Used Folder Creaser for sale (663)

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Gbodpfxetq E U Se An Rsl Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: like new (used), Morgana Autocreaser 33 automatic creaser The device is in very good condition. A modern device that allows you to create a crease (groove), thanks to which we can bend paper or other materials more easily. Sheet size 330x900mm Weight: 400gsm programmer Godpfx Aoyxryysn Rebl Weight: 150kg Manufacturer: Morgana, UK Image Creasing: Yes Creased materials: paper, cardboard, cardboard

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, operating hours: 4,624 h, control type: CNC control, sheet thickness steel (max.): 2 mm, year of last overhaul: 2012, In 2012, Salvagnini carried out a complete overhaul! TECHNICAL DETAILS Maximum feed-in length: 1,850 mm Gbjdpfx Ansy Ey Ixo Rol Maximum feed-in width: 1,500 mm Minimum length: 285 mm Minimum width: 190 mm Maximum diagonal: 2,150 mm Maximum discharge width: 1,500 mm Maximum reference dimension: 2,000 mm Minimum sheet thickness: 0.50 mm Maximum sheet thickness, mild steel (max. 410 N/mm²): 2.00 mm Maximum sheet thickness, stainless steel (max. 600 N/mm²): 1.25 mm Processing of pre-painted material: 3.00 mm Maximum tool length for CLA option: 1,000 mm MACHINE DETAILS Control type: CNC control Operating hours: 4,625 h EQUIPMENT LS Upper bending blade LI Lower bending blade Manual sheet holder length adjustment CLA Long tab bending unit HP12015 R81 Cooling unit

Condition: used, functionality: fully functional, Year of construction: 1996, Used 3 meter CNC folding machine from RAS Gbodpfoy R N Tbsx An Rjl Model: 61.31 Capacity: 3150 x 1.5 mm CNC backgauge 4000 CNC control

Condition: ready for operation (used), Year of construction: 2019, We have here a Pitney Bowes F700 also known as Relay 7000 envelope inserting system available. This machine is year 2019 and only has done 1.763.359 envelopes. Works without any problem after we have tested it fully. Configuration: Gjdpfxey R A D Ts An Robl 2 main feeders - high capacity feeders 4 docoument feeders - with the extra feeder trays you can switch between documents and folded inserts Folding station Envelope inserting module and station.

Condition: good (used), Foellmer 45 ME Creaser The machine is in very good technical and visual condition. One owner since new. This is the newest model, currently in production. The machine has a working width of 450 mm. 380V power supply. Gbsdsy Nzlaspfx An Rjl Equipment includes a creasing bar, front margin, and side margin. This creaser is recommended for larger runs. It is quiet and powerful thanks to its geared motor drive. It is operated by a foot pedal.

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Gsdjy Nzk Nepfx An Rebl Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: good (used), Bacciottini Pit Stop AF High Speed ​​Automatic Creaser Fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the option of adding material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Gedsy Nzkvjpfx An Rebl Machine with an enlarged format up to 1000mm. Technical data: Maximum sheet size: 500×1000 mm Min. sheet size: 100×150 mm Maximum speed (for A4 format): 10,500 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 233 kg Dimensions: 170 x 85 x 120 cm

Condition: used, functionality: fully functional, Year of construction: 1988, Hydraulic Swing Bending Machine Make: RAS Model: 74.30, 3200 x 4mm Year: 1988 Technical Data Brand: RAS Year of manufacture: 1988 Model: 74.30 Working length: 3200 mm Capacity: 4 mm Stroke: 400 mm Motor power: 7.5 kW Dimensions: approx. L 4.5 x W 2.0 x H 2.50 m Weight: approx. 5.8 t Gjdpfjy Nx Ixjx An Robl Equipment • CNC-controlled backgauge 1500 mm • Multibend 8000 control system • Motorized adjustment of the bending beam • Foot switch • Tools: - 3 sharp rails - 2 bending rails, 15mm and 30mm All data provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, FOLDER STAHL TI 40/43 COMBI Gedpfx Ansy R Sv Se Robl Year 2005/2002 Condition: as new

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, Counterweight in large protective housing Godpfxsy Rxn Io An Rsbl

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Gbsdpfx Aowmk Ewsn Rol Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: new, Year of construction: 2026, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK Gbodpfx Anowd Emke Rol The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: good (used), functionality: fully functional, Year of construction: 1995, Folding machine with up to 2500 mm working length, maximum material thickness up to 1.5 mm. Gsdpfx Aey Rhtyon Rjbl

