Used Hollow Spindle for sale (12,832)

Condition: good (used), Hollow spindle stroke Kwjdpedbc E Nefx Ah Not Diameter 125 mm Weight 6.6 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Kwodpfx Asxzgkijh Njt Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Kwjdpoxf E Rcsfx Ah Njt Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: Lehmann electrol 5035, turning diameter over cross slide: 914 mm, turning diameter: 914 mm, center height: 647 mm, turning diameter over top slide: 914 mm, spindle bore: 409 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, turning diameter over bed slide: 1,295 mm, overall weight: 18,636 kg, swing diameter over cross slide: 914 mm, total height: 2,100 mm, total length: 5,500 mm, total width: 2,320 mm, air pressure: 7 bar, distance between centers: 2,844 mm, 16 1/8" Lehmann Hollow spindle Oil country Manual Lathe machine 5035 with attachments Semi-automatic threading system ,Taper Attachment,front & rear Chucks 36” 4-jaw, 16 ¼ hole Swing Over Bed Ways 51” - Swing Over Cross Slide 36” - Distance Between Centers 112” - Motor 75 HP 500 RPM Kodpfx Aotp T Azoh Nowt Model: Lehmann electrol 5035 Serial No: 501616-010 input voltage : 3 phase -380 - 460 V Manufacturer : Lehmann -USA Manufacturing date : 1982 Weight: 41,000 lbs.

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Kwedpfx Aewxb Ereh Nst Weight: 13000kg

Condition: good (used), Spindle / Spindle Kodpop I T Rqofx Ah Nowt 3.5 - 16 - 10 kVA 2750 - 14660 - 23660 rpm Inspection is possible by prior appointment at my warehouse!

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm Kedpfstty Nkex Ah Njwt -Electrical data: 380V; 43A; 22kW

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS Travel distance X: max. 840 mm Travel distance Z: max. 425 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS High-pressure pump: up to 120 bar per line Kodpfx Aeyap Najh Njwt Machine weight: 8,000 kg Cooling: Spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers

Condition: good (used), functionality: fully functional, Spindle moulder, Type F - Year of manufacture: 1977 - 3, 4, 5, 6, 8, 10,000 rpm - Forward/reverse rotation - Spindle diameter: 30 mm - Clamping length: 140 mm - Wooden fence with fine adjustment, rotatable - Table size: 1200 x 800 mm - Weight: 700 kg - Equipped with Holz Her 3-roller power feed Kwodpfxex E Dctj Ah Njt - MARGIN TAXED (differential taxation)

Condition: excellent (used), functionality: fully functional, Comec FMC 900 4M + CA Pneumatic Drilling Machine Automatic loading from magazine Ksdpfx Ajycb Hish Nowt Number of spindles: 3 Maximum workpiece length: 900 mm Maximum workpiece width: 100 mm Maximum drilling distance: 800 mm Drilling capacity depending on workpiece length: 500–1100 pcs/h Intended for large batch production of chairs, beds, cribs, as well as components for other furniture pieces

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Kwsdpfx Ahov Ai N Uj Net Storage location: Nattheim

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Kwodewhqpropfx Ah Njt

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Ksdpfxowhqpls Ah Newt

Condition: used, Year of construction: 2006, Spindle moulder, milling machine Casadei F222L Kwedpewnhybofx Ah Not Spindle diameter: 50mm Tiltable 45 degrees. Serial number: 06T3001 Weight: 891 kg 10 KW 400 V Including Maggi feeder - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 06T3001 - Main motor power [kW]: 10 - Spindle diameter [mm]: 50 - Tiltable spindle: Manual - └ Max. tiltability [°]: 45 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1990, functionality: fully functional, Top-mounted control panel, electric spindle height adjustment, 30 mm spindle, electric tilt 45°, 6 speeds, motor power 7 kW, cast iron fence jaws, large table 2500 mm, Haffner 4-roller feed with 8 speeds, dimensions 2500 x 1300 mm, weight 1000 kg, good condition. Price ex location. Transport available at additional cost! Kwjdpsyaq U Defx Ah Nst

