Used Front Lathe for sale (5,488)

Condition: good (used), turning diameter over cross slide: 267 mm, turning diameter: 432 mm, center width: 1,500 mm, 3-jaw chuck diameter 250mm tool holder device tail stock steady rest coolant device Technische Daten / technical details: Spitzenweite / center to center 1500 mm Dreh-Ø über Bett / turning diameter over bed 432 mm Nedpfx Afstq Exroredd Dreh-Ø über Schlitten / turning diameter over sledge 267 mm Dreh-Ø über Kröpfung/ turning diameter in the gap 710 mm Spindelbohrung / spindle hole 76 mm Drehzahlbereich / spindle speed 20-1600 UpM /rpm Antriebsleistung / drive capacity 9,3 kW Gewicht der Maschine ca. / weight ca. 2310 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1968, Technical details: bore capacity in St 60 - full boring: 40 mm drill capacity in cast iron: 55 mm Nsdou Iwwzjpfx Afrodd turning diameter over bed: Ø 22 - 2200 mm clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm Total power requirement: 5,0 kW machine weight approx.: 1,2 t dimension machine xH: 1,70 x 0,80 x 1,40 m Relieving lathe This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: - Speed 22 - 2000 rpm - feed rate range 0,025 - 0,5 U/mm - three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws - headstock bore 45mm - drilling spindle taper MK 5 Operation via control panel on the side of the machine. By removing the lathe chuck, the spindle can be used as a drilling unit. max. slide adjustment 300 mm accessories: -div. outer jaws for lathe chuck i.D. *

Condition: excellent (used), Vise for lathe Jaw width 100 mm Nodpfx Afsf Dx R Aeredd maximum opening width 100 mm vertical adjustment 100 mm Total height 300 mm

Condition: used, For sale: Czechoslovakian TOS lathe, model SN 55 B, as shown in the photos. The machine has undergone a minor inspection. I would rate its condition as good plus. Loading at the site is provided. The machine is connected, in working order, and ready for testing. Technical data: Minimum spindle speed: 10 RPM Maximum spindle speed: 1000 RPM 16 spindle speeds Spindle bore: 76mm Chuck diameter: 315mm Turning length: 2000mm Swing over bed: 560mm Swing over cross slide: 280mm Removable bridge Quick-change tool post 4 inserts for tool post Ndjdpfx Ajxyu Adefrjd Right and left jaws Large and small steady rest Half steady rest

Condition: good (used), Year of construction: 1996, Weiler lathe Type Condor B Center height 165 mm Center width 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle head DIN 55027 size 5 Spindle bore 40 mm Inner taper main spindle MK 5 Nodpfx Afsvbwd Rersdd Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Weight 1040 kg 3 jaw lathe chuck 4 jaw lathe chuck Multifix B Rotating center punch

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm Ndodpovtthiofx Afrjd bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, turning diameter: 330 mm, center width: 650 mm, 3-jaw chuck tool holder device tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Ndsdswtx A Depfx Afrod Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Nedpfx Afou Iwyisrodd Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: excellent (used), Year of construction: 2017, operating hours: 901 h, functionality: fully functional, Controller HAAS (15 inch LCD screen, USB, 1 Mb Programspeichern, Ethernet, IQS, VPC) Chuck dia D210 mm Swing dia over bed 419 mm Max. turning dia D279 mm Max. turning length 406 mm X travel 305 mm Y travel +/-51 mm Z travel 406 mm Spindle bore D88,9 mm Max. bar diameter D64 mm C axis 0,01 degree Spindle speed 4000 rpm Spindle nose A2-6 Max. driven tool speed 6000 rpm Rapid speed X/Y/Z = 12 / 12 / 30,5 m/min. Spindle power 14,9 kW Turret Hybrid 6 x BOT / 6 x VDI40 - 12-fold Tailstock sleeve MT3 Tailstock sleeve D95 mm Tailstock travel 508 mm Power required 400V, 40A Weight 3600 kgs Dimensions LxWxH = 3200 x 1540 x 1803 mm Accessories, features - C axis programmable - Y axis Njdpfx Afjxylx Norsdd - Driven tool turret (all positions) - Integrated tool presetter - Chip conveyor - 3 jaws chuck D210 mm - Tailstock - Makros and software options - Tailstock The machine can be fine in very good condition (only 900 feedrate hours).

