Used Genome Sequencer for sale (362)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Bledpjxqxw Tjfx Ap Aoh Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Bsdpfx Apjxqxt Is Ajlh Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: new, Year of construction: 2026, functionality: fully functional, filter area: 120 m², volume flow: 15,000 m³/h, total width: 2,000 mm, total length: 2,450 mm, total height: 8,500 mm, Equipment: documentation/manual, AIR FLOW RATE: 15,000 m³/h Bjdpjy Sv Dijfx Ap Aslh • DIMENSIONS: approx. 2000 x 2400 x h 7500 mm • Filter surface area: 120 m² • No. 108 filters type 2850 F.P. • Filter fabric: antistatic, 500 g • No. 108 cage supports with ABS venturi • Filter cleaning system: Pulse-Jet with control unit/sequencer • No. 01 perforated tube Ø 2” for internal fire suppression – 3 bar supply • No. 01 explosion relief panel, horizontal positioning in dedicated structure • No. 01 inspection door in hopper • No. 01 rotary valve • Conical hopper for gravity discharge of filtered dust • Structure support for clearance under rotary valve: 1500/1800 mm • Ladder with protection cage, upper safety handrail • Machine electrical control panel • No. 01 fan, either 18.5 kW or 22 kW Filtration machine for direct discharge into big-bags.

