Used Genome Sequencer for sale (348)

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Kfodpfx Afsw Ec Riofsa Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: used, 7 pieces for sale! Condition: Used, dismantled from decommissioned equipment. Untested. The item shows normal signs of use. Technical Data: Manufacturer: ABB Model/Type: VD4 36.12.32 Serial No.: 1VC1BF00013886 Year of Manufacture: 2015 Classification: M2 Kfedpfoxq Nvyjx Affea Standards: IEC 62271-100 / CEI 17-1 Weight: 170 kg Rated Voltage (Ur): 36 kV Rated Lightning Impulse Withstand Voltage (Up): 170 kV Rated Short-Duration Power-Frequency Withstand Voltage (Ud): 70 kV Frequency: 50 Hz Rated Normal Current (Ir): 1250 A Rated Short-Time Withstand Current (Ik): 31.5 kA Rated Short-Circuit Duration: 3 s Rated Short-Circuit Breaking Current (Isc): 31.5 kA Rated Short-Circuit Making Current (Is): 79 kA DC Component at ≤30% Voltage: 50 A Operating Sequence: O–0.3s–CO–3min–CO Wiring Diagram: 1VCD400236 Drive Supply Voltage: 220 V (EL3, MBC, MBO1, MBU, MAS) Origin: ABB, Italy

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm Kedpfexabi Rex Affjfa total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series Kfodpexqxw Tsfx Affsa - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: good (used), Year of construction: 2006, Ref:10979 . 2006 Heidelberg Stahl TH82/64K-RFH 16pp High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. Kfsdpfxowxw Sne Affsa • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SBP.D presser/stacker delivery unit. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit (to be confirmed). VFZ mobile electronic ‘Z’ knife 32 page fold unit. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 56cm with 4 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: refurbished (used), Diosna W160 AF/T wendel mixer with 5 bowls 160kg dough 2 speed frequency controlled Kfedewgctaopfx Affoa original Diosna digital control panel temperature measurement scraper gear drive shorter kneading time fast dough sequence lower dough heating suitable for all types of dough, thanks to the gentle kneading capacity in flour 100kg bowl contents 260 liter tool drive 8.5/15 KW tub drive 1.1 KW hydraulic drive 0.75 KW

Condition: used, Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Kodpfxsxpiw Ue Affjfa Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: excellent (used), Year of construction: 2024, operating hours: 650 h, Edge Banding Machine with PLC control system (incl. 15“ touch screen) and glue application to the workpiece for edge band material up to 3 mm: pre-milling (DIA-tools incl.) up to max. 3 mm milling depth, maintenance-free and coated quick heating pot with preliminary setup for change over quick heating pot (incl. hot-melt glue changing device), HF-trim saw station (approx. 12,000 rpm),HF-milling station (approx. 12,000 rpm) with pneum. milling adjustment, 2nd HF-milling station (approx. 12,000 rpm, incl. pneum. disengagement), corner rounding unit1), radius profile scraper, surface scraper (incl. pneum. disengagement), cleaning station, groove saw (incl. pneum. disengagement), robust chain drive, double roller top pressure (ball bearing supported), windows for aggregates from machine back side and operator side, indicating lamp for workpiece sequence, extensible support bar to the front, band feed approx. 15 m/min, gluing up to 60 mm workpiece thickness. Optional things installed on the machine Kedpfx Aoxn Nvbjffsfa Quick change device for corner rounding Multi-Radiusscraper (R2/R1) Heatable infeed fence Wheels Release agent spraying unit (spraying workpiece) Cleaning agent spraying unit (spraying workpiece) Protection spraying edge Nesting Pneumatic 3-point adjustment Multiool for HF-milling station Airtronic (up tp 40 mm workpiece thickness) Axis package (motor driven adjustments of height, edge and premilling) Glue pot suction hood The machine is on stock!

