Used Forging for sale (171)

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Djdpfxedzp S Rj Ac Nokh Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: good (used), total width: 375 mm, total length: 430 mm, total height: 95 mm, 2 magnetic Tables and 1 controll unit  Electropermanent magnetic clamping system Clamping all kind off jobs such as; Face milling, lateral drilling, Round bar facing and slots drilling Coupled parts machining ans forged parts machining Edge milling and chamfering Dkodpfswq Rutex Ac Nsh plates machining on right angle Flattening through drilling and pocket execution Seperate MCC Control box with quick connection Table Length: 430mm Table Width: 375mm Table Height: 95mm Number of poles:56 Length: 375mm Width: 430mm Height: 95mm Weight: 350kg

Condition: excellent (used), Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Dksdpfx Aew Tulgsc Nsh Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, overall weight: 8,000 kg, SPECIFICATION MODEL CBF-103L(2018) NO.OF FORGING STATION 3 PORGING LOAD(KG) 8000 MAX.CUT-OFF DIA.(MM) Ø12 MAX.CUT-OFF LENGTH(MM) 192 MAX.OUT.PUT.(PCS/MIN) 140 P.K.O. STROKE(MM) 15 K.O. STROKE(MM) 162 MAIN ENGINE (HP) 30 CUT-OFF DIE DIA.(MM) Ø45*59L PUNDH DIA.(MM) Ø53*200L MAIN DIE DIA.(MM) Ø75*200L MACHINE WT.(KG) 19000 Dedpjv Iakmefx Ac Njkh NORMAL SIZE OF BOLT(MM) 6-10 SHANK LENGTH OF BLANK(MM) 30-152

Condition: ready for operation (used), We can offer Sakamura cold nut formers models: NP 430, NP 440, NP 450, NP 460, NP 480 Diameter of bars from 4mm -33 mm All machines underpowered Djdpfov H Ap Aox Ac Nskh

Condition: ready for operation (used), Year of construction: 1984, Romanian Hot Former AMP 20 line Press Capacity : 220 tons, Forming section : 3, Forming load: 90 ToF, Bar Diameter: 14 to 25 mm, Part Outer Diameter, Max.: 35 mm, Cut-Off Length: 15 to 40 mm, Ram Stroke: 110 mm, Ejector Stroke: 55 mm, Dksdpfx Aetaui Ujc Neh Die Center Distance: 110 mm, Production Per Minute: 12 to 180 , Weight: 11 tons, Technical documentation: yes Movie underpower available

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Dkedpfslnlmvex Ac Nsh

Condition: excellent (used), Year of construction: 1982, total height: 5,600 mm, pressing force: 400 t, air pressure: 6 bar, distance between side stands: 650 mm, distance between stands: 1,600 mm, stroke length: 280 mm, table length: 1,600 mm, table width: 1,120 mm, Trimming press in working condition: Nominal force: 400 ton Dkjdpfxeubyrxe Ac Njh Stroke: 280 mm Number of strokes per minute: 36 1/min Table size: 1 600 x 1 120 mm Slide size: 1 435 x 960 mm Main electric motor: 37 kW Overall dimensions: - Length: 3 010 mm - Width: 2 135 mm - Height: 5 600 mm Total weight: 50 000 kg.

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Dkodpfxjmza S Es Ac Noh Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Year of construction: 2000, condition: used, OMSG brand ROTOFLOW 170-N drum shot blasting machine with automatic feed tower, year 2000 Used drum shot blasting machine Continuous belt shot blasting machine for shot blasting of aluminum, brass or steel forgings, screws and bolts. Automatic feed tower. Inverter turbines Special valves with two positions Filter. Djdpfxjt Ag Udo Ac Nokh

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, National Machinery 750 S3 Operational - Working 5 FORGING STATION Dkjdetnhp Rspfx Ac Njh Supplied with control process and soundproof cabin Machine Size: 750 S3 Number of dies and punches: 5 Total heading load (kN): 2730 Number of strokes/min. (min/max): 90 Cutoff diameter: 22 mm. Cutoff length (min/max): 4,75/80 mm. Kickout stroke - die (min/max): 19/100 mm. Kickout stroke - punch: 52,4 mm. Motor size (kW): 55 Net weight (kg): 41.500

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, Tipping ram: Hyva, chrome-plated tipping ram matel - stroke 7100 mm - tipping warning signal, connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) screw connection - female! Cranked aluminum chassis, aluminum body with tunnel, steel support legs, SAF off-road axles, 1st axle lift axle, 6x 385/65 R22.5 Bridgestone RT tyres, 1 towing hitch, round LED rear lights, 2+1, quick-release tarpaulin lock. Toolbox, removable step ladder, 2 shovel holders (outside), 25L water tank, ASW in front cargo area, pneum. Vibrators at the front of the floor with control valve on the left side, grain bunker with brackets on each grain chute lBin smooth side walls - Double-walled longitudinal hollow chamber profiles - Vertical gradient inner thickness (3 mm at half height) - Inner length 9.50 m - Inner usable height 2200 mm - Inwardly beveled top chord profiles, floor trough with tunnel - Floor thickness 5mm, Inside usable width (mm) 2410, floor reinforcement struts - Doubling of the top chord profiles - Front wall 14° sloping front wall - Thickness 4mm - Conical recess and reduced to 450mm interior space Door Universal door - Double linkage locks - Folding upper crossbar - 2 door leaves - 1 grain slider with protective cover in each leaf - Rubber seal on the leaves and on the rigid frame, Door wing type Smooth-walled door wings Continuous welds on the inside of the door, roller tarpaulin system - White transparent strips - Side tensioning straps - Round aluminum roof bows (100mm spread) - Rounded upper part, hinged, adjustable, removable, foldable on the side - Aluminum forged MULTIFUNCTION Tarpaulin stops (straight - offset - foldable), Tarpaulin pole Yes Half locking bar - Door lock Pneumatic automatic unlocking of the swing frame with 4 hooks Upper door hinge Swing flap upper aluminum Double ratchet - Removable Integrated in the side wall height Grain pusher Right & left (aluminum) Dsdert N Sfepfx Ac Nekh

