Used Grinding Spindle for sale (15,594)

Condition: used, Jung F 50 Surface Grinding Machine Laedpfx Absyuy Euszog Condition: Used Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg

Condition: used, Cylindrical Grinding Machine: Schaudt Model: RFH 500 Ledpfsy R Dlfjx Abzsag Condition: used Centre height: 100 mm Centre distance: 500 mm Spindle speeds: 2225 / 2500 / 2825 rpm Grinding wheel diameter min./max.: 200 - 300 mm Weight, approx.: 1900 kg Equipment: - Manual & automatic operation - Coolant system - Machine lamp - Emergency stop button - Machine leveling feet

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground Ledpsp Dt Ttsfx Abzoag - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale Lajdpfop Dt T Nox Abzog - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Lajdpfxexzq I Se Abzeg Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Dimensions: 850 x 850 x 1650 mm Equipment: - Cast column on adjustable ball roller bearings Lsdovnriuspfx Abzeag - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure - Operating and maintenance instructions - CE declaration of conformity

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. table load: 300 kg Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast iron parts, such as machine frame, table, etc., made of MEEHANITE® quality cast iron - Automatic transverse and longitudinal feed - Permanent lubrication - Automatic transverse feed device - Rear splash guard Ledpfod Sfd Eox Abzjag - Grinding wheel - Grinding wheel flange - Dressing device - Balancing arbour - Balancing scale - Dressing diamond - Machine lamp - Leveling elements - Operating tool - Operating manual - CE Special equipment for our stock machine: - Electric magnetic chuck 300 x 600 mm (fine-pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical feed AD 5 (NC-controlled) for model AH - Function: Automatic rapid traverse vertically and automatic fine feed vertically - Automatic demagnetization control for magnetic chuck - Coolant system with magnetic separator - Manual dressing device - Part enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for transverse feed - Grinding wheel and flange for normal steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations available on request.

Condition: used, Year of construction: 1986, HK Orion surface grinding machine Condition: Used Laodpfx Abozdq Nbszog Year of manufacture: 1986 Technical data: Magnetic clamping table: 500 x 1,000 mm Automatic alignment system Automatic feed function Electronic handwheel Machine light

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 400 x 800 mm Installation height (max. distance spindle/table): 550 mm Max. Table load: 400 kg Motor power main spindle: 3,7 kW Connection: 400 V Dimensions (LxWxH), approx.: 3450 x 2050 x 1900 mm Weight, approx.: 3250 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light Lsdpfx Asp Dt Uijbzeag - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 3060 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: new, Made in Italy. Ledpfjd Nk Ncox Abzeag Maximum turning height: 300 mm Turning diameter over bed: 600 mm Turning diameter over slide: 380 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm Motor power: 9.2 kW (optional equipment / standard: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock ram diameter: 85 mm Tailstock ram travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic lubrication of the guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick-change tool holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g., Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: chuck guard with Plexiglas panel, secured by microswitches. Tool holder guard with Plexiglas panel. Rear splash guard over the entire length. Lead screw and feed screw protection by light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip container on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price including 3-axis digital readout.

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Lajdpfxjy T E Rzs Abzeg Year of manufacture: 2000 Technical data: Table: Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Laodpfsz Dnt Iex Abzog Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, overall weight: 1,050 kg, input voltage: 380 V, type of input current: three-phase, For sale: VEB Schleifmaschinenwerk Berlin / WMW SI 40×70 cylindrical grinding machine, manufactured in 1962, serial number 1334/62, Made in Germany. The machine is complete and in working condition. The machine can be inspected and tested on-site before purchase. WMW / VEB Schleifmaschinenwerk Berlin is known for its robust industrial grinding machines designed for heavy-duty workshop and production applications. Technical data: Manufacturer: WMW / VEB Schleifmaschinenwerk Berlin Type: SI 40×70 Serial number: 1334/62 Year of manufacture: 1962 Country of manufacture: Germany Total weight: approx. 1,050 kg Electrical diagram: SI 40-007 Wiring diagram: SI 40-008 Power supply: 3-phase AC Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Condition: Used, operational condition. Inspection and test run are possible before purchase. Transport: Transport can be arranged throughout Poland after prior agreement. Sales document: Lsdoznvqlopfx Abzeag VAT invoice or receipt available. Contact: Please contact us to arrange inspection, collection, or transport.

