Used Furnace Cars for sale (5,100)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included 160 kW compressor for 3 mm glass included In good condition. Kedpfoxtf Dfex Ag Asnd

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Scope of delivery: Furnace only, no additional accessories – see original photos Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) Kedpfxjxr S Rpj Ag Aond • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition machine (new), available immediately - Internal dimensions (WxDxH): 1250 x 4000 x 1450 mm - External dimensions (WxDxH): 1900 x 4900 x 2500 mm - Power consumption: 240 kW - Current consumption: 350 amperes - Maximum temperature Tmax: 1300°C - Furnace weight approx.: 6000 kg Knsdpsp H Tb Tofx Ag Ajd - Control system: JUMO IMAGO 500 with software packages (OPCA & PCC) - Chart recorder: JUMO Logoscreen 601 - Includes feedthrough and 6 additional sockets for recording customer type K thermocouples - Multizone design (3 zones) - Control panel with solid-state relays - Control panel air conditioning - Automatic supply and exhaust air dampers - Automatic exhaust air dampers, regulated as follows: small cooling (2 dampers open), large cooling (all 6 dampers open) - Regulated cooling system (including frequency converter, controlled by the control system) with supply air fan - Electrically driven bogie hearth on rails - Max loading capacity 3.5 tons, reinforcement available on request! Metal loading surface for bogie hearth on request! - Swing door - Documentation and CE declaration Reinforcement of the bogie hearth available on request! See image 4 (conversion example)! We are happy to offer installation, commissioning, and staff training. Please contact us! We supply new and used industrial furnaces. Viewing available in our warehouse upon request! Keywords: bogie hearth furnace, bogie furnace, ovens, annealing furnace, firing kiln, hardening furnace, heat treatment furnace, oven, tempering furnace, curing oven, drying oven, industrial furnace

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Knjdpfx Agsiryyae Asd Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: as good as new (ex-display), Year of construction: 2023, type of input current: AC, El. heated roller sintering furnace, make Riedhammer type: TR 18/4x33/10-E 90 condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm usable width: 4x 330 mm usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm Knjdpep T Th Hsfx Ag Ajd roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

Condition: good (used), mileage: 406,235 km, power: 207 kW (281.44 HP), first registration: 02/2020, fuel type: diesel, color: yellow, axle configuration: 4x2, tire size: 245/70R19,5, fuel: diesel, wheelbase: 5,180 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, traction control, trailer coupling, = Additional Options and Equipment = - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control unit) - Hydraulic system - Short cab - PTO (power take-off) - Pump - Winch = Remarks = Number of axles: 2, Configuration: 4x2, Twin tires, Payload: 5,530 kg, Kerb weight: 6,460 kg, Gross weight: 11,990 kg, Total fuel tank capacity: 250 liters, Tow hitch, Unbraked trailer load: 750 kg, Center axle trailer load, braked: 5,729 kg, Kingpin diameter: 40 DIN, Winch, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: Yellow, Heated mirrors, Rear-view camera, Lighting type: Halogen lamp, Lane departure warning system, Engine power: 207 kW (278 Hp), Fuel: Diesel, Euro: 6, Transmission type: Automatic, Gearbox type: ZF, Gears: 12, Power steering, ABS, ASR, Hydraulic system, PTO, PTO type: 1, Starter battery, Pump, Number of seats: 2, Seating arrangement: 1+1, Upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: ZF, 12 gears, automatic Axle Configuration Tyre size: 245/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tyre tread left: 10 mm; Tyre tread right: 10 mm; Suspension: Leaf spring Axle 2: Twin tires; Tyre tread left inner: 8 mm; Tyre tread left outer: 5 mm; Tyre tread right inner: 6 mm; Tyre tread right outer: 5 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 955 x 255 x 331 cm Weights Unladen weight: 6,460 kg Payload: 5,530 kg Gross vehicle weight: 11,990 kg Functional Pump: Yes Interior Number of seats: 2 Condition Technical condition: Good Visual condition: Good Damages: Damaged vehicle (not operational) Number of keys: 2 Financial Information Leasing price: €868 per month (default, 60 months); Please inquire for more information and conditions Identification Registration: 78-BPH-9 = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of various years and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registration numbers are arranged quickly Knedpfjxmrqrsx Ag Ajd • Skilled technical services • The assurance of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Knodpfx Aexp Rbhjg Ajd

