Used Hardness Tester for sale (1,622)

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Fluke installation tester 1664 FC incl. accessories Gcedpfxsxr A Ifo Ag Dea

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Gcedpfxoxqxw Te Ag Doa Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: ready for operation (used), Bathless Dissolution Test System with 6 Vessels. The DISTEK Evolution 6100 Bathless Dissolution Test System is a revolutionary piece of equipment that eliminates water bath issues with its patented bathless technology. It is designed to meet today's demanding standards for accurate temperature control and test reporting, maintaining much tighter tolerances for temperature and RPM than conventional water bath systems. The unit has been tested and comes with a 30-day warranty, with slight cosmetic blemishes from normal use. With six complete sets of vessels, lids, shafts, paddles, and heating jackets, the Evolution 6100 offers enhanced precision and functionality. It offers rapid media heating, precise individual vessel temperature control, and advanced method storage and sorting capabilities. Key Features Patented bathless technology for accurate temperature control 6 complete sets of vessels, lids, shafts, paddles, and heating jackets Rapid media heating and precise individual vessel temperature control Advanced method storage and sorting capabilities Specifications Dissolution Vessels: Six Standard/Up to Seven Vessels Gcedpfxewg Rrwj Ag Dsa Volume: 500mL - 1000mL programmable Vessel Heating Rate: Approx. 1.5C per minute RPM Control Range: 25-300 RPM, digitally controlled, closed loop Resolution: 0.1 RPM Accuracy: 0.2 RPM Display: LED's, .75 (19mm) high Motor: High Torque, Permanent Magnet Vessel Temperature Control: Independently controlled two-zone heater jackets Display Resolution: 0.01 C Accuracy: 0.25 C Interface Ports: RS-232 (2), RS-485 (1), Parallel Printer (1) Construction Materials: Cast Aluminum, Stainless Steel, Acid resistant solid state heating elements, Engineered Plastics Electrical Power: 115V 15V 50/60Hz 15A or 230V 15V 50/60Hz 9A Weight Metric: 86.1826 kg Imperial: 190 lb Dimensions Metric: 27.94 cm x 53.34 cm x 116.84 cm Imperial: 11 in x 21 in x 46 in Harmonized Code 841989

Year of construction: 2020, condition: used, SPITZENBERGER & SPIES – On-Board Power Supply Simulation System PAS 15000/GN/KFZ/OPD The following tests can be performed according to the specifications: • Audi BDM LAH XXX.915.181.XX • ISO 7637-2 • ISO 16750-2 • ISO 21848 • LV 124 • SAE J 1113-11 • VW TL 80101 • VW TL 82066 • VW TL 82366 The system includes: • Power Supply NT 15000/GN/Kfz • SyCore • Two-Quadrant Amplifier PAS 15000/GN/Kfz • Surge Protection Device OPD 15000/GN/Kfz Condition: Inspection required. Price: €8,999.00 Pickup location: 58-500 Jelenia Góra, Poland. Device weight approx. 1000 kg. Gcedpfx Ajxn Dfdsg Dja Damage: Display – F VAT invoice included

Year of construction: 2010, condition: excellent (used), Clamping pressure tester make Prema Gcsdjfd Encspfx Ag Dsa max.pressure 100 MPa Clamping - diameter 220 mm Weight 12 kg

Condition: used, functionality: unexamined, machine/vehicle number: KT 3881H / A2110, input voltage: 230 V, SPS Electronic KT 3881H multifunction insulation tester on frame Manufacturer: SPS Electronic Model: KT 3881H / A2110 Voltage: 230V (50Hz) Gcjdpfx Agjxlgu Aj Dsa On mobile frame with extra cables

Condition: ready for operation (used), A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Gcsdpfx Aexhnr Usg Doa

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Gcjdpfx Aoxqxt Ieg Dja Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Godexhcklepfx Ag Dsca Year of manufacture: 2011 The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the description of the item may occur and are subject to change.

Condition: used, max. wheel diameter 0-200 mm max. module 25 Gjdpfx Aotuxa Uog Dsca min. module 0,5

Condition: excellent (used), Schleich GLP2-E safety tester, insulation tester GLP2E tester Item condition: Used, in perfect condition SHELF-B-PD(BOR) You can find more testers - new and used - in our store! Gcodpjivd I Sofx Ag Doa International shipping costs on request!

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: G-233F | G-203, Used Triotech G-203 Bubble Tester/Leak Detector Set/System Manufacturer: Trio-Tech International G203 Model: Trio-Tech G-233F Filtration system, Trio-Tech G-203 Gcedpfx Agexiwb Ue Dja System with several tools, filtration system, stainless steel control unit, several baskets, air pump. Power: 220 volt. Table not included

Year of construction: 2023, condition: ready for operation (used), A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible. Gcsdpfsxghn Hex Ag Dja

Year of construction: 2017, condition: good (used), - Standard deviations: 0.01 g/l Gcedpfx Agowff A Io Dja - In good condition

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement Gcjdpfx Agsf Axn Ae Dsa - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: good (used), Year of construction: 1965, Measuring machine, manual Erichsen cupping testing machine, cupping testing machine, sheet metal testing machine -Manufacturer: Klingenthal Gcsdjw H N Dlopfx Ag Dsa -Type: 05 -Sheet metal testing machine: Erichsen cupping, up to 2.0 mm -Accessories: see photos -Dimensions: 460/360/H335 mm -Weight: 20.5 kg

Year of construction: 2025, condition: as good as new (ex-display), machine/vehicle number: Demo-Impact-300, Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule Gcedpfx Ageptcwo Dsa - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Gjdpon E S T Usfx Ag Doca Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: ready for operation (used), Scales: Rockwell/Rockwell Superficial, max. workpiece height: approx. 180mm, max. test depth: approx. 165mm, dwell time: approx. 3s, data output: Digimatic/RS-232-C, machine dimensions X/Y/Z: approx. 250mm/520mm/780mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Gcedpfx Aoxc Niwsg Doa

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Gcodpfx Agoifpg As Dea Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Godpfxod Dc Uno Ag Djca Many other ELABO devices under stock numbers 57820 and 57821

Condition: excellent (used), Pharmatron 5Y tablet tester The hardness tester is ideal for measuring the breaking of tablets. Cycle time 25 tablets / 3mins, up to 33mm tablet diameter, 1Ph Gcsdpjiy Nm Rsfx Ag Dsa

Condition: as good as new (ex-display), KT 638-3, adaptronic test technology, high voltage tester Model: 0KT 638-3 Condition: As good as new Gsdpfxsur R Hco Ag Djca

Condition: used, Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate Gjdpfok Egkwjx Ag Deca -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Gjdpfxom H Uqks Ag Dsca