Used Gary Long Furnace for sale (7,253)

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Hfodpfx Asz I Tt Isg Eon Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: ready for operation (used), functionality: fully functional, Vita ZYrcomat Firing Furnace / Firing Device / Ceramic Furnace High-temperature firing device for the VITA In-Ceram® technology. The VITA ZYrcomat T is a specially developed firing unit for atmospheric high-temperature sintering firings. Atmospheric long-term high-temperature sintering firings for frameworks made of zirconium dioxide and aluminum oxide. Technical Data Dimensions: Firing device: W × H × D = 360 × 810 × 490 mm Power unit: W × H × D = 500 × 210 × 350 mm Weight: Firing device: 32 kg Housing with power unit: 27.5 kg Firing chamber (useable space): Diameter: 84 mm Height: 90 mm Firing chamber temperature: max. 1600 °C Electrical Data Electrical connection: 230 V AC, 50 Hz Power consumption: max. 1500 W Classification: Protection class 1 Good working condition. Please chech out out other listings as well. Hsdsxgb Nqopfx Ag Ejfn

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Hfsdpfx Agsz Dhm Uo Een

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Hfsdpezu Nvzjfx Ag Een Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Hodezvdxaopfx Ag Eefn Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Tool holder SK 50. Software features, see PDF Software License. The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, Condition: very good; the furnace has only been used for 100 batches. The delivery includes a loading electric cart and three charging baskets. Direct sale to end-users only. Hsdpfx Agezz A Rrj Ejfn W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Hfedpfxjzuabzs Ag Esn Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types Hedpfx Ajz Rv Dpeg Eefn - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report Hfsdpfx Agozbr U Uo Esn -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. Hfedpfxoz Ru Iyo Ag Een The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional (Photos = sample model) All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Hsdpsy N S Dysfx Ag Eofn Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Condition: like new (used), Year of construction: 2008, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23477, workpiece weight (max.): 550 kg, total width: 1,300 mm, total length: 1,150 mm, total height: 2,800 mm, power: 12 kW (16.32 HP), input voltage: 400 V, usable tank capacity: 150 l, We offer this almost unused Rohde electric chamber furnace, model KEU 150 N SoB, manufactured in 2008. Manufacturer: Rohde Type: Electric chamber furnace KEU 150 N SoB Year of manufacture: 2008 Maximum temperature: 650 °C High-quality programmable control system Bentrop Thermocomputer TC 507 Hodpez Ehi Ejfx Ag Eefn Neatly arranged control cabinet No visible signs of corrosion or thermal damage Industrial special version with extraction/air guidance Complete documentation If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, We are offering this used Johannsen wide belt sanding machine + additional sanding belt + dust collection container for sale. The machine nameplate is from the dust collection system, not from the sanding machine. Manufacturer: Johannsen Model: Wide belt sanding machine Year of manufacture: 1996 If you have any questions or require further information, please feel free to send us a message or call us. Hfsdpezzlvwofx Ag Een

Condition: good (used), Year of construction: 1973, rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen Hfjdjzvfdqepfx Ag Esn

Condition: good (used), Year of construction: 2015, functionality: fully functional, Fanuc control system, Turning and milling lathe, Pick-up spindle, Hfodpfx Agez Ryynj Esn Tool magazine.

Condition: used, Year of construction: 2008, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,400 °C, inner dimension length: 400 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 1,020 mm, total width: 810 mm, total height: 1,510 mm, overall weight: 400 kg, Equipment: CE marking, 2 electrically heated chamber furnaces, manufacturer Thermconcept. Hfsdpfx Agjzmfvno Esn Type: KC 64/14 Maximum temperature: 1400 °C Internal dimensions: 400 x 400 x 400 mm (W x D x H) External dimensions: 810 x 1020 x 1510 mm (W x D x H) Volume: 64 l Power: 15.0 kW Current consumption: 22 A

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, Stock item, immediately available -Tmax 1350°C -Usable space L x W x H (mm) 600 x 500 x 500 -Batch weight 300 kg -External dimensions L x W x H (mm) 4200 x 2500 x 3500 -Space requirement L x W x H (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse rating 250 A -Control system: Stange SE 607 -Documentation Included: -Protective gas buffer tank -Vacuum pump stand -4-flap design for cooling, allowing the flow direction of the gas stream to be adjusted horizontally or vertically. -There is the possibility of connecting a liquid nitrogen supply, allowing the furnace to cool down to -80°C. -Internal insulation made of graphite hard felt, CFC-protected and reinforced. Hedpfxezr U Ano Ag Esfn We will build a second identical furnace by the end of the year. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspection in our warehouse by appointment! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces.

