Used Gate Fold Buckle Plates for sale (15,107)

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Ppsdpfx Ahoyvp E Iovep Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Condition: used, Year of construction: 2003, Manufacturer: Pester Pac Automation Model: Pewo-fold 1 Year: 2003 Type: Cellophane wrapping machine Film type: OPP Film width: 90–300 mm Psdpfx Aox R D Dhehvjpp Film thickness: 0.020–0.050 mm Max. roll diameter: 350 mm. Max. capacity: 50 strokes/min Format (min): 60 mm x 30 mm x 60 mm Format (max):250 mm x 250 mm x 140 mm Formats: 2x2 = 90 x 100 x 54: capacity: 50 cycles/min 2x3 = 90 x 150 x 54: capacity: 35 cycles/min 2x4 = 90 x 200 x 81: capacity: 18 cycles/min Power supply: 4 x 400 V + N + PE / 50-60 Hz Installed power: 4 kW (6 A) Air pressure: min. 4 bar / max. 10 bar Documentation available

Condition: new, Year of construction: 2024, neu 2024 9740 prompt, Zwischenverkauf v Türkei 6200 € Pedpfx Ajwiqnwohvepp 119.66 € 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: used, 3-roll plate bending machine Manufacturer: Luna Model: 8266 20/25 Machine No.: 2202 Ppodpeyw S N Sofx Ahvep Working range: 2000 x 2.5 mm sheet thickness Swing-out top roll Power supply: 3-phase, 16 amps

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, control type: PLC-controlled, 3-roll plate bending machine Manufacturer: FERRO S.R.L. Model: CIT - 1 Pedpfeyw S E Hjx Ahvjpp Working range: 2000 x 6 mm Hydraulic swing-out bearing for workpiece change Operator control panel Emergency stop via pull-cord

Condition: ready for operation (used), functionality: fully functional, 2500 mm roll length diameter approx. 280 mm Pjdpfx Asyw Sg Rjhvjpp

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Psdpfjgbfaxsx Ahvjpp Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Psdpov Ipl Tofx Ahvopp Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams.

Condition: like new (used), functionality: fully functional, Equipment: compressor, MORGANA Digifold Pro By combining creasing and folding in a single unit, the Digifold Pro becomes a highly productive, user-friendly, and mobile finishing center. Perforating is also possible, further expanding its application range. With speeds of up to 6,000 sheets/hour and a maximum format of up to 900 x 358 mm, the new Digifold Pro offers even greater flexibility. A large touch-screen display makes operating the Digifold Pro and all other Pro Generation machines easier. Versatility The Digifold Pro can be used in three different modes as required: - As a creasing machine - As a folding machine - As an integrated creasing and folding machine, performing both functions in a single pass. Feeder: suction feeder draws paper from below Paper format: max. 900 x 358 mm // min. 210 x 140 mm Paper weight: max. 400 gsm // min. 100 gsm Number of creases per sheet: 9 Max. number of folds per sheet: 2 Number of program memory slots: over 1,000 Min. distance between two creases: 40 mm Min. distance between two folds: 70 mm Min. crease distance from leading edge: 50 mm Min. fold distance from leading edge: 50 mm Min. crease distance from trailing edge: 50 mm Min. fold distance from trailing edge: 50 mm Fold length: 70 mm; Max. fold length up to 450 mm (automatic feed), up to 1,800 mm (manual feed) Fine adjustment: 0.1 mm increments Max. speed (A4): 6,000 sheets/hour Dimensions (L x W x H): 1,980 x 655 x 1,265 mm Weight: 190 kg Power supply: 230 V Shipping at buyer’s expense. 3-month bring-in warranty. All our offers are for used machines, which may show signs of use (minor scratches or yellowing). Podpewndzbofx Ahvepp

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Podpfxoyw I Rxo Ahvepp Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: used, Slide gate vacuum pump DK200 Status: Refurbished Podpfx Asdbby Hohvspp Warranty: 12 months Manufacturer: Leybold Type: DK200 Nominal motor power: 5,5KW Nominal suction capacity: 200m³/h Final pressure without gas: less than 5x10e-3 Accessories: Operating manual with spare parts list Delivery: short term

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm Ppodpfx Ajyw I I Rshvop y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Year of construction: 1998, condition: ready for operation (used), Immediately available ex location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, very few operating hours (like new) Motorized backgauge Backgauge controlled – 1000 mm Machine control: Siemens Simatic CP 7 Cutting length: 3050 mm Pedpfxsyw I Iqo Ahvjpp Material thickness up to 10 mm Drive power: 15 kW Weight: 8 t Price: €8,500 plus VAT, ex location

