Used Fps for sale (289)

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 Bledpfxeu Dm E Hj Aafoc >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 Bsdpfx Aasvbifgefslc >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed on 2 axes Blsdpfx Aajwpi Dqjfec >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Veneer cutter, electrically adjustable, year of manufacture approx. 2005 Bsdpjxwc Rqefx Aafslc

Condition: new, Year of construction: 2025, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Bsdpfx Aaeh Su Ipjfolc Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: new, Year of construction: 2025, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse Bledpfx Aash I Nqwefsc 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, Year of construction: 2025, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, Bodpfx Ash R S Tcsafslc EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, Year of construction: 2025, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Bljdpfoh Sptnox Aafjc Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: excellent (used), Portable motor pump in very good technical and visual condition. Fully complete, undamaged, ready for work or for a collection. Original Volkswagenwerk AG West Germany engine, type 122, displacement 1192 cm³, power 25 kW (34 HP) at 3600 rpm. Pump manufacturer: Gebr. Bachert, 7107 Bad Friedrichshall Model: FP 8/8 Capacity: 800 l/min at 8 bar Year of manufacture: 1984 Engine runtime: 55 engine hours • Very good condition, engine starts and runs smoothly. • Complete VDO gauges, manometers, oil pressure indicator, tachometer. • Clutch drive with control lever. • Original quick couplings and discharge elements. • Red housing, original paintwork preserved with Bachert logo. • Ideal for demonstration, museum display, or as a reserve fire brigade unit. Bjdpfx Aexmtzxjafolc

Condition: excellent (used), For sale: Original Ziegler FP 8/8 (DIN 14420) portable fire pump with the legendary Volkswagen air-cooled engine – 1192 cm³ displacement, 34 HP. ✅ Key specifications: • Manufacturer: Albert Ziegler Giengen/Brenz (Germany) • Model: FP 8/8 • Year of manufacture: 1974 • Engine: Volkswagen Type 122 – 1.2 petrol, 34 HP at 3600 rpm • Pump capacity: 800 l/min • Head lift: 80 mWS • Rated speed: 4000 rpm • Weight: 190 kg • Gear ratio: 1:1.45 • Operating hours: 16.3 h – practically like new! ✅ Condition & features: • The fire pump is complete and in fully original condition. • Nameplates and markings are intact. • The VW engine starts easily and runs smoothly. • Mobile design, easy to transport. • Ideal for a museum, collection, display, or as a reserve unit for a volunteer fire department. 🔥 Unique – VW Beetle engine in fire service! Volkswagen engines used in Ziegler pumps are highly valued today – reliable, easy to service, and collectible. 📦 Collection in person or transport upon arrangement. Bjdpfxjxa En Rs Aafjlc

Condition: used, Year of construction: 1998, functionality: fully functional, Straight-line edgers Bodjwii D Rspfx Aafolc

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, Lisec FPS-25/20U2 2011 Lisec gas press 2000 x 2500 mm Right -Left Bedpfx Aevy Ef Hjafslc S-IGL-1892

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, automatic gas press Blsdpfsyf E S Isx Aafjc Left-Right cy 2007 reconditioned in 2022 very good and clean condition

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (by phone at ...). Bjdpjyfvgpefx Aafjlc Model: CO S-WAY AD190S40/FP4x2 Beverage Box Body with Swing Wall and Tail Lift. Tail Lift: BÄR BC 2000 S4-C4 (2,000 kg). Body: BÖSE. Body dimensions (internal): approx. 6,800 x 2,470 mm (designed for 16 Euro pallets). Side passage height approx. 2,100 mm. Continuous side walls. Full roof retraction possible when open. Bulkhead allows smooth loading through. Speed limiter: 90 km/h. Front headlights: halogen. Cab: AD with flat roof. First aid kit, plastic bumper, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, manual cab tilting mechanism, front headlights halogen, black decorative film on doors, rear cab wall without window, AD cab with flat roof, front underrun protection for chassis with gross weight over 7,490 kg, first aid kit, plastic bumper, cab attachments black, unheated windshield, exterior mirrors electrically adjustable and heated, standard cab roof insulation, flat roof in white, rear air suspension, Hi-TroniX 12TX 1810 TD, front axle air suspension, 2 wheel chocks, generator 2,160 W (24V x 90A) – recommended for tail lift operation, rear shock absorbers, chassis frame in grey, steel air tanks (number depending on suspension and trailer version), front stabilizer, exhaust pipe to the left, emission standard EURO VI E, ride height with second setting, rear frame overhang: 2,388 mm, fuel tank: 290 L aluminium, AdBlue tank: 50 L, rear axle ratio: i 3.36, heated fuel pre-filter with separator, preparation for toll system (OBU) including antenna and cabling on dashboard, no receiver, 4G connectivity box including TCO service contract, ECO-switch for changing from Power to Eco mode to optimize Total Cost of Ownership (TCO) via fuel-efficient engine and transmission settings, VDI (Vehicle Data Interface) for telematics (FMS) version 4.0, transmission software ECO-Roll (coasting function), driving style analysis (DSE), Adaptive Cruise Control (ACC), Lane Departure Warning System (LDWS), warning triangle according to ECE-27 regulation, warning beacon, Electronic Stability Program (ESP), Advanced Emergency Braking System (AEBS), Drive tires: 315/70R22.5, mechanical roof hatch, fog lamps incl. cornering lights, cab air suspension, transparent sun visor mounted outside on cab roof, leather steering wheel, air horn behind bumper (compressed air), luxury driver seat: air-suspended, heated, multi-adjustable, right armrest, lumbar and headrest, with integrated three-point seatbelt, fully automatic climate control, ashtray in centre console, front axle weight variant 8,000 kg/rear axle 11,500 kg (technically possible: 13,000 kg), heavy-duty rear stabilizer D 60 mm, battery master switch in cab, electrically operated, 2-cylinder air compressor 630 ccm, battery charging socket, terminals, trailer socket for 24V operation, 15-pin, tow hitch by Rockinger, trailer version for use with continuous braking system, rear cross member, D-value: 130 kN, 40 mm tow hitch, 130 kN, edge protection at frame end, Iveco DAB+ radio with Bluetooth, integrated microphone, Mini-USB/…

