Used Tester for sale (175)

Condition: excellent (used), Description Professional device for measuring axial runout, concentricity, and straightness of rotating parts Measuring range up to approximately 235 mm between centers Precise Kafer dial indicator 0.01 mm, Made in Germany Stable cast iron base with a guideway Two spindles with centers, similar to a lathe, for holding cylindrical components Bed lock and adjustable measuring arm Very good condition Equipment ready for immediate use Ideal for inspecting shafts, bushings, hubs, pins, and other precision components Knedpfx Afjw Rd A Noijc Set includes: Device with centers Kafer dial indicator 0.01 mm Holder with arm Centers and knobs Equipment for quality control in a toolroom or measurement department

Condition: used, Chroma Type: ATE 17020 PTS The Chroma 17020 PTS is a highly professional, modular test system for lithium-ion and other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through multiple channels or higher current ranges - Enterprise-grade deployment thanks to extensive safety features & data persistence Technical Data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS Kedpfx Afjwwrxaeisnc System type: Regenerative battery pack test system (charge/discharge testing) Power per channel: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage ranges: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amperes up to > 300 A per channel Parallel operation: Yes, for higher current up to 2600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measurement data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 µs – 1 s / buffer for 60 min power outage Test modes: CC, CV, CP, CC-CV, DCIR, Pulse, Drive Cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection features: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat through energy recuperation Temperature monitoring: Optionally integrable, range 0–90 °C ±2 °C Dimensions & weight: Depending on configuration (e.g., 19″ rack, approx. 300 kg) Power supply: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) Feel free to contact us by phone for further questions.

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm Kodpfx Aeu N Avxefionc interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: good (used), Hardness tester WOLPERT Testor - HT 1E Brinell: 250 kg Kjdsu T Na Nepfx Afionc Rockwell: 150 kg Projection: 125 mm Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Space requirement approx.: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150

Condition: ready for operation (used), Reicherter Briro VA I Hardness Tester Rockwell Hardness Tester 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf You are welcome to come for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. Kedpfx Afexp Dbboionc For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Year of construction: 2023, condition: used, Axle distance: approx. 40-175 mm, max. test piece diameter: approx. 200 mm, net weight: approx. 110 kg, adjustable measuring force: approx. 1-11 N, power consumption: approx. 0.2 kW, control/switch FRENCO, serial number: 30020-000147, various measuring accessories, 1 operating panel, single-track/single-door, 1 DELL flat screen, approx. 22 inches, year of manufacture: 2022 Knedpjxnamdefx Afiec

Condition: used, brinell hardness 250 kg Ksdpfxeuvd Hdj Afionc rockwell hardness 150 kg throat 125 mm workpiece height max. 200 mm weight of the machine ca. 70 kg dimensions of the machine ca. 400 x 200 x 700 mm Test load: 62,5 / 100 / 150 / 187,5 / 250 nell Dto. 100 und 150 kg Rockwell. Device untested because we are not familiar with it. Machine dealer with own stock of 1600 m².

Year of construction: 2020, condition: used, SPITZENBERGER & SPIES – On-Board Power Supply Simulation System PAS 15000/GN/KFZ/OPD Kodpfexn Dfdjx Afienc The following tests can be performed according to the specifications: • Audi BDM LAH XXX.915.181.XX • ISO 7637-2 • ISO 16750-2 • ISO 21848 • LV 124 • SAE J 1113-11 • VW TL 80101 • VW TL 82066 • VW TL 82366 The system includes: • Power Supply NT 15000/GN/Kfz • SyCore • Two-Quadrant Amplifier PAS 15000/GN/Kfz • Surge Protection Device OPD 15000/GN/Kfz Condition: Inspection required. Price: €8,999.00 Pickup location: 58-500 Jelenia Góra, Poland. Device weight approx. 1000 kg. Damage: Display – F VAT invoice included

Condition: used, Year of construction: 1957, brinell hardness 250 kg rockwell hardness 150 kg throat 130 mm checking height 300 mm weight of the machine ca. 0,150 t Kjdpfxou T R Tks Afienc dimensions of the machine ca. 650 x 530 x 1550 m Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: used, functionality: fully functional, PROCEQ Equo Tip 2 Hardness Tester: - Wide measuring range - Hardness reading in split seconds - Suitable for all metallic materials - Measures in any direction Knsdpfxow Eb Igo Afisc - Data transfer to PC / printer - High accuracy ± 4HL (0.5% at 800 HL) - Instant digital display of hardness value - Contents: as pictured - Vickers, Brinell, Rockwell Shipping available for an additional €19.90. #8330-1

