Used Dmc104V Linear for sale (2,355)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg Cjdpey Emufjfx Ak Esgt tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 29110004034, functionality: fully functional, operating hours: 9,442 h, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 30, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Control: Siemens 810D Powerline Table surface: 1,250 x 600 mm X-axis travel: 1,040 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle & tool holder Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Spindle drive: 13 kW / 19 kW (100% / 40% ED) Tool changer: 30 positions MACHINE DETAILS Spindle hours: 9,442 h On-time: 32,189 h EQUIPMENT - Linear drive in the X-axis for more precise movements - Bed flushing to clean the work area Cedewa Tmwspfx Ak Eogt - Spiral chip conveyor for efficient chip disposal - Direct position measuring system for precise Position determination - Temperature compensation of the Z-axis via temperature sensor with active cooling unit - Blown air from outside via two pipes for chip removal

Condition: ready for operation (used), Year of construction: 2002, operating hours: 38,040 h, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS CNC Control: Heidenhain iTNC530 X-axis: 1,040 mm Y-axis: 600 mm Z-axis: 500 mm Linear drive: On the X-axis Worktable Dimensions: 1,250 mm x 600 mm Max. workpiece weight: 800 kg Spindle Spindle operating hours: 38,040 h Spindle speed: 12,000 rpm Tool System Taper type: SK-40 Tool magazine capacity: 30 Tool diameter: 100 mm Max. tool diameter with empty neighboring pockets: 140 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Length: 3,750 mm Width: 2,340 mm Height: 3,164 mm Weight: 8,900 kg EQUIPMENT - Direct measurement system - Blum tool laser measurement for tool length and diameter - Chip conveyor - Bed flushing - Electronic handwheel Cgodsxal Rxopfx Ak Est

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Cgodpfst I Di Asx Ak Ejt Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: good (used), Year of construction: 2003, Maho DMC 104 V, year of manufacture 2003, Heidenhain iTNC 530 control, travel X/Y/Z 1040/600/500 mm, 30-position tool changer, SK 40 spindle taper, high-pressure internal coolant 20 bar, direct measuring systems, belt filter, chip conveyor, 3D touch probe, X-axis bellows replaced. Cgsdpfxjw Dy S Ij Ak Ejt

Condition: new, For sale: Professional MITUTOYO measuring set, manufactured by the renowned Japanese precision measurement systems company. 📦 Set includes: - MITUTOYO AT103 measuring scale - Mitutoyo module / transducer (Part No. 09AAA198) - Signal cables - Flexible cable in metal sheath - Documentation, manuals - Original packaging ⚙️ Data / Information: - Manufacturer: MITUTOYO (Japan) - Model: AT103 - Application: CNC machines, automation, measuring systems - High measurement accuracy - Professional industrial-grade equipment 🛠️ Condition: - NEW – old stock (NOS) - Unused, stored in warehouse - Packaging may show signs of transport/storage 💎 Advantages: - Original Mitutoyo product – top quality Cgjdpjy Agbmefx Ak Eot - Complete set ready for installation - Ideal for CNC machinery / automation - Very high precision and durability - Industrial equipment – not a retail-market item 📌 Additional Information: - Sold exactly as shown in the photos - Worldwide shipping available

Condition: used, functionality: fully functional, Koganei ORGA40X2750 Linear actuator. Good working condition. Please check out our other listings as well. Csdpfxjtwqqgo Ak Ejgt

Condition: used, functionality: fully functional, Hoerbiger Origa P120S-25 Linear actuator. Good working condition. Please check out our other listings as well. Cjdstwqp Ajpfx Ak Eogt

Condition: good (used), A good used linear weigher with Digiway controls - this machine is a single head weigher with 4 vibratory feed trays - loadcell technology and Digiway controls for fast accurate weighing and filling or granular free flowing products. Cjdpfx Asu U Ai Hek Eogt

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, Equipment: bar feeder, chip conveyor, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Maximum power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Cgjdpfjy Dr S Hsx Ak Ejt Linear axis Z1 / X1 / Z1 – Rapid traverse (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Nominal force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Rapid traverse (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS Control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on hours: 85,620 h Operating hours: 27,896 h EQUIPMENT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Central lubrication - Hand-held control unit - Documentation available

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,585 mm, turning diameter: 300 mm, controller model: Siemens 840D Powerline, number of slots in tool magazine: 120, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 1,585 mm Turning diameter: 300 mm Tool magazine capacity: 120 positions MACHINE DETAILS Control: Siemens 840D Powerline EQUIPMENT Sub spindle Cgodpfx Ajy Dqtiek Est C-axis Hollow clamping device (diameter 68 mm) on main spindle, left Measuring device with probe Oil mist separator