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Dodpfx Asuzhmtsc Nokh Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, Tubend horizontal bending machine HP 40 Pressure: 40t Stroke: 300mm Max. tool height: 250mm Flat bars over the high edge: 200 x 24mm Flat bar over the high edge: 250 x 16mm Working speed: 10,0mm/sec return speed: 10,0mm/sec table: 600 x 1200mm Total power requirement: 4 kW Motor: 400 Volt 50Hz weight: 1190 kg dimension L-W-H: 1250 x 650 x 1300mm Oil capacity approx.: 40,0l Equipment: Hydraulic horizontal bending machine Solid working surface made of stabilized steel Machine made of hardened and ground forged steel NC touch screen control 1x set of tools Dodpfx Aoi Elunsc Nekh Double foot switch

Condition: used, Year of construction: 2023, _____Technical specifications: Hydraulic headland lift HLCWorking width: 8.70 metersWidth in working position: 9.10 metersNumber of rotors: 8Number of tine arms per rotor: 6Transport width: 2.99 metersTransport height: 3.35 metersGrass deflector above the tine coilsRigid spreading angle adjustmentRotor drive: DIGIDRIVE finger clutch made of forged, case-hardened steelFreewheelTires of the two middle rotors: 16x6.50-8Tires of the outer rotors 16x6.50-8Attachment: Three-point attachment Cat. 2Attachment framePivot head trailing cleaning devicePivot head damping: 2 mechanical vibration dampers1 DW control unitPower requirement at the PTO (kW/HP): 36/50Lighting system with warning signsStorage location: null Dkjdpforgz Uyjx Ac Njh

Year of construction: 2023, condition: new, Industrial heavy duty trailer with a payload of 30 tons on 60% of the loading area at 6 Km/h. The trailer has heavy duty Vulkollan drums with a height to loading area of 510 mm. The loading area has the dimensions 6000 x 2400 mm. The transport floor is lined with 40 mm spruce The steering is all-wheel steering and the drawbar is 1600 mm long with drop safety device and forged towing eye with hole 40 mm. On the outer frame there are 6 stops for securing the load on each long side. The paint is in RAL 2000 or 2004 in new production gladly on customer request. Dksdpfxokz Uyue Ac Njh

Condition: new, Tubend Horizontal Bending Machine HP 20 Description Pressure: 20t Stroke: 200mm Dkodpoi Elvhefx Ac Nsh Max. tool height: 200mm Flat bar over high edge: 200 x 12mm Working speed: 10,0mm/sec Return speed: 10,0mm/sec table: 550 x 1100mm total power requirement: 2,2kW Motor: 400 Volt 50Hz weight: 640kg dimension L-W-H: 1220 x 600 x 1220mm Oil capacity approx.: 12,0l Equipment: Hydraulic horizontal bending machine Solid working surface made of stabilized steel Machine made of hardened and ground forged steel NC touch screen control 1x set of tools Double foot switch

Condition: new, Horizontal bending machine Fastech FP 40 Description - Pressure: 40t - Stroke: 285mm - Max. tool height: 250mm Dodpfjfg Eu Rjx Ac Nekh - Flat bar over high edge: 200 x 24mm - Working speed: 10,0mm/sec - Return speed: 10,0mm/sec - working height: 930mm - table: 660 x 1250mm - total power requirement: 4,0kW - Motor: 400 Volt 50Hz - weight: 1100kg - dimension L-W-H: 1250 x 650 x 1250mm - Oil capacity: 40,0l Equipment: - Hydraulic horizontal bending machine - Solid working surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x set of tools - Double foot switch

Condition: new, Horizontal bending machine Fastech FP 20 Description - Pressure: 20t - Stroke: 185mm - Max. tool height: 200mm - Flat bar over high edge: 200 x 12mm - Working speed: 10,0mm/sec - Return speed: 10,0mm/sec - working height: 930mm - table: 480 x 1060mm - total power requirement: 2,2kW - Motor: 400 Volt 50Hz - weight: 530kg - dimension L-W-H: 1150 x 480 x 1200mm - Oil capacity: 12,0l Equipment: - Hydraulic horizontal bending machine Dodpfx Aefg Evdec Nskh - Solid working surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x set of tools - Double foot switch

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M04L/8718, Offer Number: M04L/8718 Machinetype: pointing and pincing machine Info: vibratory feeder Make: NATIONAL HARTFORD Type: FORGE-MATIC 2 F.M. Constr. year: 1980 diameter range: 12 mm shaft length under head: 120 mm output - pieces/min: 300 Location: In our warehouse Dksdpfowi St Ujx Ac Noh

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 diameter range: 10-24 mm Djdpfx Ajw Nxnwsc Njkh Forging power: 7-20 to thread length plunge method: 195 mm daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Location: Germany