Used Tb Sprint 303 for sale (3,292)

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm Ksdpsxnb Hfsfx Abfsdn – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 303 CS 2816, total width: 2,000 mm, total length: 8,000 mm, total height: 2,000 mm, Equipment: compressor, Collating Machine Theisen & Bonitz tb sprint 303 CS – 8 Stations – with Stitching Unit – Year of Manufacture 1999 For sale is a Theisen & Bonitz tb sprint 303 CS collating machine featuring 8 collating stations and an integrated stitching unit. Ksdpfeyucwgex Abfjdn This machine is ideally suited for producing brochures, booklets, catalogues, and multi-page print products, and is a proven solution for print shops and finishing operations. The robust construction of the tb Sprint series ensures reliable and long-lasting performance. Thanks to its compact design and user-friendly operation, the machine is suitable for smaller production lines as well as for integration into existing setups. Technical Data Manufacturer: Theisen & Bonitz Model: tb sprint 303 CS Year of Manufacture: 1999 Machine No.: 303 CS 2816 Number of Stations: 8 Equipment: integrated stitching unit Application: brochure and booklet production Condition Used, commensurate with age. Scope of Delivery Machine as described and shown in the photos. Inspection / Availability Inspection possible by appointment. Immediately available – subject to prior sale.

Condition: ready for operation (used), Year of construction: 2008, Theisen & Bonitz tb sprint 310 VP / 304 QSM / 503 stitch- fold- trimming unit 304 QSM 2 stitching head Hohner Universal 48/5 front cut stream delivery TB 503 - 2008 - Theisen & Bonitz tb sprint 503 form punching, multiple ups inline with Theisen & Bonitz tb 303 or tb 304, or offline Kdedpjxnb Agsfx Abfjn Delivery time: immediately from stock

Condition: good (used), Year of construction: 1998, Stitching, folding and cutting machine, Theisen Bonitz TB Sprint 808 08, machine number: 303QS2198, year of manufacture: 1998, 2 Hohner stitching heads, front trim, in good condition, available immediately. Kodpfx Aex S Iwzebfedn

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, stack height: 30 mm, paper weight (max.): 1,000 g/m², product length (min.): 500 mm, product width (max.): 350 mm, Equipment: CE marking, No reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the equipment by 17/10/2025. As these are floor-level machines, extraction is straightforward. The offer includes one tb sprint B 312 VP and one tb sprint 304 QSM! Both machines were fully overhauled in 2023. --- tb sprint B 312 VP TECHNICAL DETAILS - Stations: 12 - Variable stack height: up to 30 cm - Formats: max. 35 x 50 cm, min. 6.5 x 10 cm - Paper weights: 18 to 1,000 g/m² - Throughput: up to 3,200 cycles/h MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - EQUIPMENT - CE marking - Jogger bridge as a removable transfer to connecting machine - Manual feed station left - Lateral air blast - Individually adjustable single suction and blow nozzles - Controlled air separation and blast - Photocell sheet miss-feed detection per station - Electromechanical double-sheet detection at the delivery (motorized adjustment) - Overlapping shingle conveyor for transverse transport - Paper jam detection for transport table - Table illumination - Manual feed station right - Delivery jogger for standard or offset stack, selectable via switch - Total and pre-set counters - Digital speed display in cycles/h, infinitely adjustable --- tb sprint 304 QSM TECHNICAL DETAILS - Formats: max. 35 x 50 cm, min. 6.5 x 15.5 cm - Smallest booklet: 6.5 cm spine length x 6.5 cm - Throughput: up to 3,100 cycles/h (format and paper dependent) Stapling - Stitching heads: 2 slim heads for standard stapling up to 5 mm (Hohner Universal) - Fold-down boxes: complete with fold-down boxes and wire spools - Automatic stapling thickness adjustment - Block stapling: up to maximum format - Cross adjustment: of the staples relative to the fold Folding - Fold system: frictionless knife fold with automatic thickness adjustment and re-pressing for approx. 120 sheets of standard 80 g/m² paper - Channel punch-out: single for block stapling Trimming - Front trim: upper and lower knives incl. air blast for trims to 6.5 cm and offcuts greater than 1.5 cm - Format adjustment: stepless for front trim - Head and foot trim: 3–20 mm each for approx. 80 sheets of standard 80 g/m² paper - Knives: upper and lower - Waste paper box: included - Continuous operation: same formats as 303 QSM Kdsdsxb Dbxjpfx Abfen Delivery - Shingle conveyor: shortened version with double-sided motorised feed and continuously adjustable shingle spacing - Delivery angle: format-adjustable for booklets and block stapling MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - Machine Configuration - Version: Quick Set motorised (QSM) - Feed rollers: with upper belt transport system - Vacuum belt: included - Motorised format changeover: included - Fine adjustment: two handwheels (independent for head and foot) - Size readout: two digital counters, 0.1 mm increments - Motorised alignment: to collating machine