Condition: new, Year of construction: 2026, power: 55 kW (74.78 HP), pressing force: 1,250 t, stroke length: 510 mm, operating speed: 6 mm/s, reverse speed: 55 mm/s, throat depth: 810 mm, clearance between the columns: 7,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 1250 Ton 8.1 Meter CNC Press Brake – New / 12-Month Warranty Bledpfx Apoyzb Hno Aoh Press brake machines are heavy-duty industrial equipment used for the precise, repeatable, and controlled bending of large sheet metals. The 1250 Ton CNC Press Brake by CRONOSSTECH is specifically engineered for heavy steel construction, energy sector applications, and large-scale industrial projects, offering an impressive 8100 mm bending length and high tonnage capacity. Key Advantages - High-precision bending up to 8.1 meters - 1250 ton maximum bending force - Advanced automation with ESA S840W CNC control - Servo-motorized X+R axis precision backgauge - WILA motorized crowning system for uniform bending - Heavy-duty, high-strength frame construction Typical Applications - Heavy steel structures - Energy and infrastructure projects - Shipbuilding and shipyard industry - Defense and heavy machinery manufacturing - Large sheet metal bending operations Standard Features - ESA S840W CNC control unit (3–8 axis) - 15.6” touchscreen, 2D graphic, and offline programming software - Automatic bending sequence and collision prevention - Angle measurement and automatic crowning correction - Servo-motorized X + R axis backgauge system - High-precision linear guideways and ball screw system - 2 rear backgauge fingers (3-stage) - Promecam quick tool clamping system (E20) - Eurostamp standard punch and die set - D-Series full enclosure safety system - Double foot pedal control (up / down) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Parker pump - LED lighting and energy-saving mode - Heavy-duty front support arms - WILA motorized crowning system Technical Specifications - Bending Capacity: 1250 Tons - Bending Length: 8100 mm - Distance Between Uprights: 7100 mm - Stroke: 510 mm - Daylight Opening: 775 mm - Throat Depth: 810 mm - Table Height: 750 mm - Pit Depth: 2375 mm - Machine Dimensions (LxWxH): 10600 x 3650 x 4500 mm - Approach Speed: 70 mm/sec - Bending Speed: 6 mm/sec - Return Speed: 55 mm/sec - Oil Tank Capacity: 1000 L - Motor Power: 55 kW - Weight: 136,000 kg Optional Features - Advanced multi-axis backgauge systems (4–6–8 axes) - WILA hydraulic tool clamping systems - Hydraulic punch clamping for rollers - Extended table for Multi-Vee dies - 1000 mm X-axis stroke - AKAS / DSP laser safety systems - Additional backgauge fingers General Information - Country of Manufacture: Turkey - Warranty: 12 months - Condition: New and unused This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 320 t, stroke length: 310 mm, operating speed: 9 mm/s, reverse speed: 110 mm/s, throat depth: 410 mm, clearance between the columns: 5,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 320 Ton 6 Meter CNC Press Brake – HPB C320-6100 – New / 12 Month Warranty Press brakes are essential production equipment that provide high precision, repeatability, and manufacturing efficiency in sheet metal bending operations. The HPB C320-6100 CNC Press Brake, manufactured by CRONOSSTECH, has a 320 ton bending capacity and a 6100 mm bending length, developed for precise and stable processing of large-scale sheets. Key Advantages - High-precision bending over 6 meters length - Advanced programming with ESA S840 CNC control unit - High-precision servo motorized backgauge system - Homogeneous bending with WILA crowning system - Heavy-duty frame and high stability - European origin hydraulic and electrical components Applications - Large-scale sheet metal bending applications - Steel structure manufacturing - Energy and infrastructure projects - Machinery and equipment production - Industrial manufacturing lines Standard Features - ESA S840 (3-6 axis) CNC control unit - 15.6” touchscreen, 2D graphics, and offline software - Automatic bending sequence and collision control - Angle measurement and automatic angle correction (crowning) - CRONOSS X+R axis servo motorized backgauge (±0.03 mm accuracy) - Hardened linear guide and ball screw system - 2 adjustable backgauge fingers - Promecam quick tool clamping system - Eurostamp standard punch & die set - Full protective enclosure (full cover) - Dual pedal (up/down control) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic block, Eckerle pump - LED lighting, energy-saving mode - Front support arms (high-strength, adjustable) - Manual WILA crowning system Technical Specifications – HPB C320-6100 - Bending Capacity: 320 Ton - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - Stroke: 310 mm - Daylight: 535 mm - Throat Depth: 410 mm Bodjyzb Ewjpfx Ap Ajlh - Table Height: 1065 mm - Machine Dimensions (LxWxH): 8150 x 2655 x 3170 mm - Approach Speed: 150 mm/s - Bending Speed: 9 mm/s - Return Speed: 110 mm/s - Oil Tank: 290 L - Motor Power: 22 kW - Weight: 27,000 kg General Information - Place of Manufacture: Turkey - Warranty: 12 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 100 t, stroke length: 260 mm, operating speed: 10 mm/s, reverse speed: 135 mm/s, throat depth: 410 mm, clearance between the columns: 2,150 mm, Equipment: CE marking, documentation/manual, safety light barrier, 100 Ton 2.6 Metre CNC Press Brake – HPB B100-2600 – New / 12 Months Warranty Press brake machines are essential production equipment that provide high precision, repeatability, and production efficiency in sheet metal bending operations. Manufactured by CRONOSSTECH, the HPB B100-2600 CNC Press Brake, with a 100 ton bending capacity and 2600 mm bending length, is the ideal solution for medium-scale productions and precision bending applications. Key Advantages: - Compact and highly efficient design - ESA S830 CNC control unit - Servo-motorized precision backgauge system - Stable and rigid frame structure - Hydraulic and electrical components compliant with European standards Applications: - Sheet metal bending operations - Machinery manufacturing - Electrical panel production - Light and medium-scale metalworking - Workshop and serial production applications Standard Features: - ESA S830 (3-4 axis) CNC control unit - 10” touchscreen and 2D graphic programming - Manual bending sequence and collision control - Angular measurement and crowning correction system - CRONOSS servo-motorized X-axis backgauge (±0.03 mm accuracy) - Hardened linear guideways and ballscrew system - 2 backgauge fingers (manual Z axis) - Promecam quick tool clamping system - Eurostamp standard punch & die set - Open frame design (B Series) - Single pedal control system - GIVI linear scale (encoder) - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Eckerle pump - LED lighting and energy-saving mode - Adjustable front support arms Technical Specifications – HPB B100-2600: Bending Capacity: 100 Tons Bending Length: 2600 mm Distance Between Columns: 2150 mm Stroke: 260 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Height: 885 mm Bedpoyzb Hbsfx Ap Aslh Machine Dimensions (LxWxH): 4220 x 2230 x 2950 mm Approach Speed: 200 mm/s Bending Speed: 10 mm/s Return Speed: 135 mm/s Oil Tank: 170 L Motor Power: 7.5 kW Weight: 6430 kg General Information: Country of Manufacture: Turkey Warranty: 12 Months Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Blodpfsuca Amox Ap Ash