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter: 290 mm, turning length: 750 mm, total length: 1,400 mm, total width: 700 mm, total height: 1,030 mm, rotational speed (max.): 1,800 rpm, spindle mount: MK 3, The following features and characteristics make the G2930 combination lathe unique and competitive in the market: 1. V-shaped guideways provide superior stability and are securely anchored. 2. The gearbox is fixed for maximum stability and offers comprehensive feed and thread cutting functions. 3. State-of-the-art tapered roller bearings support the D1-4 spindle with the highest precision. 4. Automatic vertical feed enables maximum threading capabilities. 5. The cross-slide is equipped with T-slots. 6. Guideways are effectively controlled by adjustable gibs. 7. Advanced gearbox design with maximum functionality. 8. Maximum working area due to the lowered bed section. 9. Carriage-mounted spindle is operated by a lever arm. Kedpexb Up Tjfx Ah Nowt 10. Two feed screws are integrated. 11. User-friendly forward/reverse interface with zero backlash. 12. Versatile tailstock that can be offset for taper turning. 13. Emergency stop button, load switch, process control, etc., are installed. TECHNICAL DATA Max. turning diameter over bed: 290 mm Max. turning diameter over cross slide: 165 mm Distance between centers: 750 mm Spindle taper: MT5 Spindle bore: 38 mm Max. tailstock travel: 80 mm Tailstock taper: MT3 Longitudinal carriage travel: 560 mm Cross-slide travel: 140 mm Compound slide travel: 80 mm Cross feed: 0.017~0.25 mm/rev, 15 steps Longitudinal feed: 0.07-1.0 mm/rev, 15 steps Metric thread: 0.2-3.5 mm, 18 steps Imperial thread: 8-56 TPI, 21 steps Spindle speed range/steps: 50~1800 RPM, stepless Motor power: 1.5 kW Further dimensions and weight: Overall dimensions: 1400 x 700 x 1030 mm Packing size: 1450 x 750 x 970 mm Net weight: 290 kg Gross weight: 310 kg

Condition: like new (used), Year of construction: 2015, Pick-up Threading device Kwedpfx Ajyck Rdjh Not No. 04 turning slides Integrated loader Cucchi BLT model MULTI-6, year 2016

Condition: good (used), Electrospindle Main spindle OMLAT IMA 12 KW The price includes the C-axis shown. If you only require the main spindle, we will of course grant a discount. 1st tool holder: Type: HSK F63, similar to DIN 69893 Taper diameter: 38 mm 2. tool retraction: Automatically controlled Pull-in force: 11000 N 3. tool weight: Maximum weight: 6 kg 4. direction of rotation: Right/left rotation, programmable 5. speed range: Kedpjrhzlnefx Ah Nswt Infinitely adjustable from 1500 to 22000 revolutions per minute Programmable for individual requirements 6. drive: Frequency-controlled three-phase motor 7. drive power: 12 KW in S-1 operation 8. spindle lubrication: One-time factory grease lubrication for efficient maintenance 9. spindle cooling: Water cooling to maintain optimum operating temperatures 10. constant performance: Range from 12,000 to 22,000 revolutions per minute Spindle condition: Used but tested The main spindle was removed from a running system and carefully checked. As an alternative to new spindles, which are often not available, it guarantees immediate use and optimum reliability. This used spindle offers a cost-effective solution without compromising on performance.