Condition: good (used), Year of construction: 2009, mast type: telescopic, lifting height: 20,000 mm, fuel type: diesel, General information Mileage: 152.000 km Weights Empty weight: 3.500 kg Kdedpfozd Nxhox Abfen Functional Lifting capacity: 200 kg Working height: 2.200 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Max. horizontal reach: 1400 m Transport dimensions (LxWxH): (L/B/H): 7,20 m / 2,10 m / 3,00 m Additional information Please contact Tobias Mayr for more information

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Ksdpfozday Dex Abfjdn Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: used, Year of construction: 2022, OVERVIEW his TecnoBodega Ingeniería / TB Ingeniería C1EL self-adhesive labelling and capsule machine, manufactured in 2022, is designed for the application of front labels, back labels, tax stamps and capsules on bottles. The machine is suitable for compact bottling lines in wine, spirits, liqueur and beverage production. The machine is equipped with 3 labelling heads and can process bottle formats with a height range from 140 to 370 mm and a diameter range from 50 to 100 mm. It works with paper self-adhesive labels and supports label sizes from 40 to 105 mm in length and 18 to 150 mm in height. The system includes a bottle transport conveyor, infeed timing screw, independent self-adhesive labelling heads, capsule distributor and capsule application unit. It also features automatic speed regulation according to bottle flow and integrated machine safety systems. The machine is built in stainless steel with transparent safety guarding and is operated via a Weintek HMI terminal. The observed configuration includes label reel support discs, internal label dispensing heads, bottle guiding elements, timing screw and conveyor system. TECHNICAL DATA Manufacturer: TB Ingeniería / TecnoBodega Ingeniería Model: C1EL Machine Type: Self-adhesive labelling and capsule machine Year of Manufacture: 2022 Number of Labelling Heads: 3 Labelling Formats: Front label, back label and tax stamp Label Type: Paper self-adhesive labels Production Capacity: approx. 1,000 – 1,500 bottles/hour Capacity for Shrink Capsules: up to approx. 2,000 bottles/hour on Bordeaux bottles Ø76 mm Bottle Height Range: 140 – 370 mm Bottle Diameter Range: 50 – 100 mm Core / Mandrel Diameter: min. 76 mm Maximum Reel Diameter: 250 mm Label Length Range: 40 – 105 mm Label Height Range: 18 – 150 mm Control Interface: Weintek HMI terminal Included Components: Bottle conveyor, infeed timing screw, self-adhesive labelling heads with independent feed, capsule distributor, capsule application unit Included Features: Automatic speed regulation according to bottle flow, machine protection and safety systems, compact line integration Construction: Stainless steel frame with transparent safety doors Safety: Emergency stop, safety guarding and warning labels Condition: Used, installed in production environment Kedpfx Aozdya Nsbfedn

Condition: new, WEISS 5.5AZK 71L-4T B14P105 motor, serial number: 303194, unused, 100% functional, scope of delivery as per photos. Kdjdjy Sdu Aspfx Abfon

Condition: excellent (used), mileage: 43,014 km, power: 95 kW (129.16 HP), first registration: 03/2002, fuel type: diesel, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro3, number of seats: 3, Year of construction: 2002, BELGIAN FIRE TRUCK FORMERLY IN FIRE DEPARTMENT SERVICE EXCELLENT CONDITION QUICK-SHIFT GEARBOX Kdsdpfezdrl Djx Abfen = More Information = Engine displacement: 2,148 cc Unladen weight: 2,720 kg Payload: 780 kg GVWR: 3,500 kg Technical condition: very good Visual condition: very good Please contact Thierry Leemans for more information.