Condition: used, functionality: fully functional, Year of construction: 2008, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 1,100 mm, side roll diameter: 980 mm, roller diameter: 1,430 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 4,160 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, overall weight: 225,000 kg, total length: 9,000 mm, total width: 5,580 mm, total height: 6,100 mm, power: 220 kW (299.12 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG3200 3 roll capacity 3100x200 mm year of make 2008 Capacity : Plate width mm. 3000 Rolling thickness mm. 200 Pre-bend thickness mm. 160 -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Planetary design with pre-pinch fully hydraulic Pjdpfxsyvgauj Ahvspp Rolls surface length mm. 3100 Top roll mm. 1100 Side rolls mm. 980 Electric power on hydraulic unit Hp 220 + Hp 180 Voltage 400 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Oil cooler automatic unit heat exchanger. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension 9000 x 5580 x H 6100 mm -Weight approx. 225 Ton.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate Pjdsyvfliopfx Ahvspp -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece

Condition: good (used), Year of construction: 2018, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW Pedpfsyu U Dljx Ahvjpp weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge * stepless adjustment range * adjustment from behind - by handwheel * including mm scale * max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop with mm-scale - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control)

Condition: used, Bed plate 10ft x 5 ft x 4000kgs (approx) - Matched Pair Pedpfx Ajywziujhvopp

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid base cabinet -Length: 2000 mm -Width: 1420 mm -Plate: with supporting ribs, plate thickness 35 mm -Base cabinet: 6 cabinet doors / shelves (see photos) -Overall dimensions: 2000/1420/H920 mm Ppsdoyu Rzgopfx Ahvep -Weight: 1080 kg

Condition: used, functionality: fully functional, Year of construction: 1995, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 260 mm, roller diameter: 360 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 900 mm, sheet thickness (max.): 23 mm, sheet thickness steel (max.): 20 mm, overall weight: 10,000 kg, total length: 4,100 mm, total width: 1,750 mm, total height: 1,550 mm, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4-roll plate bending machine Imcar-Italy year 1995, model 4RH12/3 , capacity 2000 x18/23 mm TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 16 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Ppsdpfeyu N Rtex Ahvjp Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed -----

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Ppedpfjyu Nr Dsx Ahvep Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm pre-bend 30 mm minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Digital position readout Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm

Condition: new, Year of construction: 2026, controller manufacturer: CYBELEC CybTouch, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 600 mm, power: 10 kW (13.60 HP), 2 in 1 = shear + press brake in one machine with control CYBELEC CybTouch 15'' shear capacity 3200 mm x 6 mm, throat 200 mm; press brake capacity 3040 mm, capacity 100 to; working hight 640 / 1240 mm, control CYBELEC CybTouch 15'', mot. back gauge 700 mm, shadow line, motor 7,5 KW Ppedpfsd Huukjx Ahvep dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine with capacity L = 2200 mm or L = 1400 mm

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Ppodpfx Ajywuihehvop Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 1990, degree of automation: semi-automatic, We are offering an overhauled folding machine by Kramer. Bending length: 2500 mm Material thickness: 2.5 mm (steel) Weight: approx. 4000 kg The machine has been fitted with new spindle nuts and a new bending rail made from tempered 1.2312 steel. Pedpfx Aexcpd Ujhvopp The machine is powered and can be tested. Please contact us to arrange a viewing.

Condition: good (used), Year of construction: 2007, sheet width 1350 mm Ppedpfxjyuzcuj Ahvep plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 2014, sheet width 3140 mm plate thickness 6.5 mm ST thickness at "Niro-steel" 4.0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable max. 800 mm Control M 15 S total power requirement 7.5 kW weight of the machine ca. 6350 kg dimensions of the machine ca. 4350 x 2250 x 1900 mm current new price approx. 60.000 euros special price on request Description : - robust folding machine - high precision for wide bending processes - increased rigidity in design Podeyuzcnopfx Ahvopp - hydraulic drive - with rack and pinion for better control and accuracy - compared to normal hydraulic systems * Easy adjustment of material thickness * Adjustable hydraulic pressure * to adjust the thickness of the material * This prevents damage to the surface of the materials - Smallest return bend 25 mm Equipment: - Program control "M 15 S" with LED display * for bending angle adjustment - Manual backgauge 0 - 800 mm - Manual lower beam adjustment - Light barrier front and rear - 1x freely movable triple foot switch - 2x forklift pockets for easy transportation - Operating instructions (PDF)