Condition: used, Used folding platen press Gjdjymr S Rspfx An Rjbl

Condition: excellent (used), Year of construction: 2023, Offer for Technofold 1100 SL with Gyro Specification: Machine speed: 350 m/min Step speed: 20 m/min Packaging width: 160-1100 mm Godpfx Anew Ec D Aj Rebl Machine dimensions: 22 × 1.88 × 1.5 m Machine weight: 9.2 t Max power consumption: 26 kW Air demand: 6 bar / max 10 m³/h Machine equipment: 4-6 point machine Gyro – rotating packages by 90° Side alignment section – left/right Pre-breaking section Automatic bottom section Servomotors, 4/6-point rear folding system Lower circular gluer left/right KQ cold glue system with 4 guns Final pressing and closing section Delivery section Ironing section with independent drive Pneumatic insertion rollers with SQUARING 2 alignment Tapping block – SPANKER Vacuum on the feeder + vibrator Camera with monitor on display

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. - Straight line gluing - 3-point gluing, crash lock, lock bottom Gedow H Rc Nspfx An Rsbl - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition

Condition: excellent (used), Year of construction: 1991, Available immediately 3 points 4 nossels Crash lock Godpfx Ansv E N R Do Robl 1/3 fold cd fold vibrator on feeder

Condition: ready for operation (used), Year of construction: 1995, VEGA 700 with 3 gluing points Max speed 400 meter per min Total KW 23.5 Max 770x550 Gjdpfxjwulmfs An Robl Description of the machine The length 10m , width 1.5m The machine can do 3 points of glue one lateral , and 2 points of glue by guns with cold glue for the lock bottom of boxes. HHS controller and spray nossels Three point Single point Crash lock Double wall Alignment 1/3 prefold