Condition: excellent (used), mileage: 520,328 km, power: 120 kW (163.15 HP), first registration: 12/2019, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 7, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,970 mm, total width: 2,020 mm, total height: 2,620 mm, permissible axle load (axle 1): 1,650 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2019, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, sliding door, traction control, General information Number of doors: 6 Registration number: VDH-97-G Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Transmission Transmission: 7G-TRONIC, 7 gears, Automatic Axle configuration Tyre size: 235/65R16 Brakes: disc brakes Front axle: Max. axle load: 1650 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Max. axle load: 2250 kg; Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 2.356 kg Carrying capacity: 1.144 kg GVW: 3.500 kg Functional Kdedjyyygqjpfx Abfon Cooling: 20 °C to 20 °C Make of bodywork: CARRIER PULSOR 350 MT Bitemp Cooling engine: diesel and electric Wall thickness: 8 mm Maintenance APK (MOT): tested until 12/2026 Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Adaptive Cruise Control - Climate control - DAB Radio - Electric folding mirrors - Heated door mirrors - Leaf spring suspension - MBUX Audio - Multifunctional Steering Wheel - Multitemp - Partition - Radio/Cd/Audio system - Reversing camera - Side Door Right - Spare wheel - Standby 230V = Remarks = VIDEO: Very beautiful and neat Mercedes Sprinter 316 CDI 2.2 Euro 6 163 HP Automatic Carrier Pulsor 350 MT Bitemp Refrigerated Van 2 Compartments can be operated independently Compartment 1: L 1247 mm / W 1559 mm / H 1747 mm Compartment 2: L 2833 mm / W 1559 mm / H 1747 mm Stand-by 230 V / Day and night cooling +20C / -20C Cools, freezes, and heats Vehicle has served as an international medicine transport vehicle Technically and visually in very good condition

Condition: used, mileage: 55,900 km, power: 125 kW (169.95 HP), first registration: 11/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,500 mm, loading space width: 2,050 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine, dimensions, or other features? Please do not hesitate to contact us. We offer attractive financing and leasing options – also for the Netherlands, Austria, and new businesses! Vehicle: Wheelbase: 3665mm * 9G-Tronic automatic transmission * Single cab * Twin tires on rear axle * Gross vehicle weight 3.5 tons Technology/Comfort: Digital radio (DAB) * "Tempmatic" air conditioning * Cruise control * Electrically adjustable, extended, and heated exterior mirrors * Multifunction steering wheel * 71L main fuel tank * Armrest for driver's seat * Double passenger seat * 3-seater configuration * "Maturin" black fabric upholstery * Electrical pre-installation, configurable special module * Storage compartment above the windshield * Rear window * Front cupholders * Central locking with remote control * Electric front windows * Outside temperature display * Fuel filter with water separator Kodpfsyg Tpdox Abfodn Safety: * Crosswind assist * Lane keeping assist * Pre-installation for intelligent tachograph EU * Attention Assist * Halogen headlights * Outline marker lights * Side marker lights * Adaptive brake light * Seatbelt warning system * Jump-start terminals * Hill start assist * Hold function * Underrun protection (ECE) Refrigerated box: * Floor reinforced with anti-slip surface * Two rear doors with individual locking and 270° opening angle * Side door with individual locking and step * Combination anchor/tie-down rail (1 on the left & 1 on the right) * Interior and exterior LED lighting * Drainage holes in the front of the box * Double sealing system at the loading opening * Lateral underrun protection * Wheel arch with mud flaps Refrigeration unit: * ThermoKing V500X (-20°C) * Operation during driving and when stationary * Temperature recorder (thermograph) * Dual-temperature pre-installation Additional extras for the body are available for an additional charge. Note: Please call before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Individual customization is possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale reserved. Best regards, Pimenta Automobile