Condition: used, Year of construction: 2008, machine/vehicle number: 3079241-0010, functionality: fully functional, power: 175 kW (237.93 HP), input voltage: 400 V, input current: 253 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 21,000 kg, number of chambers: 2, control type: PLC-controlled, Aichelin VKEs 3-60/65/110 Multi-chamber furnace Connected load: 175 kW Max. temperature: 1100°C Hfedsx Tup Hepfx Ag Eon Max. load: 650 kg Total weight: 21 t Furnace atmosphere: N2, methanol, NH3, air, natural gas, propane With loading table

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 13276/1694, type of input current: three-phase, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, input voltage: 380 V, control voltage: 24 V, input current: 250 A, input frequency: 50 Hz, Equipment: documentation/manual, Inductotherm 150 kW induction furnace; comes with 3 new crucibles. Aluminum capacity: 60 kg, melting time: 30 min. Hfjdpfx Aezfif Rsg Esn Bronze capacity: 200 kg, melting time: 60 min.

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° Hjdpfx Asz Akgwsg Esfn - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.

Condition: good (used), Year of construction: 2011, Matador MD 80 C bakery oven - used - year of manufacture 2011 - area 8 m² - 4 chambers (1.2 x 1.6 m) - one chamber with a pull-out function - hood with fan - computer control - gas or oil burner - good technical condition - collection from warehouse / shipping option available Hedpjznwqyjfx Ag Ejfn - possibility of refurbishment and installation - price on request

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 800 kg, We are offering this very well-maintained Balzer 800 aluminum melting furnace, manufactured in 2008. Hedez Dpy Nepfx Ag Ejfn Manufacturer: Balzer Model: Balzer 800 Year of manufacture: 2008 Condition: very good Category ID: 235 Type ID: 1729 Machine type: Aluminum melting furnace If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2010, 2010 Mahler HWE 4400/2000/4400 Tempering Bogie Hearth Furnace With Pro Therm (Siemens PLC) Control & Switchgear Usable Chamber Approx Dimensions L4,400 x W4,400 x H2,000mm. Holding Time At 600°C 3–4h. Temperature Uniformity (After 4h Hold) +/- 5K. Batch Weight 15t. Furnace Atmosphere Air. Material Of Parts Steel. Heating Electric. 8 Heating Control Zones. 7 Air Circulation Fans. Installed Heating Capacity Approx 1,680kW Bogie (Car) Approx Travel Speed 50mm/s. Bogie (Car) Approx Load Capacity 15t. Number Of Doors 2. Surface Losses Approx. 30kW. Exhaust Air Volume Flow Approx. 1,000–1,200 m³/h. Exhaust Air Temperature Approx. 250 °C. Max. Ambient Temperature 40 °C. Mains Voltage 3 x 400 V Control Voltage 230 V AC / 24 V DC. S/No. 241 09 (2010). Hsdjz Nh Drepfx Ag Eofn

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit Hfodpfjugvxxox Ag Esn - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Condition: excellent (used), Year of construction: 1983, Johannsen Long Belt Sander T 82 - K Pneuma - Air-cushioned sanding pad - Max. workpiece length: 2800 mm - Table width: 950 mm - 5.5 kW main motor - 2.2 kW fan motor Hsdpexpmtyofx Ag Eofn - Sanding belt width: 160 mm - Extraction connection diameter: 180 mm - Right/left rotation - Handwheel adjustment - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight approx. 1000 kg Location: ex stock Saarland - immediately available -