Condition: new, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel is happy to assist you by phone. Bsdsyfrn Aopfx Aafelc Iveco S-Way AT190S40/FP 4x2 Sliding Wall Box Body + Tail Lift Body: Böse, BODY DIMENSIONS: Length x Width internal approx. 6,950 mm x 2,470 mm, designed for 17 Euro pallets, internal side passage height approx. 2,100 mm, continuous side wall panels, fully retractable roof when open, Bär tail lift type BC 2000 S4 with a lifting capacity of 2,000 kg, platform height: 2,210 mm. Chassis: Axle configuration 4x2, 2 axles, rear axle drive, AT MY cab version, SX left-hand drive, European emission standard, 400 PS Cursor 9 engine (Euro VI), TX-12M 12-speed HiTRoniX automated transmission, permitted gross vehicle weight 18-20 t, SR single reduction axle, single axle, FP full air suspension, DIS-DIS disc brakes front and rear, STD standard use, CABINAT standard cab chassis, ON vehicle set-up, wheelbase 5,500 mm, tires 315/70R22.5. Equipment highlights: mechanical roof hatch, transparent sun visor mounted on the outside of the cab, painted cab plastic parts in cab color, auxiliary heater (diesel/water, 4 kW), bed with curtains, pneumatic signal horn behind bumper, on-board refrigerator, raised lower bed with safety net, continuous mattress (3-piece for AT/AS), 225 Ah batteries, electrical preparation for tail lift operation as per VEHH standard, axle load variant: front axle 8,000 kg / rear axle 11,500 kg (technically up to 13,000 kg possible), battery charging socket and terminals, Rockinger trailer coupling, version for continuous trailer braking system, rear axle ratio i 2.85, end crossmember D-value: 130 kN, trailer socket (24V, 15-pin), 40 mm trailer coupling, 130 kN, frame edge protection, warning beacon, side marker lights, reverse warning buzzer (switchable), white IC 194, documentation (user manuals), tires: GOODYEAR 315/70 R22.5, KMAX S GEN-2 (3PMSF), digital operating and maintenance manual, infotainment – 10" TFT display with integrated Driver Pal, leather steering wheel, fully automatic air conditioning, cab air suspension, roller sunblind for side window (driver and passenger), HI-Comfort driver seat – multi-adjustable, air-sprung, integrated headrest, integrated height-adjustable seatbelt, lumbar support, 3-stage heating/cooling, front LED headlights, rear LED taillights, fog lights with cornering/turning function, electric parking brake, axle load display in cluster, lane departure warning system (LDWS), adaptive cruise control (ACC), electro-hydraulic power steering. We are happy to provide you with a tailored leasing or financing offer on request. Mr. Seidel is available by phone for all further questions. More information can be found on our website. Errors, changes, and prior sale excepted! ESP, auxiliary heater, navigation prep. Cab: Local distribution Suspension: Air suspension...

