Used Folder Closer for sale (722)

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: Hedpfjl Dpc Eox Ab Isk • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit Hoded Iq S Uspfx Ab Ijk • 4 buckle plates • noise prevention delivery • delivery SBP 46

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter 1st folding unit: Hjdpjdm U Dhsfx Ab Iok • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Year of construction: 2002, condition: ready for operation (used), Built in 2002 Size with continuous feeder max 660 x 1.280 mm Size cross fold min 150 x 200 mm Size threefold min 200 x 300 mm Speed max 180 m/min Length with continuous feeder 5.890 mm Width 2.340 mm Equipment: feeder: Hodpfx Aed E Nbqjb Iek • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • cross-fold knife • noise prevention 3rd folding unit: • third-fold knife • Lärmschutzeinrichtung peripheral units and deliveries • stream delivery with pressing station -- optionales Equipment:--not included— • gate fold buckle plate

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control • counter Hsded A Hcvspfx Ab Ijk 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates Hjdpfeddh Evjx Ab Iek • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: good (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 262061, control type: manual, degree of automation: manual, actuation type: manual, working width: 1,000 mm, installation height: 130 mm, sheet thickness (max.): 2 mm, overall weight: 380 kg, total length: 750 mm, total width: 1,540 mm, total height: 1,265 mm, Standard equipment Patented eccentric quick-clamping system for tool change on the upper and bending beam with just one hand movement Two-stage upper beam drive for two different tool heights Gooseneck rail, 130 mm high, 30°, sharp, clearance 26 mm, foot width 41 mm, free passage 110 mm, segmented incl. corner pieces, 700 N/mm² Lower beam rail, segmented, plug-in system with corner pieces, 700 N/mm² Bending rail 15 mm, segmented incl. corner pieces, 700 N/mm² Tool segmentation for 1000 mm: 30/50/70/100/150/200/300 mm + 2 x 75 mm corner pieces, for greater lengths additionally 250 mm segments Hjdpjywfq Nofx Ab Isk Upper beam stroke 110 mm Bending angle display Foot pedal mechanism for opening and closing the upper beam

Condition: as good as new (ex-display), functionality: fully functional, Very nice folding machine for sale. The fastest tabletop model – 260 sheets per minute. Automatic plate setting and 10 job memory slots. 500-sheet feed tray for A3/A4/A5-A6. User-friendly control panel. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Hjdpoywcccefx Ab Iok Ask for a price including transport (location: the Netherlands). Regards, Henk Hoos.

Condition: excellent (used), Motorized folding bench, swing bending machine, bending machine (used) Manufacturer: GEKA Model: MA 200 Year of manufacture: 2003 Working length: 2040 mm Max. sheet thickness for St 37: 3 mm Max. sheet thickness for Al, Al Mg 3: 4 mm Max. sheet thickness for V2A: 2 mm Opening width of the upper beam: 180 mm Hsdpfx Abeyvuh Uj Ijk Adjustability of the lower beam: 60 mm Max. bending angle: 135° Backgauge, mechanically adjustable by hand: 0 – 750 mm Weight of the machine: approx. 2600 kg Drive power: 3 kW Required space (L x W x H): 3600 mm x 2000 mm x 1400 mm The machine comes from a research center and is in very well-maintained condition. Forklift available for free loading onto truck Affordable shipping available Location of the machine: 48477 Hörstel

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Machine features: - Schechtl MA folding/bending brake - Bends cleanly – test available - Angle indicator - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Hedpfx Aex Rupheb Iek Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Inspection and testing can be arranged by phone and are expressly encouraged. Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 854 h, year of last overhaul: 2025, Equipment: documentation/manual, Offered direct from first ownership: ----- THALMANN Double Folding Bending Machine – Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT system ----- The machine was purchased new from Thalmann in 2020 and installed in our sheet metal workshop in 2021. With only 854 recorded pump hours, it has seen very little use and is therefore in excellent condition. The reason for sale is simply due to insufficient utilization of the machine. It can be inspected and tested at any time in the Munich area. Manufacturer: Thalmann Model: TD 150 - 6.4M Year of manufacture: 2020, 854 pump hours Condition: Excellent Category ID: 1472 Type ID: 1258 Machine type: Panel Folding Machine Hedpfxjyu Sbns Ab Iok ---- Included additional equipment: - Freely running cutting unit, 1.5 mm steel, 1 unit - Curved clamping beam, ratio H x D = 1:2, 1 unit - Additional gripper/stop finger unit, 3 units - Clamping beams made from high-strength HARDOX steel, 1 unit - Hydraulic material thickness adjustment, 1 unit - Automatic sheet loading and handling table, 1 unit - Automatic sheet turning device, 1 unit - M-Guard remote maintenance support (instead of TeamViewer), 1 unit - LED bending line illumination with RGB color selection, 1 unit - Machine delivery, installation, and initial instruction, 1 service unit ----- If you have any questions or need more information, please feel free to send us a message or call us.