Condition: ready for operation (used), Bathless Dissolution Test System with 6 Vessels. The DISTEK Evolution 6100 Bathless Dissolution Test System is a revolutionary piece of equipment that eliminates water bath issues with its patented bathless technology. It is designed to meet today's demanding standards for accurate temperature control and test reporting, maintaining much tighter tolerances for temperature and RPM than conventional water bath systems. The unit has been tested and comes with a 30-day warranty, with slight cosmetic blemishes from normal use. With six complete sets of vessels, lids, shafts, paddles, and heating jackets, the Evolution 6100 offers enhanced precision and functionality. It offers rapid media heating, precise individual vessel temperature control, and advanced method storage and sorting capabilities. Key Features Patented bathless technology for accurate temperature control 6 complete sets of vessels, lids, shafts, paddles, and heating jackets Rapid media heating and precise individual vessel temperature control Advanced method storage and sorting capabilities Specifications Dissolution Vessels: Six Standard/Up to Seven Vessels Volume: 500mL - 1000mL programmable Vessel Heating Rate: Approx. 1.5C per minute RPM Control Range: 25-300 RPM, digitally controlled, closed loop Resolution: 0.1 RPM Accuracy: 0.2 RPM Display: LED's, .75 (19mm) high Motor: High Torque, Permanent Magnet Vessel Temperature Control: Independently controlled two-zone heater jackets Knjdpowg Rrwsfx Afisc Display Resolution: 0.01 C Accuracy: 0.25 C Interface Ports: RS-232 (2), RS-485 (1), Parallel Printer (1) Construction Materials: Cast Aluminum, Stainless Steel, Acid resistant solid state heating elements, Engineered Plastics Electrical Power: 115V 15V 50/60Hz 15A or 230V 15V 50/60Hz 9A Weight Metric: 86.1826 kg Imperial: 190 lb Dimensions Metric: 27.94 cm x 53.34 cm x 116.84 cm Imperial: 11 in x 21 in x 46 in Harmonized Code 841989

Condition: used, functionality: unexamined, machine/vehicle number: KT 3881H / A2110, input voltage: 230 V, SPS Electronic KT 3881H multifunction insulation tester on frame Kedpfoxlgu Aex Afionc Manufacturer: SPS Electronic Model: KT 3881H / A2110 Voltage: 230V (50Hz) On mobile frame with extra cables

Condition: good (used), Year of construction: 1972, hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine -Manufacturer: Wolpert -Type: Dia Testor 2 Rc -Remark: Hardness tester according to Brinell/vickers and Rockwell with base cabinet Ksdpju Hbadofx Afisnc -Type: Dia Testor 2 Rc -Accessories: as per photos -Dimensions total: 845/780/H1780 mm -Weight: 318 kg

Year of construction: 2010, condition: excellent (used), Clamping pressure tester make Prema Kodpfefd Encox Afienc max.pressure 100 MPa Clamping - diameter 220 mm Weight 12 kg

Condition: used, New: Yes Kedpfjxifgljx Afijnc Empty weight: 1 kg Part suitable for: trucks Battery tester 12V 185-1125 (EN) LED display Article nr.: PSBT07-veiling Battery tester 12V 185-1125 (EN) LED display

Condition: ready for operation (used), A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Kjdpoxhnr Ujfx Afisnc

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Year of manufacture: 2011 The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Kjdpfx Afjxhcklsienc Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the description of the item may occur and are subject to change.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: G-233F | G-203, Used Triotech G-203 Bubble Tester/Leak Detector Set/System Manufacturer: Trio-Tech International G203 Model: Trio-Tech G-233F Filtration system, Trio-Tech G-203 System with several tools, filtration system, stainless steel control unit, several baskets, air pump. Knodpfx Asxiwb Uofisc Power: 220 volt. Table not included

Condition: used, Manufacturer: Wolpert Kjdpfx Aoxcu Rajfienc Type: 751 N

Condition: used, Portable hardness tester IMPACT with integrated impact device Type: TH-130 Hardness testing methods: Rockwell, Vickers, Brinell, Shore Minimum specimen thickness: 3mm with support Battery operation up to 8 hours Printer connection - usable in all positions, including overhead - precise and reliable hardness measurement according to ASTM A956 - Dynamic, fast hardness testing method with direct hardness value display on the screen - Charger - Operating instructions Kjdpsxciwusfx Afienc The handheld device displays hardness values in all common scales such as HRC, HRB, HV, HB, and HS.

Condition: used, New: Yes Empty weight: 10 kg Part suitable for: trucks Type number: 455.0110 KS TOOLS 455.110 OEM : 455.0110 Article nr.: KS4550110-veiling Knodpsxh Tfmjfx Afisc Cooling system pressure tester

Year of construction: 2023, condition: ready for operation (used), A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible. Knsdpfx Aexghn Hsfiec

Condition: excellent (used), Schleich GLP2-E safety tester, insulation tester GLP2E tester Item condition: Used, in perfect condition SHELF-B-PD(BOR) Knedjivd I Sjpfx Afisc You can find more testers - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät Kedpfx Afjvbwzijijnc • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: • Hardness tester • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear.

Condition: used, max. wheel diameter 0-200 mm max. module 25 Knsdpfx Aetuxa Uefisc min. module 0,5