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30000452, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill travel distance: 60 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 600 mm, table width: 210 mm, overall weight: 710 kg, table load: 200 kg, Equipment: documentation/manual, DECKEL FP1 – completely overhauled in 2012 by FPS (Germany), equipped with Heidenhain digital display, tool cabinet with accessories, and dividing head. Since the overhaul, the machine has seen very light use and is therefore in like-new condition. About FPS: Specialized in the complete refurbishment of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Overhauled (2012) – mechanically and electronically as new! LOCATION: Graz (Austria) Bledpfx Asxywhcoafsc IMAGES/VIDEOS: For additional photographs and videos of the machine in operation, please contact us. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished, with both mechanical and electrical components upgraded to the latest standards. A new CE-compliant control cabinet was installed in accordance with current statutory requirements (BGVA 3 / DIN-EN 60204-1, new machinery standard). During the overhaul, the control system, drive package, and drive motors were all replaced and brought up to date. The modernization also included the installation of a new, touch-safe control panel and new motor. Technical data: Operation: manual, with option for automatic positioning Control: 3-axis Heidenhain digital readout Spindle speed range: 40 – 2000 rpm (geometrically stepped, 16 speed stages) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: Vertical & horizontal extension 60 mm, SK40 Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg incl. angle table and milling head Footprint: 1600 x 1400 x 1750 mm (W / D / H) Equipment: Vertical and horizontal spindle Milling head manually swivels ± 90° Completely new electrics and drive packages Overhauled – mechanically and electronically as new Extras: Z-axis bellows Special paintwork Highlights: Heidenhain digital readout for precise operation During overhaul, entire control system, drive package, and drive motors were renewed Contact us to arrange a viewing appointment.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Pystymallinen suoran reunan hiomakone lasille Shiatti FPS Series 50, Pituus 9030 , korkeus muokattavissa max 3360 paino 3800 kg Blodsv Idpgopfx Aafsc Lasin koko min. 100 x 100 max 3000 x 3000 , lasin vahvuus 3-50 mm , timanttilaikat 3 kpl viistetimantit 2 kpl ,viistekiillotuslaikat 2 kpl kiillotuslaikka 2 kpl , ceriumoksidilaikat 2 kpl viiste ja 1 kpl pohja,. hiontamoottorit uusittu .

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm Blsdpjwc U Izsfx Aafec speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 80 mm Bodpfxevut Sde Aafslc number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic

Condition: used, Year of construction: 1994, machine/vehicle number: 940082, Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Bodpfouqc Hrsx Aafslc Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Condition: good (used), TOOL MILLING MACHINE - Deckel FP 3 incl. Heidenhain 3-axis digital readout - Machine with spindle brake motor - Travel X/Y/Z 500x300x400 mm - Automatic feeds on all 3 axes - Rapid traverse on all 3 axes - Heidenhain 3-axis digital readout - Speed range 40-2000 rpm - Swivelling vertical head with quill - Vertical-horizontal milling device - Tool holder ISO 40 - Drive power 3 kW - Rotary/tilt/swivel table - Coolant system - Machine feet - Machine documentation Blsdpfx Aaex Nh D Aefoc Dimensions: LxWxH 1.6x1.2x1.8 meters / Weight: 1500 kg Errors and input mistakes excepted.

Condition: excellent (used), Tool Milling Machine DECKEL FP 2 with new 3-axis digital readout from laboratory operation - Well-maintained original condition - Travel X/Y/Z 400x200x400mm - Digital readout 3 axes "NEW" Blsdpfx Aaex Hahuefjc - Swivel table – clamping surface 700x350mm - Spindle speed range 40 – 2000 rpm - Automatic feed / rapid traverse on all three axes - Tool holder ISO 40 - Vertical - horizontal milling device - Vertical head swiveling with quill - Coolant system - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg Subject to errors and input mistakes.

Condition: good (used), cutting length (max.): 3,600 mm, overall weight: 4,000 kg, Cutting length (max.) 3600 mm Blodpjwv Eiiofx Aafec

Condition: good (used), TOOL MILLING MACHINE DECKEL FP 1 - Travel X/Y/Z: 245-150-340 mm - Without vertical head / Machine was used exclusively for horizontal milling operations - Speed range: 95 - 1900 rpm Bodpsx A D Nfefx Aafelc - Dividing head - Automatic feeds on X & Y axes - Various collets and tool holders - Documentation included Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight: 600 kg Errors and omissions excepted

Condition: good (used), Year of construction: 1997, functionality: fully functional, total length: 8,000 mm, total width: 2,000 mm, total height: 2,700 mm, working height: 1,600 mm, input voltage: 400 V, overall weight: 3,900 kg, type of input current: AC, power: 9.4 kW (12.78 HP), Lisec gas filling press for maximum unit size 2500 x 1600 mm, year 1997, running direction left/right, consisting of: - RSVN-27/16, frame set section - RTVN-27/16MZ, measuring section for gas filling press Bledpfxsr Igmws Aafjc - FPS-25/16U, gas filling press for Argon - RTVB-27/16ST, gas filling press outlet conveyor the machine is in very good working order and is available from our stock in Hofkirchen/Austria Additional outlet conveyors are available as an option