Condition: ready for operation (used), Year of construction: 2022, This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Pressing force: 175 tons / motor power: 185 kw / 400 v / bending speed: 10 mm/s / oil tank capacity: 200 liters • Cnc control: delem da-58t 2d graphic touch screen controller / controlled axes: y1, y2, x, and r axes with motor drive / motorized table preload for consistent bending angles Blodpfx Aex D Rphop Ajh • Frame: stress-relieved, massive, welded steel frame / upper beam guidance: massive four-fold guidance for optimal support • Tool clamping: manual upper tool clamping with promecam/amada system / tool set: includes "deerfoot" stamp and quadruple-opening lower tools for materials 1 mm to 8 mm thick • Safety system: fiessler safety lasers and plcs / lighting: energy-saving led in work area and rear / foot pedal: mobile foot control unit / front plate support arms: adjustable on linear guides for easier material handling

Condition: used, machine/vehicle number: LC596, Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labelerConveying/accumulation: MBF accumulation table (conveyor)Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizerCase handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserterAuxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scaleSelected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30)Certifications: CE markings on Mas Pack modulesAdvanced Automation & Control SystemsThe line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families.Adhesive labeling with 3-station control for front/back/neck labelsAutomated heat-shrink and polylaminate capsule applicationHotmelt application via PREO E0P051 4R2 unitsCE-compliant electrical panels on Mas Pack packaging modulesOperator-friendly HMI/controls at packaging stations (per module)Production Line Integration CapabilitiesDesigned for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy.Inline glass bottle processing from filtration to palletizingFo.. Bedpfx Apsyhbhqe Ajlh

Condition: new, Year of construction: 2026, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) Bledpfx Apjwd Emks Ash The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: used, This listing is for the Bio-Rad C1000 Touch Thermal Cycler. The unit is in full working condition and ready for immediate use. Compact and reliable PCR thermal cycler featuring touchscreen control, precise temperature performance, and flexible protocol programming for molecular biology, genomics, and laboratory research applications. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Bedpfx Aey Sf S Aop Aslh Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, Year of construction: 2026, The CORMAK H500SA automatic bandsaw is a technologically advanced double-column metal bandsaw designed for precise and efficient cutting of large steel components, tubes and profiles. With complete process automation, high cutting power and a durable structure, it performs perfectly in serial production and heavy-duty industrial operations. Main Advantages Automatic cutting cycle – the full cutting sequence from loading to arm return is performed without operator involvement. Hydraulic vice and material feed – ensuring fast, firm and precise clamping and feeding of the workpiece. High cutting capacity – suitable for materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning – automatically maintains optimal tension for stable cutting performance. Cooling system and powered cleaning brush – extend blade life and improve surface quality. Construction and Technology The machine is based on a heavy-duty cast-iron and steel structure providing high rigidity and minimising vibrations during operation. The double-column design of the H500SA ensures cutting precision and long-term durability. Equipped with a 7.1 kW main motor and an independent hydraulic system, it delivers reliable performance under continuous use. The frame is inclined at a 3° angle to the work surface for more effective cutting of profiles and sections. Bsdeyctwmepfx Ap Aslh The blade is guided by carbide-insert and roller bearings that ensure perfect blade tracking. The movable guide head automatically adjusts to the material width, enhancing stability and reducing blade wear. Precision and Productivity Hydraulically controlled arm feed with smooth pressure adjustment allows precise adaptation to the material being cut. The LCD control panel enables programming of the number and length of cut pieces, as well as real-time monitoring of cutting parameters. The machine automatically detects the end of material, faults, and operation status, ensuring uninterrupted production with maximum efficiency. Applications The CORMAK H500SA is an industrial metal bandsaw recommended for: Steel structure fabrication plants Serial production in metal workshops Cutting heavy steel pipes and profiles Large-scale steel processing and tool steel cutting operations Standard Equipment Full automatic cutting cycle Arm and vice position memory Hydraulic unit and feed system Hydraulic blade tensioning Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade CE Declaration of Conformity Technical Data Cutting range Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Blade tensioning Hydraulic Feeder stroke 500 mm Load capacity 3 t Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2400 kg

