Used Forging for sale (162)

Condition: good (used), Year of construction: 2005, machine/vehicle number: 12345, functionality: fully functional, Used hydraulic forging hammer Manufacturer: LASCO Type: HOU 250 SO Ibjdpfx Apezidv Socsb Year of manufacture: 2005 Impact energy 40 kJ, ram stroke 710 mm, ram weight 3,000 kg, machine foundation with spring damping elements, conveying system by STAHLMANN, two-module design, work platform, automatic feeding, infeed and outfeed, water cooling.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Ibsdpfezldwujx Apcsb Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: used, Year of construction: 1999, ram hammer weight 26 kg ram hammer stroke 200 mm type KO Ibedpfeqwpxbox Apceb 596 no. of strokes 220 Hub/min air hammer

Condition: used, Year of construction: 2008, operating hours: 12,183 h, machine/vehicle number: 1060142, turning diameter: 32 mm, spindle speed (max.): 5,000 rpm, overall weight: 4,000 kg, Frontal twin-spindle lathe for re-machining rough-turned parts produced by cold forging, turning, or sintering. Isdozhktzopfx Apcsbb Integrated dual-gripper robot for loading and unloading.

Condition: good (used), machine/vehicle number: 23027, Offer 23027 Technical specifications: Iodoi Dr Tbepfx Apcjbb - Top diameter / bottom diameter: 350 / 750 mm - Wall thickness (approx.): 45 mm - Base diameter: 750 mm - Height: 1380 mm - Total weight (approx.): 600 kg

Year of construction: 2009, operating hours: 89,479 h, condition: good (used), functionality: fully functional, Grinding robot for machining forged or cast water fittings, operating air pressure 5.5-6 bar, operating voltage 400 V-50 Hz, rated current 13 A, Ijdpfjzvn Tzsx Apcsbb rated power 8 kW, ongoing maintenance until 2026, extensive range of accessories.

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ Ibodpfxort Uc Ee Apcsb max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: used, Year of construction: 1970, pressure . t stroke . mm impact capacity 60-70 mkp Ibjdpoud Tp Nsfx Apcsb total power requirement . kW weight of the machine ca. 3 t dimensions of the machine ca. . m

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Ibjdpfezw A Rwjx Apceb Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Ibsdsubyrxepfx Apceb Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg.

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Iedpfxoyacyxj Apcobb

Condition: used, Year of construction: 1969, ram hammer weight 480 kg stroke 710 mm throat 550 mm impact capacity 1250 kpm no. of strokes 210 Hub/min ram hammer stroke 710 mm work height max. 720 mm total power requirement . kW weight of the machine ca. 7,4 t pressure 400 kg Steam drive No. 3065 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Iedpfxeyqur Is Apcebb About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] Ibjdeuhb Tkspfx Apcsb - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar Ibodeu Eb Niopfx Apcsb

Condition: used, Year of construction: 2012, temperature max. 1350 ° internal length of the oven 2800 mm internal width of the oven 2800 mm Ibjdpoytx Rmjfx Apceb internal height of the oven 1200 mm Loading 20000 kg dimensions 3,3x3,3x2 m Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Ibedpfjw Dgi Tsx Apcob Weight: approx. 600 kg Good condition

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Ibedpfxsw Tulgs Apcob Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: used, machine/vehicle number: 27742, type of input current: three-phase, pressing force: 200 t, table width: 1,200 mm, table length: 1,000 mm, ram plate width: 160 mm, distance table to ram: 500 mm, overall weight: 23,600 kg, distance between stands: 350 mm, ram adjustment: 100 mm, stroke rate (max.): 35 1/min, MINALI mechanical eccentric press model 2MI 200, 200 tons, high-rigidity double-column frame, Italian industrial construction. Robust and heavy-duty machine (approx. 23,600 kg), ideal for: Blanking Sheet metal stamping Ibodpfjyutk Dsx Apceb Bending Light deep drawing General mechanical operations Equipped with: Slide stroke 250 mm Ram adjustment 100 mm Table size 1200 x 1000 mm 35 strokes/min Main motor 20 HP Pneumatic system Centralized lubrication Pedal and push-button control Anti-repeat system Emergency stop Machine complete with original electrical cabinet and technical documentation.

Condition: excellent (used), Year of construction: 1978, Description to follow! Ijdpfx Aezl E R Ajpcjbb

Condition: good (used), Year of construction: 1985, Manufacturer: RADAELLI Model: 1000/S2 Year: 1985 Condition: Used Stock number: 0388 Press force: 1000 tons Press points: 2 Ram dimensions: 2,820 x 2,200 mm Table size: 3,150 x 2,200 mm Ram stroke: 500 mm Isdpeyrigpofx Apcsbb Die height at BDC: 1,000 mm Ram adjustment: 190 mm Strokes per minute: 15 spm Pneumatic cushion present

Condition: used, ram weight 1000 kg stroke 1000 mm throat 800 mm impact capacity 4200 mkp total power requirement . kW Steam drive The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ibjdpfx Aeyquf Ujpceb If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions: 1500x1500 mm Working height: 940 mm – height adjustable Feet are screwed on Plate thickness: 110 mm Hole diameter: 45 mm Weight: approx. 2.0 tons Iodpefpgp Ejfx Apcjbb

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 221005, functionality: fully functional, Technical Data – AICHELIN Pusher Furnace System Manufacturer: AICHELIN Type: DHLG-50/50/50 System Type: Gas-heated Pusher Furnace Year of Construction: 2012 (system) Control System: Siemens S7-400 Machine No.: 221005 Electrical Data Connected Power: 261 kW Rated Current: 383 A Supply Voltage: 400 V / 50 Hz Furnace Data Iedpfx Apozf Upnjcebb Heating: Natural Gas Max. Furnace Temperature: 500 °C Protective gas operation possible Continuous pusher operation Batch Data Max. Batch Weight: 10,000 kg Continuous heat treatment of large series components Application Area Hardening Tempering Stress-relieving annealing Preheating Heat treatment of forged and cast parts Gearbox and drive components Equipment Siemens S7-400 control system Automatic loading and pusher system Gas-heated industrial furnace Protective gas atmosphere possible Fully automatic series operation Typical Applications Automotive industry Forging operations Gearbox manufacturers Heat treatment companies Supplier industry Special Features Very high batch capacity of up to 10 tons Modern Siemens PLC control system Energy-efficient gas heating Suitable for high production volumes in 3-shift operation Ideal for the heat treatment of gearbox parts, shafts, gears, and forged parts This AICHELIN DHLG-50/50/50 is a modern industrial heat treatment system and is significantly more valuable than a comparable standard tempering or chamber furnace. The system is particularly interesting for forging companies, gearbox manufacturers, foundries, and contract heat treatment companies.

Condition: good (used), Offer 80216 Technical data: - Various pass-through openings, round and square - Length approx. 450 mm - Width approx. 450 mm - Plate thickness approx. 120 mm - Table height with base frame 720 mm Iodjzrvmnjpfx Apcjbb - Space requirement: W 500 x D 500 x H 720 mm - Weight approx. 120 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal Ibjdpfx Aszu Ryhjpcjb • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)