Used Gate Fold Buckle Plates for sale (19,348)

Condition: new, Year of construction: 2025, Gate system, width: 1,250 mm, height: 2,000 mm, clear width: approx. 1,000 mm (920 mm leaf + 80 mm gap), consisting of 1 × gate leaf and 2 × gate posts 60 × 40 mm for concreting in, as well as 2 × fence connections. The gate leaf is welded from 8/6/8 wire mesh and is hot-dip galvanized according to DIN EN 1461. It features an adjustable hinge mounting and a metal lock box, adjustable for DIN R or DIN L, prepared for a 30/30 profile cylinder as well as an aluminum fitting set. Delivery includes accessories, screws, etc. Lodpswqfubjfx Affeak

Year of construction: 2005, condition: excellent (used), Magnet plates Laedpexhh Sbefx Affek Year of manufacture: approx. 2005 LxW: 70x75 cm

Condition: used, Year of construction: 1980, length 3500 mm width 1750 mm Lajdpfxow U Eilj Affok thickness of bolster 260 mm number 2 St no. of flutes 6 weight 5 t 2 pieces T slotted floor plates with 6 slots, each 36 mm width. All dimensions and price is only for one plate !

Condition: good (used), plate size: 3000 x 1500 mm plate thickness incl. ribbing: 300 mm Ljdpsdm Dw Djfx Affeak weight: 3000 kg

Condition: good (used), Offer 24132 + 24133 Technical data approx: - 2 pieces T - groove plates total approx. 4970 x 3880 mm Laedpfxjtiybxe Affsk - Clamping plates - length approx. 4970 mm each - Clamping plates - width approx. 1940 mm each - Top panel thickness approx. 90 mm - Panel thickness with ribbing 200 mm - 4 T - longitudinal grooves L 4970 mm each - Distance from outer edge to center of T-slot 110 mm - Distance between the T-slots 550 mm - T-slots for T-nuts M 24 - Lateral holes to connect the two panels together - Weight per panel approx. 6000 kg - Total weight approx. 12 T.

Condition: used, total surface approx. 33,54 m² 6 plates 2,000 x 1,290 mm width of T-slots 30 mm thickness of the plates 95 mm Lsdpfx Afsc S R H Nsfoak weight approx. 1,700 kg per plate - price per plate -

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Laodpsdz Sq Eefx Affsk Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Year of construction: 2018, condition: good (used), Testing equipment used to ensure the quality and production output in a serial process for gearboxes assembly plant. Equipment contains universal robot, camera system and his own control unit. Equipment could be relearned in order to ensure the demanded operations of the client. Ledsh D Ezgjpfx Affjak

Condition: used, Year of construction: 1990, length 8000 mm width 3000 mm number 2 Ledpfx Aev Ey Nqsffjak Plate thickness 400 mm weight of the machine ca. ca. 14 t dimensions of the machine ca. 8 x 3 x 0,4 m 2 pieces available. Plates does have 10 t- slots in length direction each 32 mm wide.

Condition: used, Offer various marking plates, tool tables with the following dimensions and prices: Table 1 with feet: 2000 x 1000 mm, 1,200 kg, price € 1,600 Ledpfxorm Tw Te Affjak Table 2 one leg missing: 2810 x 600 mm, 900 kg, price € 1,000

Condition: good (used), Sanitary gate/channel for hand and footwear disinfection Dimensions: 2600 × 1000 × 1800 mm Ledpfsw Saq Sjx Affeak - Hand disinfection at entry - Cleaning and disinfection of footwear with brushes - Passage control system

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 320-390mm -Number: 24x Fixators available Lajdpfekahkgox Affok -Price: piece -Dimensions: Ø 360/H370 mm -Weight: 41kg/pcs

Condition: good (used), Esterer SS45 full gang saw was technically completely overhauled Only visually the gate is no longer beautiful Passage 45 cm 340 upm 500 stroke with complete hanging, saw blades and Templates with hydraulic roller lifting with splitting wedge with drive power 30 kW with hydraulic power pack with complete switch cabinet Please also visit my other advertisements. I look forward to your inquiry. Laedpfxsfvb Eto Affek

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Laedpsvwlqqsfx Affjk Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1989, condition: used, Pallet feeder 1. folding unit: 6 buckle plates Combination folding rollers Downstream slitter shaft Load protection device Lsdpfx Aobi U Nzjffoak 2nd folding unit: 4 buckle plates Combination folding rollers noise protection device 3rd folding unit: 2 buckle plates Combination folding rollers noise protection device

Condition: new, Filter plates (250 - 1200 mm) for all filter presses in all sizes and qualities, short delivery times, ask us Location is 58762 Altena Lodpfx Aeikl Uieffjak

Year of construction: 2013, condition: good (used), Sanitary Gate/Hygiene Station Elpress 12705749-83202080 Manufacturer: Elpress Cleaning Systems Model / Type: 12705749-83202080 Laedpfx Aow Ht N Ssffek Serial Number: 17785 Year of Production: 14.01.2013 Power Supply: 400 V / 50 Hz 16 A Rated Power: 0.1 kW Operating Pressure: 3 bar Maximum Temperature: 40°C Weight: 180 kg Dimensions: 2500x950x1550 mm

Condition: new, 342943, VAT, Swing Gate Valve Actuator Model: 342943 Condition: New Ljdpfx Ajukq Speffjak

Condition: ready for operation (used), 03. gang saw Pini and Kay VU 65 HH e with splitting wedge Lodpfx Afeh Ict Eofsak with drive motor 45 kW with countershaft with saw blades with saw clamp with hook with templates with blower Location: Austria, near Steyr

Year of construction: 1992, condition: used, Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 Lodpfx Aopwngbeffeak -P max: 21kW -Transport dimensions: 490/400/H490 mm -Weight: 30 kg

Year of construction: 1994, condition: used, Investors: Laedpfobi U Rqox Affek Round stack feeder 1. folding unit: 4 buckle plates Downstream slitter shaft Load protection device 2nd folding unit: 4 buckle plates Laerermschutzeinrichtung accessories: Grooving, perforating, cutting, Shed display

Condition: used, 12136-PA44-0001 / 12136 PA44 0001 / 12136PA440001, VAT Group AG Vacuum gate valve Laedpfx Afoq S T Raofsk Model: 12136-PA44-0001 Condition: Used

Condition: used, Disc valve, flap valve, ball valve, butterfly valve, globe valve, slide valve Lsdpfx Afsd I I Hpsfjak -Manufacturer: KSB, gate valve shut-off valve type BOA-C JL1040 -Connection: DN65 PN6 -Quantity: 2x valve available -Price per piece -Dimension: 170/160/H330 mm / 170/160/H340 mm -Weight: 7.6kg/7.7kg

Condition: ready for operation (used), Working widths 660 mm Equipment 2nd folding unit: • 6 buckle plates Lasded Hgvzjpfx Affsk • noise prevention

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos Lsdpfjtxkn Uex Affsak -Dimensions: 1470/960/H2140mm -Weight: 1283 kg