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Kedpfxsu A Tf Dj Ag Aend Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Kedpfxjtbq Eqo Ag Aend Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Condition: good (used), Year of construction: 1940, functionality: fully functional, type of input current: three-phase, total height: 4,000 mm, total width: 3,000 mm, total length: 6,000 mm, year of last overhaul: 2021, input voltage: 10,000 V, temperature: 1,600 °C, power: 1,200 kW (1,631.54 HP), overall weight: 30,000 kg, Klein Lichtbogen Ofen 3-5 tonen Kapazitaet, 1,2 MW/ 10 kV. Knsdpfx Aeg S U Dkjg Asd

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer Kedpfop T T Hnex Ag Aond type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees MARCELS MASCHINEN AG Knsdpfx Agjhz D Iwj Ajd

Year of construction: 1984, condition: ready for operation (used), Two industrial shaft furnaces Nabertherm for heat treatment are available. 1) Nabertherm S430, year of manufacture: 1984, power: 54kW, max. temperature: 1200°C, usable volume: approx. 430l. 2) Nabertherm S300/SO, year of manufacture: 1977, power: 36kW, usable volume: approx. 300l. An on-site inspection is possible. Kedoxn S Ugopfx Ag Aend

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Kjdpjxnpw Esfx Ag Ajnd Alternatre Gas inlet. Good working condition. Please check out our other listings as well.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Chamber furnace, very good condition. 12 months warranty. With pull-out base, fully refurbished. The furnace is not suitable for hot removal, but stress-relief annealing is possible! Knjdsu Tqzzspfx Ag Ajd Tmax 1320°C Capacity: 330 liters Internal dimensions (W x D x H): 590 x 720 x 800 mm External dimensions (W x D x H): 930 x 1310 x 1840 mm Controller: TC 707 (99 programs with 48 segments each) SIC plates on bogie hearth (new) 5-sided heating (new) Manual intake and exhaust damper (new) Load weight: 40 kg per 100 liters (total 132 kg with all plates etc.) Power: 22 kW 3/N/PE 400V AC CEE 32 A connection Documentation, CE declaration Refurbished / New Parts: Contactors, complete heating system, bogie hearth lined with lightweight refractory bricks, bogie hearth SiC plates, seals, manual intake and exhaust damper. Inspection at our facility by appointment. Call us! Furnace, furnaces, industrial furnace, chamber furnace, kiln, drying oven, tempering oven, laboratory furnace, ceramic kiln, hardening furnace.

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace TAMGLASS, HTF-2136-ABT-10-R 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Ksdpfx Agovkhl De Ajnd Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) In good technical condition. Inspection is possible by appointment.

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) Knodpexpuahefx Ag Asd annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Kedpfx Agovhazfo Asnd Temperature 1150° MARCELS MASCHINEN AG

Year of construction: 2003, condition: excellent (used), For sale Nabertherm N650/G furnace Furnace in very good condition with shelves and frame. Knodpfxsvrg Sls Ag Asd Technical data: Capacity 650 L Power: 26 KW Voltage: 400 V Current intensity: 37.5 A Max temp: 900 degrees Celsius Chamber dimensions width 70 cm depth 85 cm height 110 cm External dimensions width 112.5 cm depth 155 cm height 192 cm Nabertherm C40 controller

Year of construction: 2013, condition: used, max. temperature 1.100 Grad size of opening 250 x 170 mm depth of chamber 370 mm volume 15 L Knjdpoxf I T Hjfx Ag Asd voltage 230 V total power requirement 3,6 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,48 x 0,65 x 0,57 m - Serial-No.: 271414 - control: NABERTHERM B180

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty Knedoxp Rn Uopfx Ag Aod - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Year of construction: 1985, condition: used, Hardening furnace Heraeus Knedpfx Agogtxuqo Asd Type KM 260 width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c

Condition: used, Temperature: 950°C Knsdpfx Agsxnzcgj Asd Useable Dimensions (L x W x H): 5.000 x 2.600 x 1.100 mm

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° MARCELS MASCHINEN AG Knedpfxow Nnque Ag Aod

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Kjdpfx Agsg R Sh Aj Aond Wide Range of Used Machinery, Industrial Equipment