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping Ndodecnxrcspfx Afrod

Condition: used, Year of construction: 1965, multifix ja centre distance 1500 mm Ndjdpfjxylq Esx Afrod documentation ja weight of the machine ca. 3 t

Condition: used, Year of construction: 2009, swing diameter 1600 mm face diameter 1400 mm Control Siemens Sinumerik 840D SL turning height 1245 mm max. table load 9000 kg table drive 60 kW torque - table 13400 Nm Table rpm 450 1/min speeds c-axis 0,004-5 1/min. feed range 18000 mm/min dimensions of the machine ca. 8,5 x 5,3 x 5,7 m weight of the machine ca. 47,4 t Crossbeam support: -Travel range X-axis: ± 950 mm Crossbeam stroke W-axis: 600 mm Ram : -Cross-section Ram: 250 x 250 mm -Plunging diameter: 340 mm -Travel Z-axis Ram: 1100 mm Nsdexylm Topfx Afrsdd Drilling and milling device: - Distance between milling spindle and machine table 1245 mm - Tool holder SK 50 - Drive power 30 kW - Speed range 2000 rpm - Torque 1395 Nm Equipment/accessories: -16-40-fold pick-up magazine -Protective device -Various turning tool holders -Various SK50 tool holders and tools -Various clamping devices -Coolant device with filter -Chip conveyor -Documentation

Year of construction: 2006, condition: good (used), CNC control Sinumerik 810D 12-fold revolver bar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm) chip conveyor tail stock Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 300 mm max. Drehlänge / max. turning lenght 300 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 45 mm Drehzahl / spindle speed 6000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Njdpfslfdazjx Afrsdd Eilgang Z / rapid feed Z 36 m/min. Antriebsleistung / drive capacity 20 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 700 mm turning diameter over support: 350 mm turning length: 3000 mm center height measured in bed: 320 mm spindle bore of work spindle: 70 mm spindle speed max.: 10 - 1250 / 24 step U/min cross feed: 0,0256 ... 0,378 mm/U longitudinal feeds:: 0,064...1,025 mm/U tailstock quill adjustment:: 240 mm tailstock taper MT: MK5 Ndsdpfx Afsu Trb Ajrjd total power requirement: 14,0 kW weight of the machine ca.: 5,0 t dimension machine xH: 5,1 x 1,8 x 1,6 m Travel Support: Support lengthwise=3000mm Support transverse=400mm Tool support=220mm Tool slide can be swiveled 90° right/left Equipment: digital path measuring device Heidenhain 4-fold tool holder machine lamp Coolant device with pump Accessories: 1x steady rest open 160mm and 1x steady rest closed 400mm 3-jaw chuck Ø 335 with soft jaws 18 sets of used, soft jaws *

Condition: excellent (used), Second-hand wood lathe, Killinger KM 1000 S - Very good condition - Ndodpor Eltcofx Afrjd Motor 0.75 kW / 230 V Center width 1000 mm and center height above the bench bed 200 mm Accessories: - Center punch - Turning iron (see photos) - steady rest - face plate - Tailstock - Hand rest - 8 speeds Location: From stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2009, swing diameter 2800 mm faceplate diameter 2200 mm control Siemens Sinumerik 840D turning height 2140 mm max. table load 17000 kg table drive 80 kW torque - table 44900 Nm Table rpm 280 1/min speeds c-axis 0,006-7,5 1/min feed range 18000 mm/min total power requirement 160 kW weight of the machine ca. 61,1 t dimensions of the machine ca. 11,4 x 6,53 x 6,6 m Crossbeam support: -Travel range X-axis: ± 1550 mm Crossbeam travel W-axis: 1200 mm Ram: -Cross-section: 300 x 250 mm -Plunging diameter: 380 mm -Travel range Z-axis: 1750 mm Nsdpfx Afoxylmysrodd Drilling and milling equipment: - Distance between milling spindle and machine table - SK 50 tool holder - Drive power 30 kW - Speed range - 2000 rpm - Torque 1395 Nm Equipment/accessories: -24-72 times pick-up magazine -Protective device -Various turning tool holder -Various tool holders SK 50 with tools -Various clamping vices -Coolant device with filter -Chip conveyor -Documentation

