter: 200 mm Kjdji Hplrspfx Anusnc Warm air duct: 1 x 500 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air flow rate: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air ducts: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: new, Year of construction: 2021, Industrial Fabric Storage Hall for Sale – Approx. 500 m² For sale: a well-maintained industrial fabric hall with an area of approximately 500 m². The hall is suitable for use as a warehouse, production facility, or for storing timber, machinery, and equipment. - Approximate floor area: 500 m² - Robust steel frame construction - Durable PVC/fabric cladding - Large sliding doors - Separate personnel access door - Good internal headroom - Easy access for forklifts and other machinery - The hall can be dismantled and reassembled at another location - Currently erected and available for inspection Ksdjz Im Edspfx Anusnc Price: Upon request / negotiable. Dismantling and loading for transportation can also be arranged separately.

Condition: used, Year of construction: 2020, Nominal output: 29.8 kW Air flow rate: 2400 m³/h Combustion chamber depth: 580 mm Loading door: 330 mm x 330 mm Ksdpfx Aoz A Eapenuenc Heatable volume: approx. 600 m³ Heatable area: approx. 120 m² Space requirement: approx. 600 mm x 800 mm x 1900 mm Weight: 230 kg Flue pipe diameter: 160 mm Warm air outlet nozzle: 2 x 200 mm Operating modes: Automatic and manual Chimney diameter (approximate): 200 mm

Condition: new, Year of construction: 2026, Firing chamber output: 34 kW Working power: 29 kW New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Knedpfxjpkwhqs Anujc Smoke outlet diameter: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Condition: new, Year of construction: 2026, Firebox output: 49 kW Working output: 45 kW New device, original packaging: yes Hot air blower, flue gas blower, control unit with digital display: included Hot air ducting: 2 x 200 mm with freely rotatable, plug-in bends Flue gas outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Kodpok Utrdofx Anusnc Airflow: 3500 m³/h Power consumption: 550 W Designed for room volume: 1000 m³ Area to be heated: 200/250 m² Oven height without hot air ducting: 1750 mm Oven width: 700 mm Oven length without flue gas blower: 1150 mm Weight: 305 kg

Condition: new, Year of construction: 2026, Firebox output: 34 kW Working output: 29 kW New unit: yes, original packaging Warm air blower, flue gas blower, control unit with digital display: included Warm air ducting: 2 x 180 mm with freely rotatable, plug-in 90° bends Diameter of flue gas outlet: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow rate: 2200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Area to be heated: 100/150 m² Knjdpfx Anek Utrajujc Oven height without warm air ducting: 1560 mm Oven width: 550 mm Oven length without flue gas blower: 920 mm Weight: 190 kg

Condition: excellent (used), For sale: a climate chamber in excellent technical and visual condition. If you have any questions, please feel free to contact me. Technical specifications: Chamber capacity: 749 liters Operating temperature range: From 0°C to +70°C (without humidity control) From +5°C to +70°C (with humidity control) Humidity control range: from 10% to 90% RH (relative humidity) Knedpjz Tc Hiofx Anuec Cooling/heating: Peltier technology (very energy-efficient, with low vibration) Internal dimensions (W × H × D): 1040 × 1200 × 600 mm External dimensions (W × H × D): 1224 × 1720 × 755 mm Power supply: 230 V, 50/60 Hz Maximum power consumption: 1050 W

Condition: new, Year of construction: 2026, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg Kodpspn Nyzsfx Anuonc

Condition: new, Year of construction: 2026, Combustion chamber output: 510 kW Working output: 407 kW New, original packaging: Yes Smoke vent diameter: 250 mm Hot air supply ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Combustion chamber height: 900 mm Air supply: 26,000 m³/h Power consumption: 4500 W Designed for room volume: 8000 m³ Area to be heated: 1800 m² Oven height without hot air supply ducts: 3000 mm Oven width: 1220 mm Oven length without flue gas fan: 2700 mm Kjdpsk Utrwsfx Anuonc Weight: 1575 kg

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Knedsz Snbwjpfx Anuec Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: new, Year of construction: 2026, Firebox output: 175 kW Working output: 140 kW Exhaust duct diameter: 200 mm Kedpfxsk Utrpo Anusnc Warm air supply pipes: 3 x 250 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air supply: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air supply pipes: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: new, Year of construction: 2026, Firebox output: 125 kW Working output: 99 kW Diameter of flue outlet: 180 mm Warm air supply pipes: 2 x 250 mm Firebox length: 750 mm Firebox width: 560 mm Firebox height: 700 mm Air supply: 6300 m³/h Power consumption: 1500 W Designed for room volume: 1500 m³ Area to be heated: 300/350 m² Oven height without warm air supply pipes: 1980 mm Knodpfxsk Utrho Anuec Oven width: 800 mm Oven length without flue gas blower: 1280 mm Weight: 415 kg

Condition: new, Year of construction: 2026, Firing chamber output: 350 kW Working output: 279 kW Exhaust duct diameter: 200 mm Warm air supply ducts: 3 x 300 mm Firing chamber length: 1200 mm Firing chamber width: 740 mm Knodok Utrtspfx Anusc Firing chamber height: 1040 mm Air supply: 17800 m³/h Power consumption of warm air blower: 3 kW Power consumption of flue gas blower: 600 W Designed for room volume: 5000 m³ Area to be heated: 1000 m² Oven height without warm air supply ducts: 2500 mm Oven width: 1100 mm Oven length without flue gas blower: 1900 mm Weight: 850 kg