Folding Machine

MBO K 800-1 S-KTL/4

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys Fodpfx Ahovpaubs Esgi 1 x OMG stacker delivery

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, Kolbus DA 270 Used hardcover production machine for book covers, file cases, calendar backs, or games Year 2010 Standard equipment Cardboard pre-stacking belt Sheet feeder for non-stop operation Fault monitoring during gluing Utility cylinder with grippers and interchangeable die plates External glue application Unit for padded covers Automatic cover counter Programmable automatic settings, motor-driven adjustments Speed up to 65 cycles/min Unit for processing roll spine material Heated glue application rollers and doctor blade Viscosity control unit for automatic water supply to ensure consistent glue viscosity Unit for mirror gluing with hotmelt Board spine magazine Small format unit Large format unit (height) for open cover format of max. 670 × 405 mm Large format unit (width) for open cover format max. 678 × 390 mm, width max. 718 mm Corner trimming device (manual operation) Fgedpfezxdhmsx Ah Eji Unit for processing asymmetric covers and sheets Unit for processing thin boards Optional equipment for viscosity control unit Available in stock

Condition: used, Year of construction: 2004, Case maker Kolbus DA 270 Year: 2004 Description: - Digital display - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube Fgsdpfx Asyym Uboh Eoi - Viscosity control - Device for producing padded cases - Pressing station - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Max. mechanical speed: 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2005, Format: 320 x 480 mm Equipment: Quality control: Semko Fgedpoyxqvmjfx Ah Esi ASIR III Feeder: Number of feeder: 9 x 370 cover feeder 1x 1529 Card adhesive: 1x 423 AMRYS - Automatic Make Ready System Stitching unit: Typ: Prima Plus Amrys 390 2x stitching heads AMRYS - Automatic Make Ready System Delivery: Typ: Rapido 7525 year: 2001 serial number: MMZO 490 194 Display direction: left Technical data: Format min: 90 x 105 mm Format max: 320 x 480 mm Maximum mechanical speed: 14,000 cycles/hour. Three-knife Typ: Mueller Martini 449 AMRYS - Automatic Make Ready System

Condition: excellent (used), Year of construction: 2010, KOMORI LITHRONE S-529 M C 66 million Year: 2010 Max. sheet size: 530 x 750 mm Max. print area: 520 x 736 mm Min. sheet size: 200 x 360 mm Substrate thickness range: 0.04 – 0.8 mm Max. production speed: 16,000 sheets/h *PQC-S remote control system (Quality Control System) for printing Fjdpfj Ah Sbxex Ah Eegi ▪️Remote ink control ▪️Remote dampening control ▪️Remote register control *KHS-AI® computer-controlled machine management system ▪️Intelligent inking system ▪️Machine self-diagnostic function ▪️Advanced CIP4-based information flow management ▪️Module for connection to a scanning unit * Touchscreen monitoring * High-Speed-Start system * Densitometric scanning unit * Automatic blanket cylinder washing * Automatic inking unit washing (dual nozzles for solvents and water) * Automatic impression cylinder washing * Remote substrate thickness adjustment from the control console * Remote substrate format adjustment from the control console * Semi-APC (Semi-Automatic Plate Change) system * Stream feeder with an 800 mm pile height * Feeder head equipped with lifting suckers (2x) and forwarding suckers (2x) * Deionizing air blast at the feeder head * Side air blasts * Pile support table for manual pile preparation * Table • Stream feeder with additional suction tapes * Electronic feed control * Electronic front-lay (register mark) control * Skew control via front-lay bar * Optoelectronic sheet-flow monitoring from the feed pile * Ultrasonic double-sheet detection (ULTRASONIC) * High-precision impression cylinders * Reduced number of transfer cylinders * Solid-construction transfer cylinders * Accessible plate cylinder * Accessible blanket cylinder * Chrome-plated impression cylinder * Cylinder designed for high-load/heavy-duty applications * Diamond-coated transfer grippers * Precision ink-feed adjustment (500-step ink-fountain key opening) * Inking unit featuring 19 rollers, including 4 oscillating/distributing rollers * Anti-ghosting roller (B and D positions) * Independent drive for the ink-fountain roller (ductor) * Adjustable ductor dwell time * Remote control of ink zones via the PQC-S console * Option to disengage the inking unit on the first or fifth printing unit KOMORIMATIC Dampening System * Dampening system suitable for both alcohol-based and alcohol-free printing * Oscillating roller for uniform dampening solution distribution, preventing ghosting and streaking * Rotational speed reduction • Continuous cleaning of the printing cylinder (or flat cylinder surface) based on the type of soiling * Integrated sensor * Pneumatic engagement and disengagement of rollers, controlled from the operator console * High-pile delivery (stack height: 900 mm) * Sheet decurler * Deionizing bar * Automatic lubrication for delivery chains * GRAFIX powder spray system o Automatic adjustment for printing speed o Automatic format compensation * Engagement and disengagement of dampening rollers * Engagement and disengagement of inking rollers Coating unit with TRESU chambered doctor blade system o Suitable for water-based and UV coatings o Remote register adjustment: ▪️ Lateral ▪️ Circumferential ▪️ Diagonal (adjusted at the transfer cylinder) o Remote adjustment for substrate thickness o Extended delivery: 2,000 mm o Special gripper bars – shadow-free (prepared for the installation of UV dryers) o Designed for tool-free mounting of rubber or photopolymer plates * Chambered doctor blade system