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 669 mm, turning diameter: 330 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 762 mm, CNC control Sinumerik 828D 12-fold revolver Sauter VDI40 driven tools C-axis collet chuck device Tool Eye part catcher chip conveyor tail stock coolant device with high pressure pump bar loading device LNS Technische Daten / technical details: Ndjdoukcu Nspfx Afrsd Umlaufdurchmesser über Bett / rotary diameter over bed 600 mm max. Drehdurchmesser / max. turning diameter 330 mm max. Drehlänge / max. turning length 669 mm X-Weg / X-travel 260 mm Z-Weg / Z-travel 762 mm Drehzahl / spindle speed 3400 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes max. Stangendurchlass / max. bar diameter 75 mm Eilgang X / rapid feed X 20 m/min Eilgang Z / rapid feed Z 24 m/min Gewicht der Maschine ca. / weight ca. 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Technical details: turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm Ndodjwa Nwfspfx Afrod tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Length: 1000 mm Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Weight: 70 kg Nedpjw Hl Adsfx Afrjdd Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2013, Fanuc Oi-TD CNC control 12-fold turret head (VDI 30 taper) collet chuck device C-axis driven tools tailstock coolant device chip conveyor With the machine are 6 driven tools, some fixed tool holders, 3-jaw chuck and collets Technische Daten / technical details: max. Umlaufdurchmesser über Bett / max rotary diameter over bed 460 mm max. Umlaufdurchmesser über Schlitten / max rotary diameter over sledge 328 mm max. Drehdurchmesser / max. turning diameter 303 mm max. Drehlänge / max. turning lenght 334 mm Planweg (x) / cross way (x) 181 mm Längsweg (z) / longitudinal way (z) 390 mm max. Stangendurchmesser / max bar diameter 52 mm Nedpfx Afep T Uxxsrsdd Drehzahlbereich / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang x,z / rapid feed x,z 30,30 m/min Antriebsleistung Spindel / drive capacity spindle 9/11 kW Gewicht der Maschine ca. / weight 3000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Wood lathe Ndjdpfx Aei Akv Sefrjd Length: 1750 mm Motor power: 3 KW Voltage: 380 Volt Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2017, operating hours: 900 h, functionality: fully functional, turning length: 520 mm, turning diameter: 372 mm, TECHNICAL DETAILS Turning diameter over bed: 570 mm Max. turning diameter: 372 mm Max. Turning length: 520 mm Chuck: 152 mm (203 mm) Spindle speed: 6000 (45000) rpm Bore diameter: 60 mm (68 mm) Travel (x/z): 215 mm / 562 mm MACHINE DETAILS Year of construction: 2017 Weight: 4000 kg Operating hours: 849 h (as of November/December) EQUIPMENT - Control system: Siemens Sinumerik 820 D incl. Operate - 3 jaw power chuck - 12-fold tool changer with driven tools - Automatic tool measurement - parts catcher - programmable tailstock - oil skimmer - Work area lighting - 2x WTO drilling and milling unit, straight BMT 55 - 2x WTO drilling and milling device, angled BMT 55 - 1x facing holder 25x25 mm Ndodorpiuyspfx Afrsd - 3x facing and longitudinal turning holder - 4x universal combination holder - Chip conveyor

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed Nsdpfx Afsvutyhsredd 330 mm Turning diameter over support 160 mm Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. 2000x1000x1600 mm Bar diameter 38 mm Speed range 70 - 2000 rpm Spindle nose Feed range 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Year of construction: 1979, condition: good (used), 3-jaw chuck Multifix tool holder device tail stock Technische Daten / technical details: Drehlänge / turning lenght 1000 mm Dreh-Ø über Bett / turning Ø over bed 520 mm Dreh-Ø über Schlitten / turning Ø over sledge 300 mm Drehzahlbereich / spindle speed 30-1600 UpM /rpm Gewicht der Maschine ca. / weight 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Ndsdpfxonqy Haj Afrsd

Year of construction: 2012, condition: good (used), Mazatrol Smart CNC control 3-jaw chuck C-axis driven tools 12-fold revolver Tool Eye tail stock coolant device chip conveyor Technische Daten / technical details: max. Umlaufdurchmesser / max. swing diameter 660 mm max. Drehdurchmesser/ max. turning diameter 350 mm max. Drehlänge / max. turning length 532 mm Planweg (x) / cross way (x) 225 mm Längsweg (z) / longitudinal way (z) 560 mm Drehzahlbereich / spindle speed 5000 UpM /rpm Drehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X/Z / rapid feed X/Z 30/33 m/min Antriebsleistung Spindel / drive capacity spindle 15 kW Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Nodpfxsiyx Die Afredd