Front-Loading Panel Saws

HOLZMA HPP 510/43/43

Condition: used, Year of construction: 2006, power: 25 kW (33.99 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, TECHNICAL DETAILS Isdpfx Abozmtn So Ioba Max. panel width: 4,300 mm Max. panel length: 4,300 mm Min. cutting height: 3 mm Max. cutting height: 110 mm Max. saw blade overhang: 125 mm Feed and Grippers Number of grippers: 9 Number of grippers on the sliding stop: 9 Max. feed rate: 80 m/min Max. feed rate of the saw carriage: 120 m/min Saw Carriage Max. tool diameter: 450 mm Motor power: 18 kW Speed: 2,870 rpm Scoring Unit Design: Postforming scoring unit Max. tool diameter: 340 mm Motor power: 2.2 kW Speed: 2,880 rpm MACHINE DETAILS Control system: Windows XP Machine programming software: CADMATIC 3 Total connected power: 25 kW EQUIPMENT CE marking 4 front support tables 9 grippers on the sliding stop Postforming scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8206

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Ijdpsxnlflefx Ab Ijba

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Ibedpfx Aex A Thkjb Iea Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22

Condition: used, machine/vehicle number: 008206, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm Ijdex A Tizspfx Ab Ijba No of Grippers: 9

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 3,300 h, power: 102.97 kW (140.00 HP), motor manufacturer: Deutz, machine/vehicle number: WSXCZ20200TD10041, Equipment: air conditioning, cabin, front power take-off, TTV transmission Ibsdpfx Aoyalwtob Ioa Front axle and cab suspension Front linkage with PTO

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 0-243-02-2974, functionality: fully functional, The equipment was purchased new in 2007 for its current location. The factory ceased operations in 2016, and the equipment has not been used since then. The equipment is available for purchase as-is or fully dismantled and loaded onto a truck. Ijdpfx Abszcn Nde Ieba Do not hesitate to contact for more information.

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Ijdpfx Aewuck Ijb Ieba Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: used, machine/vehicle number: 008514, Max. panel width: 4250 mm Max. panel length: 4300 mm Main saw blade projection: 95 mm Ibedpfoy Edn Asx Ab Ioa No of Grippers: 7 Second flexible pusher: yes

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 11,900 h, Cutting dimensions: 4300x4300 mm Blade diameter: 350 mm Label printer Total power: 20.9 kW Maximum cutting speed – 130 m/min, steplessly adjustable Maximum pusher speed – 90 m/min Isdpfsytt H Ajx Ab Ieba Maximum cutting height – 80 mm Four air tables Automatic scorer adjustment Year of manufacture – 2014 Operating hours – 11,900

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. Ibjdpfx Abeym Nvts Iea The machine features: CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel CE certified The machine has been regularly maintained and is ready for operation.