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Complete with: J shape back gauge Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Standard ‘sharp’ upper tooling – 3x lengths 845mm Bottom tooling single length – 1x 2.54m length 10mm wide Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length Hedpfx Abogd Dgqj Iok 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Tool cart supplied

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Hedjw T Sc Ajpfx Ab Isk Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm Hsdjn Tnzfspfx Ab Ijk CNC Auto Bending Machine (Year 2012) Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Used 6metre Ras up and down bend cnc folding machine for sale Ras XXL Centre 75.06 System 9002 cnc control RAS TECHNICAL DATA: DIMENSION 75.06 Max. Sheet thickness (Steel 58000 PSI) gauge 16 Max. sheet thickness (Aluminium 29000 PSI) gauge >14 Max. sheet thickness (Stainless Steel 109000 PSI) gauge 18 Working length max. inch 251,97 / 6.4metre Grippers Travel Range inch 0,47 – 29,53 Grippers Positioning Accuracy inch +/- 0,004 Distance between 2 Grippers min. inch 7,09 Stops and Grippers Quantity 8 Free Space in front of the folding be-ams up to degree 300 Working Height inch 37,40 Machine Width inch 59,05 Machine Length without contori cabinet inch 257,48 Machine Height inch 70,87 Weight approx.. lbs 27 600 Compressed air bar 5,5 Drive Power Upper Beam hp 2,95 Drive Power Upper Folding Beam hp 2,95 Drive Power Lower Folding Beam hp 2,95 Speeds: Upper and Lower Folding Beam degree/s 126 Upper Beam inch/s 13,78 Grippers inch/s 13,78 Max. sheet thickness (Steel 400 N/mm2) mm 1,5 Max. sheet thickness (Stainless Steel 750 N/mm2) mm 1,25 Max. sheet thickness (Aluminium 200 N/mm2) mm 2,0 Working length max. mm 6400 Grippers Travel Range mm 12-750 Grippers Positioning Acuracy mm +/- 0,1 Distance between 2 Grippers min. mm 180 Stops and Grippers Quantity 8 Free space in front of the folding beams up to degree 300 Working Height mm 950 Machine Width mm 1500 Machine Length without control cabinet mm 6540 Machine Height mm 1800 Weight approx.. N 125 000 Hsdpfx Asgpk R Esb Iek KG 12 500 Compressed air bar 5,5 Drive Power Upper Beam kW 2,2 Drive Power Upper Folding Beam kW 2,2 Drive Power Lower Folding Beam kW 2,2 Speeds: Upper and Lower Folding Beam degrees 126 Upper Beam mm/s 60 Grippers mm/s 350 Ideal for the manufacture of roofing products

Condition: used, Used RAS 62.30 Turbobend CNC Folder Used RAS 62.30 Turbobend CNC Folder Year 2014 Sheet thickness 2mm, Working length 3,200mm back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories Hsdpfxofuakyj Ab Iek

Year of construction: 2002, condition: refurbished (used), Used refurbished Salvagnini P4 panel bender / cnc folder for sale complete with sheet metal loading system Salvagnini P4 PERFORMER refurbished in 2012 for sale – Made in Austria: Specification – new / year 2002 – machine revised in 2012 Max Bending Length 1850mm Max width of finished Panel 1500mm Max Diagonal of incoming sheet 2150mm Max length of incoming blank 2000mm Max width of the blank 1500mm Max bend height 127mm Max thickness of material at 400 N/mm2 (m/s) 2mm Bending angles obtainable -125 Degree to +125 Degree Total machine hours on 23,000 Sheet metal load and unload system: Configuration ADP 2715 SAP 211618 POS P4.1812 Servo-controlled panel bender Upper Bending blade Lower Bending blade Chiller Used Salvagnini machines wanted and for sale, models such as: S4 –30 Auto load/unload Punching,Salvagnini P4 2512 ALA Panel Bender, Salvagnini P2 Performer Panel Bender, Salvagnini S4.30,Salvagnini P4.2512 Panel Bender,Salvagnini P4.2512,P4 2516ABA, Salvagnini P4 1712, Hedpfx Ajgu Dynob Iek Salvagnini P4 2112 HPT Panel bender,Salvagnini P2 Performer Panel Bender, Salvagnini P4.1712, Salvagnini P4.2516ABA Automated Panel Bending System