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Cedey Nbbzepfx Ak Eogt Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Tool change time: 9.6 s The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Cgsdsu Hkb Ropfx Ak Eet Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment Cedoymcvmepfx Ak Esgt • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: 0372PO183, Model: JSO-IV-40-22TF Year: 2006 Serial number: 0372PO183 Stock number: 1180G Belt width: 40 inch, 1010 mm Heating: thermal oil, 2 x 460kW Steam: max 2 x 545 kg/hr Cjdsy Icgijpfx Ak Eogt Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm Automated cleaning in place (CIP): Continuous hot water, single pass, belt washer with Stein Humitroll moisture monitoring and control.

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Cgjdpfx Akoya Ahve Eet

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Cedpoyazywjfx Ak Eegt Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Condition: new, Year of construction: 2019, x-axis S400 mm y-axis S800 mm z-axis S1800 mm control SELOGICA (AMS) weight of the machine ca. 350 kg dimensions of the machine ca. 2,50x1,50x2,50 m ARBURG MULTILIFT SELECT 6 kg – Linear Robot System (Transverse Version) Codpfx Akjywzvze Eegt General Specifications - Manufacturer: ARBURG - Model: MULTILIFT SELECT 6 kg transverse - Year of manufacture: Net weight: approx. 350 kg Performance & Load Capacity - Maximum payload: 6 kg Control & Pneumatics - Control system: SELOGICA - Pneumatic operating pressure: 0.6 MPa - Axis configuration - Rotation axes A/B/C: - / 180° / 90° Travel ranges: - X-axis: 400 mm - Y-axis: 800 mm - Z-axis: 1800 mm Machine type - Linear robot for injection molding automation - Cross-axis removal system

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. Codpfx Akov Ehawj Ejgt - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,607 h, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details. Cjdpfx Aoyu Sc Sek Ejgt • Spindle hours: 12,600 • Tool positions: 30 • Control: iTNC 530 • Clamping surface: 1250 mm x 600 mm • Transport weight: approx. 9.5 t • Control: iTNC 530 Additional equipment • 4th axis: Lehmann EA-420 Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Cgodpfx Akjy Htq Ae Eot Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho Machining Center 5-Axis Simultaneous Machining Model DMU 50 Evo Linear Year 2005 CNC Heidenhain iTNC 530 Cgjdpfx Akey Hqvio Est

Condition: good (used), Year of construction: 2005, operating hours: 15,742 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 18,000 rpm, DMC 64V linear / Year of manufacture 2005 Heidenhain control 530 3-axis machining center 30-position tool changer Travel: X640mm (linear drive) Y600mm Z520mm Spindle: SK40 Max. speed: 18000 rpm Max. feed rate: 40000mm/min Cjdpfx Akjy Iw H Rs Esgt

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun Cgodpfxjyi Dnio Ak Eot blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 885 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, rotary table diameter: 750 mm, spindle speed (max.): 18,000 rpm, spindle nose: HSK63, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, Machine Description: 5-axis machining center with extensive equipment and linear drives on all axes. Well-maintained and fully operational. Current run times: Program ON: 27,011 h / Machine ON: 57,198 h / Spindle ON: 24,324 h Travel Paths and Speeds: X-axis (longitudinal): 885 mm Y-axis (cross): 600 mm Z-axis (vertical): 600 mm Feed rate on all axes: 90,000 mm/min Clamping Table / NC Rotary Table: NC rotary table diameter: 750 mm Table load capacity: 800 kg Control: Heidenhain iTNC530 with electronic handwheel Spindle and B-Axis: Speed range: 50 – 18,000 rpm Tool holder: HSK63 Spindle power: 35 kW (S1) Cgsdpfx Akoy Hix Ns Est Torque: 80 Nm (S4) NC-controlled B-axis: +110° / -10° Coolant System and Chip Disposal: External coolant with nozzles: 4 bar Internal coolant: 40 bar External air: yes Internal air: yes Paper band filter: yes Chip conveyor: yes Automatic Tool Changer: Tool holder: HSK63 Number of positions: 60 Machine Weight: Weight: approx. 10,900 kg Additional Equipment and Accessories: Heidenhain direct measuring system with air purge on all axes iR probe by M&H Tool measurement with Blum laser Chip flushing gun Work area rinse system Machine documentation