Condition: used, maximum load weight: 31,240 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 03/2027, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: ABS, LANGENDORF/ FTS 3-Axle Aluminium Tipper "Combiliner" First registration 03/2023, single owner Mileage only 114,761 km The transport solution for intermodal haulage of both liquid and solid goods without conversion. The module can be removed at any time. System advantages: Avoids empty runs through swap operations. For seasonal transports, can be converted to a pure tipper for higher payload. Economical and ecological benefits. Module installed in the tailgate, tipper usable without restrictions. Rinse function. The vehicle complies with QS and GMP+ guidelines, certified by TÜV Süd. Unladen weight approx.: 7,760 kg Tipper volume 47.5 cbm Slurry bag volume 26.5 cbm Pneumatic vibrator Grain outlet in the floor, grain channel with dust protection sack Aluminium water tank 50 L with compressed air connection, hose reel, and shower head (as required by QS and GMP) SAF axles in reinforced "CD" version, with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with rollover stability support (RSS) WABCO Optiturn for reduced turning radius WABCO Smartboard with axle load display Six 385/65 R 22.5 tyres Bodpfx Apsy Iq Inj Aolh SPEEDLINE high-gloss aluminium rims FTS Combiliner module equipment: Vogelsang rotary lobe pump GL 186-184Q, weight-optimised Spade slide valves 4-inch and 6-inch Operation via remote control and programmable sequences Manual control unit on top for all hydraulic functions 2-tank venting/degassing and overflow Rinse function via two flange connections (left/right rinsing) Rinse baffles in the wire baskets Electric motor-driven winding reel with hydraulic brake RENTING is the new BUYING—immediately available from us, also as a FULL-SERVICE RENTAL-----

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Blodovmwxxopfx Ap Ash Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Bedpfx Apow Naabo Aolh Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: excellent (used), Catalogue number 7977 TECHNICAL DATA - Range of processed dowel diameters: 40-140mm - Max diameter of input material: 240mm - Min length of input material: 600mm - Max stock removal per side: 30mm - Installed bushing diameter: 100mm - Cutter head drive motor: 18.5kW - Stepless feed speed adjustment + forward/reverse - Feed motor: 1.5kW In sequence: - infeed trough - 6 toothed feed rollers - 4-knife head - 6 smooth outfeed feed rollers - extraction port diameter: 220mm - dimensions L/W/H: 2660x1350x1400mm - weight: 1650kg ADVANTAGES – Polish production – DTR documentation – Used dowel lathe, in very good condition Net price: 49,900 PLN Blsdpfx Apoy Iffbj Ash Net price: 11,880 EUR (at 4.2 EUR rate) (Prices may change subject to exchange rate fluctuations)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Bsdsy Rmdwjpfx Ap Ajlh Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Bodsw Imp Hjpfx Ap Aolh Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. Bledjx Uwlajpfx Ap Aoh 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: ready for operation (used), Year of construction: 2010, overall weight: 23,000 kg, punching force: 31 t, controller manufacturer: SIEMENS, sheet thickness (max.): 6 mm, number of axes: 11, This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details. • Max. punching diameter: approx. 88.9 mm (in 3 mm steel) • Punching speed: up to 600 hpm (short pitch) • Positioning accuracy: ±0.1 mm • Max. sheet size: 1500 x 2500 mm • Automatic repositioning: yes, via CNC clamps Bljdpfoy H Ilusx Ap Aoh • Number of clamps: 2 (with intelligent repositioning) • Loading/unloading capability: manual or automatic (configuration dependent) • Turret: Thick Turret / Trumpf style • Number of stations: 20 • Integrated shear: CNC right-angle shear • Shearing capacity: up to 6 mm (mild steel) • Process advantage: part separation without micro-joints or secondary operations • Edge quality: superior to traditional nibbling • Control unit: Finn-Power / Siemens • Software: NC Express / Tulus • Functions: automatic nesting; optimized punching and shearing sequences • Diagnostics: self-diagnostics and assisted maintenance

