Permanent magnetic plate 500 x 170 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! Hnodpfszc Euqjx Agmjn TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures. Hsdpfx Asxf Iamegmsnn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Hjdpfxeza Urge Agmonn Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (max.): 22,000 rpm, controller model: Heidenhain 4290, Submitting a bid obligates the buyer to collect the machine by June 24, 2026! Hnedpfx Ajzcpwcegmjn The machine will be dismantled on June 17, 2026, and then stored temporarily. The Z1 linear guide was recently renewed, and the S2 revolver drive was recently replaced. TECHNICAL DETAILS Turning length: 600 mm Turning diameter over cross slide: 410 mm Spindle speed: 22,000 rpm Tool turret: 12-position Tool holder: VDI 40 MACHINE DETAILS Control system: Heidenhain 4290 Operating hours Total operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h EQUIPMENT Large accessories package Powered tools from WTO Note: The seller can offer transport of the machine within Europe for an additional fee (offer upon request).

Condition: excellent (used), Year of construction: 2007, CNC Lathe GILDEMEISTER CTX 420 Linear 2007 Hsdpfx Agow Slfbsmjnn Siemens 840 D Technical specifications: * Turning length: 600 mm * Turning diameter: 680 mm * Spindle bore: 79 mm * Spindle speed: 5000 rpm * Spindle power: 25 kW * Chip conveyor: Yes * Variable spindle speed: 5000 rpm Main spindle with bar capacity: Ø 65 mm Self-centering Autoblock chuck: Ø 250 mm

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Hnjdpfjza D Rfox Agmjn Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Hedpfx Agoza D Iwsmsnn Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Hedpfx Ajua Tbwsgmsnn Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Hodpfezargnjx Agmenn Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, controller model: Siemens Sinumerik 828D CNC, ATTENTION – Equipment update: Instead of a RENISHAW measuring probe, a Renishaw tool presetter is included! TECHNICAL DETAILS Travel range X-axis: 760 mm Travel range Y-axis: 430 mm Travel range Z-axis: 460 mm Spindle mount: SK40 Spindle speed: 10,000 rpm Feed rate: 10,000 mm/min Table size X: 900 mm Table size Y: 410 mm Max. workpiece weight: 350 kg Number of axes: 3 MACHINE DETAILS Control system: Siemens Sinumerik 828D CNC Tool changer: 24-position Drive power: 12 kW Tool cooling through the spindle: 30 bar EQUIPMENT Renishaw tool presetter Chip conveyor Hnjdpjzap Dwjfx Agmon

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Hnjdevmivcopfx Agmsn Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, controller model: Mitsubishi 32-bit EDM Steuerung, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Hjdpfx Aozapyljgmonn Travel range Z-axis: 300 mm Max. workpiece size X: 700 mm Max. workpiece size Y: 500 mm Max. workpiece size Z: 250 mm Max. electrode weight: 50 kg Max. workpiece weight: 500 kg Table size X: 550 mm Table size Y: 470 mm MACHINE DETAILS Control: Mitsubishi 32-bit EDM control Electrode changer: 20-position Generator: 50 A EQUIPMENT Lowerable container

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 250 mm, cutting width (max.): 280 mm, saw band length: 2,950 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw band dimensions: 2,950 x 27 x 0.9 mm Speed: 15-100 m/min Vise opening: 285 mm Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 220 mm Cutting capacity at 90° (rectangular): 280 x 220 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (rectangular): 140 x 100 mm Hnsdpfezapxzsx Agmon Cutting capacity at 45° (round): 230/200 mm Cutting capacity at 45° (square): 200/170 mm Cutting capacity at 45° (rectangular): 220 x 200/200 x 140 mm Control: conventional MACHINE DETAILS Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2,500 x 2,230 x 2,050 mm

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Hnodpfjtqfhxex Agmsn Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 320 mm, saw band length: 3,150 mm, saw band speed: 667 mm/s, saw band width: 25 mm, TECHNICAL DETAILS Saw band dimensions: 3,150 x 25.4 x 0.9 mm Speed 1: 20 m/min Speed 2: 40 m/min Cutting capacity at 90° (round): 260 mm Cutting capacity at 90° (square): 250 mm Cutting capacity at 90° (flat): 320 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 210 mm Cutting capacity at 45° (flat): 240 x 200 mm Control: NC EQUIPMENT - Saw band storage Hjdpfx Agjzapv Temenn