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Equipment: scorer, Striebig Control18 6224 Cutting range: 6224 L: 5300 x Hvert: 2240 / Hhor: 2100 x D: 80 mm Saw frame - Production of the machine in the precision parts to 1/100 mm - Solid, self-supporting, firmly welded, torsion-resistant saw frame - TRK1 full-surface support wall made of birch plywood with integrated small parts support - Auxiliary fence profile with its own measuring tape and 3 auxiliary fences for repeat cuts - Automatic detection of the center support - Automatic roller blocking during the saw cut Saw beam - Sturdy, durable steel saw beam construction - Automatic saw beam locking with interface detection Saw unit - Backlash-free, smooth-running guides - Robust bearing of the motor carriage ensures high cutting precision - Powerful, high-torque 5.5 kW motor (7.5 hp) - More convenience thanks to largely automated operation - Laser-supported display of the horizontal cut - Automatic motorized carriage clamping - Automatic plunging and tilting of the saw motor - Pneumatic clutch for easy changeover to manual operation - SUPERSILENT sound insulation to reduce saw blade noise - Electromagnetic motor brake - ProLock Easy-Fix tool clamping system Control system - 12" touchscreen computer with optimum operator guidance - Multilingual operator guidance - Tool database guarantees high flexibility and absolute repeat accuracy - Fully automatic sawing sequence - Infinitely variable feed speeds 10-25 m/min - Selectable sawing cycle - End of panel detection - Constant return speed - Operating hours counter Kfodpfxju Nhbys Affja - Network connection - UPS 24VDC for touch PC (uninterruptible power supply) - Automatic saw beam positioning ASP Ground adjustment - Digital measuring system DMS.x (horizontal axis for vertical cuts) - Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, ergonomics - STRIEBIG typical product design - Multiple awards (including the Swiss Design Award) - Functional and user-friendly ergonomics Mounting - Wall or free-standing installation possible - VSA scoring saw unit (infinitely adjustable scoring saw) - Paper holder - Small parts support, aluminum compl. (2-part) - Striebig cutting optimization STRIEBIG ExpertCut CON

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC Ksdjxqxt Ijpfx Affofa - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: used, Year of construction: 2004, Ref:10906 . 2004 Herzog + Heymann M7 Multiple Folder. A very versatile folding machine in excellent condition. It is not only a high speed automatic B1 buckle folder for standard section and leaflet work, but also a specialist folder capable of folding maps, multiple roll folding and concertina folding. Comprising; MBO R700 'Perfection Dualfeed' round pile continuous feeder ‘Vacu-Infeed’ for mark free and smooth sheet running ‘Vacu-Alignment’ adjustable vacuum in tape roller infeed of register table Features include:- • MBO MCC Total and batch counter • Stainless steel buckle plates • Sound hoods • Frequency controlled A.C. drive motor & dual action compressor • MBO ASP 66-2 ME Presser/marker delivery unit • Complete with spares, tools & manuals. Folding sequence: 1st buckle unit - 72cm with 16 plates, perforating/scoring shafts Specification: Sheet size, Max: 72 x 104 cm (continuous feeder) Min: 15 x 20 cm Minimum fold length: 4.2 cm Speed range : 40 - 160 m/min. Kfedpfx Afsw Eu Igefea

Condition: refurbished (used), Diosna W 120 A wendel mixer with 2 bowls 120kg dough 2 speed frequency controlled Kfodpfx Ajwfp Eaeffsa digital control panel shorter kneading time fast dough sequence lower dough heating suitable for all types of dough, thanks to the gentle kneading capacity in flour 75kg bowl contents 190 liter

Condition: new, Year of construction: 2025, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: Ksdpjvzt D Tsfx Affefa - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: used, mileage: 7,887 km, power: 382 kW (519.37 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, Full and emergency braking assistant, ACC Stop&Go, lane departure warning, turn assist, LED: rear, daytime running, outline, indicator, and all-round warning lights, work lights, reverse warning device, steel rear bumper, reversing camera, airbag, multifunction steering wheel, MAN Easy-Control, sun visor, air pressure gun, 7" media system, hydraulic internal locking, semi-moon shaped rear tipper frame lock, galvanized perforated sheet mesh basket, hydraulically adjustable underride guard (semi-automatic), automatic sequence control (AUSC), for container internal dimensions 5,000 to 6,750 mm, 2 LED work lights at end of frame, engine-side PTO (power take-off). Kfodsxa Szdopfx Affja