Condition: good (used), functionality: fully functional, overall weight: 48 kg, FISCHER IMA Main Spindle FEZPS 100×88.3 HSK F63 Motor Spindle Electrospindle with C Axis No. 123866 | Art. No. 123866 – IMA CNC (spindle motor, main spindle, c axis) Art. No.: 123866 Manufacturer: E. Fischer AG Machine focus: IMA CNC Marking on spindle: FEZPS 100×88.3 HSK F63 Serial range on spindle: 123866 Serial No.: as per nameplate Manufacture date: 15.07.2004 Technical description Offered here is an original FISCHER main spindle, model FEZPS 100×88.3 with HSK F63 tool interface, for IMA CNC machining centers. The FEZPS 100×88.3 HSK F63 designation is the critical identifier for this spindle and is decisive for compatibility verification. Additionally, this spindle is equipped with an integrated C axis (W axis) and a mounted permanent magnet motor. Kwjdpfx Ahjychd Uj Net Connections and configuration The spindle features multiple connections in the upper terminal box: • Main power connector for motor supply • Separate circular connectors for C axis and encoder signals • Coolant connections at the spindle base marked WATER IN and WATER OUT • Connection for Protecting Air Flow for compressed air sealing The arrangement, design, and pin configuration of these connectors are machine and type-specific and must be compared with your original spindle before purchase. Technical data as per nameplate Type: mW 13.5/10 4 No.: 964207 Class No.: B Rated voltage: 28 to 380 V Frequency: 25 to 400 Hz Rated current: 2.6 to 2.8 A Rated power: 0.55 to 1.2 kW Rated speed: 680 to 11,900 rpm Protection rating: IP55 Number of poles: 4 Efficiency: 81.1 % Model: FEZPS 100×88.3 Weight Approx. 45 kg Dimensions Approx. L × W × H = 420 × 220 × 650 mm Technical application Deployed as main spindle in IMA CNC machining centers with C axis for precise milling, drilling, and positioning operations. Important note on compatibility The compatibility of this spindle must be confirmed absolutely based on the designation FEZPS 100×88.3 HSK F63, article number 123866, nameplate data, and arrangement of the connections in the upper terminal box. The housing number is for internal reference only and is not sufficient for reliable identification. Condition Used, tested and functional Signs of use as per photos

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, Used Spinner VC 1150, spindle replaced in November 2025 X travel: 1,150 mm Y travel: 620 mm Z travel: 800 mm Direct measuring systems on X/Y/Z axes Control: Siemens 840DE Kodpfxjycc Hqe Ah Nowt High-precision milling spindle up to 14,000 rpm as built-in motor spindle with direct drive (no belt), water-cooled Tool holder on spindle: SK 40 Machine operating hours: 22,954 Tool magazine with 32 tool stations as high-speed changer with double-arm gripper design and fast-moving tool chain