Condition: ready for operation (used), Year of construction: 2016, Edgebander manufactured in 2016. This HOMAG KAL 370 features a continuously adjustable feed speed of 18-20 m/min and accommodates workpiece thicknesses from 8 to 60 mm. It includes advanced gluing and trimming units, as well as a comprehensive software package for efficient operation. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KAL 370 machine we have for sale. Contact us for further details. • Feed speed: Continuously adjustable 18–20 m/min • Fixed stop side: Left • Workpiece thickness: 8–60 mm • Workpiece overhang: 30 mm • Throughput equipment: Pre-installation for Boomerang TFU140 • Feed lock: Available • Feature packages: Future-Paket 5; Foil/High-Gloss Package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller track; Infeed barrier • Workpiece transport: Transport device; Top pressure • Cleaning/Prep: Release agent spraying unit (top/bottom) • Jointing/Milling: Joint trimming unit; I-System-DIA jointing cutter set WD60; Workpiece pre-heating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure tank for PU application unit • Magazine/Pressure: Edge magazine; Pressure zone • Spraying: Lubricant spraying unit (top, bottom, side) • Trimming/Milling: Snipping unit HL81 (bevel/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Form milling unit FK11 • Tooling/Changeover: I-Exchange head system (automatically adjustable/FK); I-DIA radius cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multi-profile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint scraper FA20 BASIC; Automated scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/Software: Software package WoodCommander; Antenna sequence control; Machine data acquisition and evaluation; Error diagnosis; Teleservicenet-soft • System/Networking: Emergency stop interlock; Network connection (Ethernet); Manual control for setup mode; Language: German • Documentation: On data carrier and paper Bsdjy Hrtpopfx Ap Aslh Additional equipment • Boomerang return system TFU140/20/08-Optimat • Workpiece detection (sensor-based) • Basic outfeed return line • CE for cells (systems)

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and Blsdpjy Hixvefx Ap Aoh roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Year of construction: 2009, condition: ready for operation (used), A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible. Bedpfx Aey Nna Dop Aolh

Year of construction: 2023, condition: ready for operation (used), total width: 1,800 mm, total height: 2,700 mm, pressing force: 143 t, product length (max.): 4,000 mm, Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details. • Type: CNC hydraulic press brake • Working length: 3,100 mm • Max bending thickness: 6 mm at 3 meters • Distance between uprights: 2,550 mm • Throat depth: 400 mm • Daylight opening: 515 mm • Punch stroke: 250 mm • Table width: 80 mm • Fast approach speed: 0–180 mm/s • Working speed: 0–20 mm/s • Return/upstroke speed: 0–160 mm/s • Max hydraulic pressure: 275 bar Bedoy E I Adepfx Ap Aolh • Main electric motor power: 15 kW • CNC control: CybTouch 15 PS (15" touchscreen, 2D programming, automatic bend sequence detection) • Axis configuration: Rear gauge with 2 controlled axes (X + R) Additional equipment • Two heavy-duty front support arms • Front guides movable longitudinally • Adjustable-height front supports • Laser safety system AKAS-LC • EU-compliant operator safety system • Pneumatic folding/hemming table • Mechanical grip for lower tools • Tooling included: • Punch: Knife P120.35.R08, height 120 mm, angle 35°, radius R0.8, sections 3 x 835 mm + 1 x 805 mm • Bottom die/block: Model M460.R, V openings 16/22/35/50 mm, sections 3 x 835 mm + 1 x 805 mm, suitable up to 6 mm sheet metal

Condition: ready for operation (used), Year of construction: 2000, operating hours: 23,574 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 8,000 rpm, The following machine components have been renewed: - Motor & pump of the hydraulic system - Hydraulic and pneumatic hoses (partially) - Control cabinet LT module replaced - Drum of the Knoll system TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 560 mm Travel distance Z-axis: 560 mm B-axis: 360 x 0.001° (60 rpm) Spindle speed: 8,000 rpm Bjdpfxjy Nbuno Ap Aolh Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Working feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS CNC control model: Siemens Sinumerik 840D Total length: 7,000 mm Total width: 5,000 mm Coolant supply: 50 bar Coolant system capacity: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Total power requirement: 20 kW Dimensions & Weight Space requirement (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating hours Power-on time: approx. 48,804 h Spindle operating hours: total 23,574 h EQUIPMENT - Documentation/Manual - Steplessly adjustable spindle speed - Chip conveyor - Knoll cooling unit with drum filter (30/40/50 bar via M-command) - Tool measurement: Renishaw probe - Tool breakage monitoring in the working area - Pallet storage (4 positions) - Pallet sequence operation - Fully enclosed work area in accordance with UVV - Network capability - Technical documents & layout plan