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Concept 70 Eco body press Year of manufacture 2025 including the following options: - Rapid traverse speed adjustment speed up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers. Brief introduction: • With tried and tested tolerance compensation (GANNOMAT system) • 2 potentiometers for continuously adjustable pressing force Ksdpfx Afjvxgrrjfsfa • Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds 5/10/25 mm/sec. (with fine positioning / creep speed) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simple operation via LCD display Universal application area: • Bodies e.g. for furniture and cabinets • Mitered bodies • Bodies with protruding lids • Drawers • Pressing several bodies / drawers Advantages: • Tried and tested tolerance compensation (GANNOMAT system) • Electromechanical body press with frequency-controlled gear motors • Independent vertical and horizontal press beam • Long service life thanks to tried and tested, high-quality components • Solid and robust construction • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple thanks to simple and practical control panel • Fast thanks to press beam positioning speed of up to 50 mm/sec (option) • Efficient thanks to precise pressing of a wide variety of body sizes • Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds • Precise through precise angle pressing of furniture bodies and drawers • Professional production of bodies and drawers using modern body presses

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. Kfjdpfx Afevzr Nbofsa The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: good (used), functionality: fully functional, used 3D coordinate measuring machine Mitutoyo Euro C Apex 544 Kodpfsuyiu Njx Affsfa On our marketplace, we offer a pre-owned Mitutoyo Euro C Apex 544 3D coordinate measuring machine that retains impressive reliability and measurement accuracy despite its older age. This machine has been extensively inspected and tested by our experts to ensure that it still meets the high standards of metrology. The Euro C Apex 544's precise measurements, robust construction and durable components make it an excellent choice for quality control in manufacturing today. It has been thoroughly calibrated and tested by us so that it is ready for use in your production. Technical data: Measuring range: X = 500 mm, Y = 400 mm, Z = 400 mm Manufacturer accuracy: ±2.9 µm + 0.3L/100 µm Drive: CNC-controlled, with fully automated measuring sequences Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Proven reliability: this used machine has been thoroughly inspected, tested and calibrated by our metrology specialists to ensure continued precise performance. Stable precision: Thanks to its granite construction and proven Mitutoyo design, the machine delivers highly accurate and repeatable measurements even after years of use. Automation and efficiency: The CNC control and Renishaw TP200 touch probe enable fully automated, efficient measurements, optimizing your production processes. Reliable investment: Even as a used machine, the Mitutoyo Euro C Apex 544 offers a cost-effective solution for companies looking for a tried and tested 3D coordinate measuring machine. This machine is the perfect choice for companies looking for a proven and tested quality control solution. Despite its age, it has been extensively tested and calibrated to ensure maximum reliability and precision in your production.

Condition: good (used), 1. Bargstedt Single-Sided Loading Station TBF20/ER/25/08/S Conveying direction: left Fixed stack edge: left front From floor: 280 mm From floor: 1850 mm Ksdpfxsxmd Hrs Affofa Stack stability: 1570 mm Stack arrangement: single-lane or double-lane Stacks in sequence: 1 – 4 stacks Protective sheet dimensions: Lengths: 600 – 2300 mm Widths: 300 – 850 mm Thickness: constant 16 mm Stack change: manual 2. Bargstedt TDK 10 / 25 / 10 Rotating Station for Longitudinal to Cross Transfer

Condition: used, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja_yes boring of olive 1=yes, 0=no 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill hole position and depth set to the specified fitting type, can be adjusted via a stop system when changing types - Drilling feed speed can be variably regulated via throttle valve - Direct extraction - Electro-pneumatic control system with automatic Program sequence for - Fixing workpieces - Drill motor on - Drilling unit forwards - Drilling - Drilling unit backwards - Drill motor off - Releasing workpiece fixation - Fixed stop systems Basic equipment / Technical data: Sturdy base frame as a support wall, precise support made of abrasion-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick, Corner bearing and olive drilling in one machine and in one drilling unit, simple and convenient, vertical work, easy handling, no templates, minimal time required for the safe workpiece positioning, guarantee for exact and precise drilling, 2 clamping cylinders for immovable fixation of sash or frame, adjustable to different wood thicknesses, side stop in the rebate for the corner bearings, ergonomically arranged stop system for olive drilling with 14 swiveling stops and additional color markings, fixed stop system for drill hole height determination when changing from corner bearing to olive, automatic drilling depth sensing for corner bearing and olive, drill unit with quick-change chuck for the various tools for corner bearing and olive, tool change in "no time", automatic program sequence, clean work thanks to effective suction, small space requirement and mobile thanks to steering/brake rollers. Electrical equipment in accordance with VDE. Electrical connection: 0.55 KW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4 - 8 bar Extraction connection nozzle: 1 x 100 mm diameter Ksdpfovu Hgzox Affofa Extraction speed: 25 m/sec. Space required: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Paint finish: RAL 7030 stone grey with RAL 1018 zinc yellow 1 drill set with 1 drill 25 mm and 2 drills 10 mm plus 1 drill 34 mm diameter (technical data according to manufacturer - no guarantee!)