Condition: used, Format: 310 x 432mm Equipment: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold Godox N I Uhopfx An Rebl sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 10 h, control type: CNC control, We are offering a near-new ERBEND D-SFA 4230 CNC folding machine on behalf of one of our customers. This machine has less than 10 operating hours and is in absolute mint condition. A unique opportunity to acquire a high-end CNC folding machine without long lead times. Technical Specifications: This servo-driven folding machine is built for precision, speed, and flexibility: Working length: 4200 mm Capacity steel (S235): 3 mm Capacity stainless steel: 2 mm Capacity aluminium: 4 mm Machine dimensions: 2200 x 6100 x 2300 mm Machine weight: 11,800 kg Positioning accuracy: ± 0.1 mm Thanks to the servo drives and ball screw system, the machine guarantees high precision and reliability. Configuration & Equipment This machine is fully equipped and ready for immediate production: CNC control (Erfold 3D) with full 2D/3D programming and simulation Double bending system (upward and downward bending for higher productivity) U-type back gauge (4200 mm) with pneumatic fingers Integrated suction cups for stable sheet positioning Complete segmented tooling set (top & bottom) 200 mm high upper tooling with pneumatic clamping Gjdpey Idp Esfx An Rsbl Motorized CNC axis adjustments (A-B-D axes) Manual crowning system for optimal bending results Foot pedal with 3 functions + safety light guards Additionally equipped with motorized clamping beam and folding beam, ensuring fast and accurate processing Condition Less than 10 operating hours Fully operational and available for inspection under power No wear – in like-new condition Available immediately Applications / Industries This folding machine is ideal for: Sheet metal fabrication companies Roofing and façade cladding HVAC production Machinery and construction industry Interior and custom metalwork Both single-piece production and serial manufacturing The double bending capability combined with 3D CNC control makes it highly suitable for complex parts as well as efficient batch production. Why this machine? Like-new condition at a significant cost advantage No delivery time Fully equipped and production-ready Large working length (4200 mm) Proven ERBEND quality Interested or want to schedule a viewing? Contact us for more information or to see the machine in operation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Schroder, controller model: POS 2000, working width: 3,200 mm, folding beam adjustment: 300 mm, installation height: 1,737 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, overall weight: 4,380 kg, total length: 4,568 mm, total width: 2,450 mm, total height: 1,737 mm, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, 2006 Schröder SPB 3200 x 3.0 CNC Folder – POS2000 Control – Very Good Condition Machine Manufacturer: Schroder Machine Model: SPB 3200 x 3.0 CNC Folder Machine Type: CNC Sheet Metal Folder Year: 2006 Condition: Very good High-Quality Used CNC Sheet Metal Folder for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2006 Schröder SPB 3200/3.0 CNC Folder, a high-precision universal sheet metal folding machine from one of Europe’s most respected manufacturers. This machine is in very good condition and is fully equipped with sharp tooling, box & pan tooling, and extra bending rails, making it ideal for both standard and complex folding applications. The control screen has been upgraded to a larger display, improving visibility, usability, and operator comfort. Key Features & Benefits Schröder SPB 3200/3.0 CNC Folder 3200 mm working length 3.0 mm mild steel capacity Schröder POS2000 CNC control Upgraded large control screen Includes extensive tooling package Rear roller support table fitted Heavy-duty industrial build Excellent accuracy & repeatability Ideal for fabrication, HVAC, cladding & precision sheet metal work Included Tooling & Equipment Rear Roller Support Table Box & Pan Folding Tooling Sharp Sheet Metal Folding Tool Extra Bending Bars / Rails This tooling package allows for maximum flexibility, from straight folds to boxes, pans, trays, and complex profiles. Technical Specifications – Schröder SPB 3200/3.0Machine Type: Universal CNC Sheet Metal Folder Year: 2006 Control: Schröder POS2000 Condition: Very Good Capacity Usable working length: 3200 mm Maximum sheet thickness: 3.0 mm Beam & Adjustment Upper beam daylight: 300 mm Vertical adjustment of bending beam: 300 mm Drive & Power Upper beam drive: 4.4 kW Bending beam drive: 4.4 kW Nominal power: 9 kVA Pneumatics: 6 bar Machine Dimensions Machine length: 4568 mm Machine width: 2450 mm Machine height: 1737 mm Machine weight: 4380 kg Ideal Applications Sheet metal fabrication HVAC ducting & panels Architectural metal & cladding Enclosures, trays & cabinets General engineering & contract folding Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines inspected & honestly described Nationwide & export delivery available Gbsdpfxoyakn Ro An Rsl Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), You are bidding on: a branded machine - folding press, from a very reputable and well-known manufacturer - Schröder Machine features: Folding press Schröder AKV Rail bends cleanly – test possible Angle display Bending length just over 2m Sheet thickness: 2 mm (steel sheet); for aluminum, zinc, etc., up to approx. 3 mm Standard rail – optionally also available with segmented rail (see picture)! Optional back gauge Matching guillotine shear available, e.g., Schröder 2m/3mm (see last picture), or Schechtl HT, Ras, etc. Current new price is approx. €20,000 net without accessories Important! Optionally, you can find and purchase many machines and machine accessories such as various rails, back gauge – everything related to sheet metal and steel processing, including folding presses, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessories (beading tools, roll formers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available for any questions. You will receive an invoice according to § 25a UStG. Free loading is possible – weight approx. 1550 kg. Viewing and testing are possible and encouraged by telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise; we will be happy to advise you. Collection by the buyer (or a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: Folding Press Schröder AKV 260401 Gbodey Hbv Tjpfx An Rjl

Condition: good (used), functionality: fully functional, Year of construction: 2000, working width: 3,200 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, back gauge adjustment: CNC-controlled, power: 7.5 kW (10.20 HP), Equipment: documentation/manual, Very well-maintained and technically upgraded RAS 74.30 folding machine with a working length of 3200 mm. The machine has been specifically modernized and is immediately ready for production – ideal for metal construction and sheet metal processing. Technical data: Working length: 3200 mm Max. sheet thickness: 4.0 mm (steel) Year of manufacture: 2000 Power: 7.5 kW Gjdpfxey A Ewme An Rjbl Weight: approx. 5800 kg Equipment / Highlights: Motorized backgauge with swing fingers Travel path up to 2500 mm with stop extension Refurbished power supply Upgraded control system New SD card slot New flat screen (not yet visible in the photos) Reliable, robust industrial machine The machine runs smoothly and can be inspected under power.

Condition: excellent (used), Year of construction: 2007, Max. working width: 4040 mm For sheets with tensile strength of 40 kg up to: 3 mm Upper beam adjustment: 400 mm Lower beam adjustment approx.: 80 mm Max. electric bending angle setting up to approx.: 180° Upper beam adjustment drive: 4 kW Godpfx Aey Av E Ijn Rjbl Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm Electric connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm (height)