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: STÖCKEL Type: FX 60/30 SPS Year of manufacture: 2008 Grinding area: approx. 600 × 300 mm Magnetic chuck: approx. 600 × 250 mm Speed: 1900 rpm Grinding height: 400 mm Lasdez Dkuuopfx Abzsg Drive power: 9 kW Operating voltage: 400 V / 50 Hz Table load: 250 kg Control: PLC Weight: 3000 kg

Condition: ready for operation (used), Year of construction: 2001, DELTA LB 300 - Cup grinding machine - Grinding area max. 330x140mm - Speed range max. 2840 rpm - Max. distance table - grinding wheel 280mm - Distance grinding spindle / column approx. 300mm - Cup wheel dimensions 200x80x78mm - Drive power approx. 3 kW - Coolant system - Machine housing - Grinding wheel guard Lasdpfsz Dix Sox Abzsg - Machine feet - Documentation Dimensions: L x W x H 0.7 x 1 x 1.8 meters / Weight 500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2006, Glass edging and grinding machine Laodpfjxvcq Isx Abzog

Condition: used, Year of construction: 2012, functionality: fully functional, NEPTUN ROCK 11 – Year 2012 Lajdpfozz Smpjx Abzsg Straight line edge grinder with 11 wheels for flat edges, Thickness 3-40 mm Speed 0.5-5 m/min. Power 25 kW Overall dimensions 8089 x 2340 x 1450 mm Weight 3500 kg

Condition: ready for operation (used), functionality: fully functional, total height: 1,840 mm, total length: 1,700 mm, total width: 1,750 mm, type of input current: three-phase, overall weight: 1,850 kg, travel distance X-axis: 490 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 115 mm, grinding spindle motor power: 2,200 W, input voltage: 400 V, spindle nose: HSK 63, Tool grinding machine EWAG RS15 Ledpfx Aszz Rtujbzjag TECHNICAL CHARACTERISTICS: Stroke X axis: 490 [mm] Stroke Y axis: 130 [mm] Stroke Z axis: 115 [mm] Grinding spindle motor power: 2.2 [kW] B axis swivelling stroke: 260 [°] Workpiece spindle nose: HSK 63 Variable power feeding: Yes Digital read out: RSF-Elektronik Number of axes Digital Read Out: 3 Lubrication tank capacity: 100 [l] Centralized lubrication: Oui Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight: 1850 [Kg] INCLUDED EQUIPMENT: x1 EWAG dividing head (HSK63 tapper) x1 cross table x1 FR15 adjustable-speed grinding spindle drive x1 OR15 adjustable X-axis oscillator (oscillation frequency: 0–68 min⁻¹) x1 mounting unit for PRO15M metric projector (measuring travel: 150 mm) x1 MARCEL AUBERT Ø150 mm profile projector Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.

Condition: excellent (used), Barely been used. Vry good condition. Number of spindles: 23. Centerdistance: 32 mm. Max space between the outermost spindles: 704 mm. Max. boring depth: 65 mm. Lajdpfx Abez Dhc Aozeg 2 cylinders. IN STOCK. We ship all over europe.

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various Lasdpfxoz Df Txj Abzeg configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Lodpfozz Hk Nex Abzsag Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: new, Fanuc A06B-0854-B300 #3030 AC Spindle Motor, Model: ?6, Serial number: as shown in the photo, unused, 100% functional, (fan cover missing). Scope of delivery: as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Laodpfx Aei D H N Dobzog

Condition: ready for operation (used), Fanuc A06B-0830-B330 AC spindle motor, serial number: C978K0311. The terminal box is damaged; see photo. Used, with normal signs of wear and tear. 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Ledei D H Nnepfx Abzsag

Condition: ready for operation (used), Fanuc A06B-0726-B202 spindle motor, serial number C918K0141, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Lajdpfxji D H I Hs Abzjg

Condition: ready for operation (used), Fanuc A06B-0857-B928#3441 spindle motor, serial number C03YK0709, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of supply as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Ljdpfx Aji D H Raebzoag