Condition: used, Year of construction: 2008,   Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation. Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray wrap with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container infeed system (to be provided by the line) Year of manufacture: 2008; Overhauled: 2022 Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Package configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability). Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application. Kedpfx Afoxdnbzefefa Integrated diagnostics, alarm history and counters (shift/lot totals). Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status. Electrical protection degree: IP54 for the electrical system and motors. Line Integration Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies alignment with fillers, labellers and downstream conveying. Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration. Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering). Condition & Maintenance Overall status: Ready for operation. Overhaul completed in 2022 to restore full functionality.

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The Kodpfow N S E Asx Affofa measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long Kfsdpfxogvu Alo Affea - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder Kodpfjlf Tu Uox Affsfa mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,818 h, machine/vehicle number: 24698, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem DA-66T CNC CONTROL UNIT, bending force (max.): 200 t, working width: 4,000 mm, throat depth: 410 mm, oil tank capacity: 55 l, overall weight: 12,500 kg, power: 18.5 kW (25.15 HP), input voltage: 415 V, Equipment: documentation/manual, emergency stop, lower tooling, upper tooling, CNC Press brake Baykal APHS 41200 10/27 in excellent condition listed for sale! Year of production is 2017. Press brake comes with variety of prisms and tools, which can be seen in pictures. Specifications: Control Unit DELEM DA66T CNC Nominal Pressure 200t Length of Work Table 4100mm Distance Between Columns 3550mm Throat Depth 410mm Maximum Open Height 530mm Ram Stroke 260mm No. of machine Axis:5 Safety Guarding System Laser System Type Backgauge Travel 750mm Motor Power 18.5 / 24.6 kW / hp Motor Voltage 415V Nett Weight 12,500kg -The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today’s press brakes. Ease of use combined with state-of-the-art technology go hand in hand, improving productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application. The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling. Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever. -Baykal machine frames are manufactured from hot rolled steel sheets of Fe 520. The two side frames are obtained from the same sheet to ensure the same elasticity under stress. The ram and table are also manufactured from Fe 520 steel and are designed to avoid deflection. -The hydraulic cylinders are manufactured from high resistance steel chromium plated & ground to size. Cylinder pistons are lapped to ensure longevity of the hydraulic seals -The hydraulic unit consists of electronically controlled proportional valves with independent closed loop control of the two cylinders providing full synchronous control. -German manufactured Laser Safety Guard System mounted at each end of machine ensuring correct interfacing and operator safety whilst in operation. The Laser system is designed so each guard will slide up or down to allow for many different types and sizes of tooling enabling safety at the appropriate points as required by the Australian standards. Manual height adjustment with scales and lock for easy positioning. Kfsdpsxl Ddhjfx Affsa -Sliding front sheet supports enable a wide range of material sizes to be aligned and supported at the correct required width and height. The sheet supports are mounted on precision linear guides for ease of movement. This design can also be adjusted vertically to support material with return bends. -Ram positions (Left & Right) are obtained from independent linear encoders whilst monitoring and adjusting proportional valves. This produces a closed loop system, with guaranteed beam positioning of +/- 0.01mm (Y1 and Y2 Axis) -Accuracy is further ensured by mounting the linear encoders on a C-frame connected directly to the Bed, rather than the side frames. This ensures that deflection of the side frames and uneven loads have no effect on Beam position.

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and Ksdpfjul Efmsx Affjfa test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data