Condition: good (used), Year of construction: 1992, The James Burn BB32/37 is a semi-automatic wire binding machine with a working width of 320 mm and closes wires of all diameters from 1/4 inch to 1 inch in both 2:1 and 3:1 pitch. With the BB32/37 you can bind up to 1,800 books per hour. The machine is equipped with closing tools for all diameters. Compressed air is required for operation. Fjdsxdfb Sspfx Ah Eogi

Condition: used, Year of construction: 2009, Format: 660 x 1040 mm Equipment: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Fedpfey Tacrsx Ah Eegi Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Condition: good (used), Year of construction: 2005, 1 x used gatherer Manufacturer: Müller Martini Model: Prima S Year of manufacture: 2005 Condition: good, in production, can be inspected Configuration: 6 x stations with undercarriage 4 x standard feeders 1 x folding feeder 1 x card gluing feeder 1 x stitching unit with 2 stitching heads HK75 1 x three-knife trimmer (without trimming cut) 1 x Semko thickness measurement 1 x automatic bundle delivery system Palamides delta 703 Fsdpfx Aez Rv S Tsh Ejgi

Condition: good (used), Horizon BQ-270V Perfect Binder Machine in very good condition. In addition, the machine is equipped with the DV-270 unloading module. Ready to work. Very low mileage. Manufacturer’s description: Professional binder for perfect softcover. Fully automatic binder with an exceptionally stable type of construction, equipped with a hot glue gluing device, effective also for small and very small quantities of legs or sheets. The Horizon BQ-270V binder is a single-jaw machine with automatic cover feeding, which, operated by one person, delivers impeccably bound books in consistently high quality. Standardly equipped with a scanner measuring the thickness of the insert, it allows you to glue books using the „on demand” technology. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm with a maximum number of copies up to 500 books/hour. Factory-built cutter with additional cutting knives. Fgedpfx Ao Ah Dbueh Esi Maximum milling depth up to 3 mm. Automatic cover feeding using a suction drum with a certain, constant setting relative to the bound sheets. A factory-built installation creating 4-fold creases on the cover, which is set automatically with precise adjustment. As an option, 6 creases can be installed for gluing books with bookmarks

Condition: excellent (used), Year of construction: 2011, Duplo DC10/60i collating machine • Stations per tower: 10 stations • Loading capacity per station: 65 mm • Processing speed: Up to 10,000 sets per hour for collating only; up to 5,000 brochures per hour in a system combination. Duplo DBM 500 • Paper formats: Min. 105 x 148 mm to max. 350 x 610 mm (or 356 x 508 mm depending on the specific system configuration). • Paper weight: Fine quality paper from 52–157 g/m²; covers/card stock up to 300 g/m². • Processing speed: Up to 5,000 brochures per hour (e.g., in A5 format). The speed dynamically adjusts to the format (approx. 4,600/h for A4, approx. 4,000/h for A3). • Capacity (thickness): Staples sets up to 5 mm thick (approx. 50 sheets at 80 g/m² paper) and folds up to 25 sheets. Fgsde Ah Tlrjpfx Ah Eoi • Paper formats: • Width: 120 mm to 356 mm • Length: 170 mm to 500 mm (or up to 508 mm in the Pro system) • Stapling heads: Standard equipped with 2 Hohner stapling heads, expandable to up to 4 heads for multiple or dual-purpose production. Duplo DBM500T • Processing speed: Synchronized with the DBM-500 booklet maker (up to 5,000 brochures per hour). • Trim width: Can remove between 1 mm and 20 mm thickness in a single cut on the front edge. • Booklet thickness: Trims booklets with a thickness of up to 5 mm (which corresponds to approx. 50 sheets / 200 pages at 80 g/m²). • Paper formats (input after folding): • Width: 120 mm to 356 mm • Length: 85 mm to 250 mm (final format of the folded booklet)