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Ksdpfoyf E N Tsx Abfedn Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Condition: ready for operation (used), Theisen & Bonitz 303 stitching unit Booklet Maker / Brochure Finishing Equipped with 2 Hohner stitching heads and delivery belt. 9-station high-pile collating machine Complete with 1 pump Kdjdpfx Asy Sip Ejbfjn Max format: 350 x 50 cm

Condition: used, In this offer you purchase a used "EMC Isilon X400 - 32 TB " Agility and Flexibility: EMC Isilon X-Series is the first scale-out storage solution capable of scaling throughput from a few terabytes to over 20 petabytes and over 100 gigabytes per second (GBps), all within a single file system. Kdederxcvdepfx Abfen Sale item: 1 x EMC Isilon X400 - 32 TB + 400G SSD/ 48G/ 2x10GE SFP + 2x1GE with the following equipment: 3x32 TB HDD/400GB SSD 3.5" 3x48GB Ram, 12X4G 6x6 metre CX42QSFP Hybrid Cable 3x KIT 2SFP + Optic 10GB (ISO00125223, -227, -388) 2x QLogic 18 Port QDR Switch (CNVS491200146, CNVS491200150) 10 GBE, Dual-Port SFP + Without Optic Isilon Software Upgrade Enterprise Snapshot IQ Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been functionally tested and is equipped with the latest Isilon OneFS8 software. Shipping is possible on request!

Condition: good (used), Year of construction: 2020, DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 Kdjdpfeyxcmqjx Abfen -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.

Condition: refurbished (used), Year of construction: 2011, operating hours: 818 h, Hako Scrubmaster B45 TB 430 with On-Board Chemical Dosing. Refurbished scrubber-dryer with new batteries, new suction turbine, and much more – includes 6 months warranty and new DGUV V3 electrical safety inspection with test report. Working width without squeegee: 43 cm Working width with squeegee: 76 cm Maximum area coverage: 1,700 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Kodpsu Stndofx Abfjdn Traction drive: Yes Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / Performed repairs: - New suction motor 24V 400W - 2 x 12V 85Ah GEL batteries (new) - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses replaced (new) - New disc brushes - New ACLA rubber wheels - New squeegee blades - New fresh water filter In addition, we offer: Service, repairs, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2012, operating hours: 2,134 h, Hako Scrubmaster B45 TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and new DGUV V3 electrical inspection with test certificate. Working width without suction bar: 51 cm Working width with suction bar: 86 cm Max. area performance: 2000 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / repairs carried out: - Suction motor 24V 400W new - 2 x 12V 85Ah GEL batteries new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses new - Disc brushes new - Support wheels new - Squeegee blades new Kdsdsu Sr U Nspfx Abfjn - Fresh water filter new Additionally, we offer: Servicing, repair, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, input voltage: 24 V, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) Kodjyanpfspfx Abfjdn - Fresh water filter (new) In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Kjdpfxsza Alhe Abfedn Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Accerories Kodozd Tcwopfx Abfodn Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor CNC turning center with 3 turrets and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 18.5" touchscreen control panel, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed fence, 1350 mm MOT Kjdszdzlmspfx Abfedn Edge magazine, fully automatic for coil and strip material, MOT Gluing station GLU-JET cartridges – hot melt and PU adhesive, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle Press unit 1913 mot., motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of 0-10° bevel on the miter saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius trimming Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end faces, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as anti-static agent at the press unit Infeed area, electronically controlled release agent spray device Press unit, electronically controlled anti-static spray device Outfeed area, electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is FACTORY REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW total power requirement 22 kW weight of the machine ca. 9 t Kjdpfx Ajzdk Evsbfodn dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992, OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Kdjdpjy Emnxofx Abfjn

Condition: like new (used), Year of construction: 2023, operating hours: 3,000 h, TB 395 including central lubrication system and bucket package. Ksdszd Snfjpfx Abfjdn