Condition: new, Year of construction: 2024, functionality: fully functional, FIVE STAR THM-460 Horizontal dual-head milling machine with indexing axis Ideal machine for milling and chamfering P-plates for toolmaking from 4 sides in one clamping. Basic technical equipment: Control system - FANUC 0i-MF - User-friendly touch screen, 10.4" color display - Dialog-supported data input Machining capacities - Workpiece length min./max.: 20 - 460 mm - Workpiece width min./max.: 20 - 460 mm - Workpiece height min./max.: 12 - 150 mm (opt. 180 mm) - Workpiece corner chamfer Cmax.: 10 mm Travel paths - X-axis (machine table): 620 mm - Y/Z-axis (infeed axis/headstock): 330 mm / 330 mm Drive power of the axes - X-axis motor: 2.5 kW - Y/Z-axis motor: 1.4 kW - B-axis motor: 1.4 kW Speeds - Rapid traverse X (machine table): 15 m/min - Rapid traverse Y (infeed axis): 10 m/min - Rapid traverse Z (headstock): 10 m/min - Manual feed: 0 - 1,500 mm/min - Automatic feed: 0 - 5,000 mm/min Main spindles - Two horizontally opposed milling spindles, designed for heavy-duty cutting - Drive type: Belt drive - Speed range: 100 to 1,000 min-1 each - Drive power: 11 kW each - Spindle interface: 2" / Ø50.8 mm each - Oil-cooled with separate spindle oil cooler (optional) Tools (standard) - Cutter head: Ø160 mm (opt. Ø200 mm) Note: Tools not included in the standard scope of delivery! Rotary axis (B-axis) - Indexing: (standard 5° pitch) - Indexing angle: 0°, 45°, 90°, 135° and 180° (for 2-sided machining) - Table size: Ø320 mm - Max. Max. load: 320 kg Workpiece alignment - 90° stop for easy positioning of the workpieces by the operator - Automatic measuring unit for detecting the workpiece position Guides - X-axis: Linear roller guide - Y-axis: Flat guide, TURCITE-B coated - Z-axis: Flat guide, TURCITE-B coated - 2 chip spirals (left and right) in the machine - Automatic spiral chip conveyor Miscellaneous - Central lubrication oil / air - Switch cabinet with heat exchanger - Machine sheet metal partial cladding - Support work table - Hand tool box - LED work light - 3-color warning light - CE declaration of conformity according to European directives Machine dimensions and weight - Machine size: 2,800 x 3,410 x 2,200 mm Kwsdovi I Nmspfx Ah Nst - Machine weight: approx. 7,500 kg Spindles - Power-Up spindle motor 15kW - Spindle interface 1-7/8" each, suitable for face cutter head Ø200 mm arbor diameter: Ø47.625 mm tools - Face cutter head Ø200 mm, MAROX-Tools Taiwan Type: SE545R/L0810, DC200 Rotary axis (B-axis) - Indexing axis, 5° increments, standard option Indexing angle: 0°, 45°, 90°, 135° Table size: Ø320 mm Max. Load capacity: 320 kg Compressed air, coolant and chip management - Chip compressed air nozzle, 1 piece each, external to the spindles, standard option (metal compressed air articulated tube) - Coolant system with separate cooling lubricant tank and low-pressure pump, as well as paper filter, tank capacity: 600 liters Filter capacity: 80 l/min. - Chip spirals (left and right) in the machine, standard option - Automatic hinged belt chip conveyor

Condition: used, Universal Facing and Boring Head WOHLHAUPTER Type UPA 3 Serial No. 54562 Tool Holder: SK 40 - M16 + OTT ring groove Tool Shank Holder: Ø 18 mm Adjustment Accuracy: 0.01 mm - Accessories as pictured - Original wooden storage box Kedpsxcbl Refx Ah Nowt Total weight: approx. 5 kg Good condition

Condition: good (used), Year of construction: 1966, Milling fence with fine adjustment Sliding table Crosscut saw Aigner table extension with feed unit Holz-Her ETZ, 8 speeds 380 volts Kwodox U Dfgspfx Ah Not

Condition: used, heavy-duty tilting spindle moulder Martin T27 automatic tilting – 46° automatic height adjustment precision fence with fine adjustment control panel at eye level, swivelling, with 5.7" touchscreen Kedpjx U Arxefx Ah Nswt spindle travel 150 mm spindle diameter 30 mm spindle with 6 speeds: 3,000 to 10,000 rpm motor 7.5 kW with electric brake machine is WORKSHOP TESTED – TOP CONDITION first delivered in 2010 machine from school environment only approx. 300 operating hours available from stock Lieboch

Condition: not inspected (used), Year of construction: 1965, functionality: unexamined, machine/vehicle number: 103/65, total height: 2,750 mm, table width: 500 mm, table length: 400 mm, pressing force: 110 t, For sale: Weingarten mechanical press 110 ton. Kwjdpfxsybz Sve Ah Net This press is from Maschinenfabrik Weingarten A-G and was built as a robust industrial press. The machine was originally always a direct drive press. At a later stage, a conversion to a trimming press was started, but this project was never finished. As a result, the press has been out of operation for several years. The basic structure of the press is still in good condition. Specifications (according to nameplate): Brand: Weingarten Type: P125 Press force: max. 110 tons Ram stroke: min. 100 mm – max. 300 mm Year of manufacture/delivery: 24-02-1965 Serial number: 103/65 Condition: used, project not completed.