Used Gluing Machine for sale (64,836)

Condition: used, machine/vehicle number: 006290, Max working width: 1300 mm Max. machinable height: 100 mm Ppodou A Evhjpfx Aaheu No of Rollers: 2

Condition: used, Used machine Used veneer splicing machine of the company Kuper type FW 1150 passage width: 1150 mm feed speed: approx. 10 - 30 m/min Veneer thicknesses: 0.3 - 3 mm without tables in front and behind Ppedpewka Rkjfx Aaheu Availability: short term Location: Röllbach

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed Pjdpfx Aajwka S Ishspu - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Pjdpsw I Ur Nefx Aahjpu Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Psdpfxex Upgcs Aahjpu

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Supply current: 47.5 A Air supply: 6 bar Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed. Pedpfxozfi Hbs Aahspu

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 740703/01, passage width: 2,800 mm, input voltage: 400 V, type of input current: three-phase, The machine is fully operational and can be inspected during production while powered on. Also included in the sale is a Fisher + Rückle veneer parallel milling/gluing unit, capable of: edge milling with diamond tools automatic glue application preparation of veneer edges before splicing The complete line has been used in professional production and has been continuously maintained. Main advantages: Heavy-duty industrial Fisher + Rückle quality Very stable and precise operation Machine in good working condition Can be demonstrated during operation Parallel milling and glue application unit included Diamond tooling included Suitable for professional veneer production Psdpezdiinjfx Aahspu The machine is located in Denmark and can be inspected by appointment.

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Ppodpfx Asxgqmxoahsu Storage location: Nattheim

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Brand: ORMA/Osama Pedpfx Asd Iz Dfoahepu Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Condition: new, Gluing machine brand SELESTAMPA mod. IN120, working light 120 cm, max production speed 35 m/min, from 80 gr to 400 gr, electronic inverter for speed regulation, the glue used for operation is a normal cold vinyl glue. NEWLY BUILT MACHINE. Ppedpfx Asvt Nw Hjahsu

Condition: good (used), Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Ppodpfsyv Inzex Aahju Compressed air 6 bar Overall dimensions mm 1800 x 1900 x 2100 h Weight kg 500

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Ppedpeymfxqefx Aahsu Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: used, Year of construction: 2004, machine/vehicle number: 10720, working width: 1,300 mm, power: 3.2 kW (4.35 HP), table length: 400 mm, table width: 1,300 mm, number of rollers: 2, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working width max.: 1,300 mm Ppsdpfey Uv Adox Aahsu Number of rollers: 2 Table width: 1,400 mm Table length: 400 mm MACHINE DETAILS Total power: 3.2 kW EQUIPMENT CE marking The machine will be sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8533

Condition: excellent (used), Kuper FWM 630 in excellent condition Psdjy Swpmjpfx Aahspu

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Ppedpoy Sfb Rjfx Aahou Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Power supply: 380 V Weight: 250 kg Made in Italy.

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. Ppedpfxsy Rdzas Aahsu The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 20131018, working width: 1,640 mm, compressed air connection: 6 bar, total width: 2,600 mm, total length: 12,500 mm, total height: 2,250 mm, overall weight: 7,100 kg, Fasson gluing machine with a working width from 150 mm up to a maximum of 1,640 mm. It can process corrugated or honeycomb board up to 20 mm thickness and cardboard from 350 g/m². Plate thickness: 8 mm, material: sponge/rubber foam. Power requirement: approx. 15 kW. Psdpfxjy R Emks Aahopu

Condition: good (used), Year of construction: 1986, machine/vehicle number: 2967, Tränklein gluing machine ZW-D 500, with cardboard device, machine number 2967, built in 1986, machine is in good condition, available immediately Pjdovviriopfx Aahopu If you are interested, we would be happy to inform you about other machines in our company. You are welcome to view the machine in our company by prior appointment.

Condition: good (used), Schmedt Präcoll edge-gluing machine, in good condition, immediately available. Psdpfxjh H Iu Nj Aahspu If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our premises, subject to prior appointment.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams. Ppsdpov Ipl Tofx Aaheu

Condition: used, Dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf This device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 2535 Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Psdoyq S Iyspfx Aahjpu On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Kantenanleimmaschine / Edge Gluing machine Essor Ppjdpfoymaztjx Aaheu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, ENDPAPER GLUING MACHINE MAGRAF FO-32 Psdpfxsfhgzaj Aahspu -minimum format of book block; 110x148mm -maximum format of book block; 225x320mm -maximum thickness of book block; 50mm -power supply; 220 V -input power; 0,1 kw -weight; 75kg -dimension; 60c110c132cm

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: Ppodpfeyi Emysx Aahju - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Condition: used, Zweiwalzen Anleimmaschine für Kaltleim als Tischgerät, dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf Two roller Gluing machine for Cold glue as table-top machine, this device will carry adhesive on the back of a material to be glued Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 20185 Pjdpfsxln R Sex Aahjpu Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test