Year of construction: 2016, condition: excellent (used), Used modern, very clean & fully serviced RAS UpDownBend 78.40 cnc Folding System for sale 4metre up and down cnc folding machine with U shape back gauge as highlighted per photograph Year 2016 Technical Data: Material Thickness max. (Mild Steel) 3.0mm Material Thickness max. (Stainless Steel) 2.0mm Material Thickness max. (Aluminium) 4.0mm Working Length 4060mm / 4metre Gauging Depth ("U" shape) 95-3270 (4150)mm Stop Finger Units (fix - telescope - fix) 2 + 10 + 2 Gauging System Accuracy -/+ 0.1mm Open Height Upper Beam max. 600mm Telescopic Gauging System (Travel Range) 640 – 1520mm Pivot Point Adjustment +/- 15mm Folding Beam Height Adjustment 150mm Folding Beam Travel Range 180 deg Working Height 1000mm Hodpfx Asnnz Apob Iok Speeds: Upper Beam 75mm/s Folding Beam 110 deg/s Gauging System from min to max 2.2s

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, BOBST PHARMA 36 folding and gluing machine Year of manufacture: 2001 on plate EDIGRAPH S.A. Factory number: no nameplate Glue system: on the wheel - 1 pt. Pena technical documentation Machine connected, possibility of testing. Condition: very good Hsdpeubztkjfx Ab Ijk

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Hjdpfx Ajxwcwwob Iok Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: good (used), Year of construction: 2007, control type: manual, You are bidding here on: a branded machine - folding bench, from a very reputable and well-known manufacturer - Schechtl. Device features: - Schechtl HA folding bench - Rail bends cleanly – test possible - Degree indicator - Bending length approx. 310 cm - Sheet thickness: 1.5 mm for steel – more for aluminum, zinc, etc., up to 2 mm - Standard rail - Foot closing device - Sheet support - Optional roller shear with rail – see photos Hedjytz A Espfx Ab Iek - 2024 price list (net) – prices are now significantly higher Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing – including folding benches, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, roll sets for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. Please don't hesitate to contact me if you have any questions. You will receive an invoice in accordance with § 25a UStG – VAT is included in the invoice amount. 2024 price list – prices have already increased noticeably. Differential taxation applies. Free loading possible – weight approx. 2,000 kg. Inspection and testing are possible and welcome by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise, we are happy to advise you. Collection by the buyer themselves (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: folding bench HA 310.

Condition: good (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, ETERNA 1620 SAL Extra ref 2950 year 2014 maximum sheet size: 1200 x 1620 mm material: Corrugated board Fala E, B, EB, BC vacuum feeder extended feeder with sheet alignment section – mechanical register cleaning section batch delivery Hsdjytum Ropfx Ab Isk clamping force: 400 tons

Condition: used, functionality: fully functional, Year of construction: 2016, actuation type: pneumatic, sheet thickness (max.): 3 mm, overall weight: 6,700 kg, total length: 5,700 mm, total height: 2,313 mm, input current: 400 A, type of input current: three-phase, working length: 3,200 mm, Equipment: CE marking, We are offering for sale a very well-maintained Schröder PowerBend Professional 3200/3.0. The machine is in excellent condition and is immediately ready for use. • Year of manufacture: 2016 • Working length: 3,200 mm • Usable length: 3,240 mm • Machine depth (with rear stop 1,600 mm): approx. 3,223 mm • Bending beam adjustment: up to 150 mm • Bending center adjustment: approx. ±20 mm • Machine height (with gantry): approx. 2,313 mm • Bending capacity: 3.0 mm (Rm 400 N/mm²) • Rated power: 12 kVA Hjdpfx Asytnvreb Isk • Pneumatics: 6 bar • Weight: 6,700 kg • Stroke: approx. 500–540 mm • Number of bends so far: approx. 310,000 • Location: 49170 Hagen a.T.W. The control system was recently renewed and is up to date. The machine is fully operational and can be inspected by appointment. Other information: Sale as seen Inspection and collection in Hagen a.T.W. by arrangement Location: Hagen a.T.W. Sale by company → without warranty or guarantee, subject to prior sale and errors.

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Hedpfx Aeqxandsb Iek Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: new, Year of construction: 2025, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Hedpfxsv Tyr Ie Ab Iok Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2