Used Buckle Folder for sale (729)

Year of construction: 1991, condition: used, Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Equipment • continuous stream suction feeder Gelhcdsc Idn Uowvjbl • counter IZVA 341 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft delivery: • belt delivery

Condition: good (used), Size max 460 x 650 mm min 105 x 150 mm Speed max 160 m/min Power requirements 2,3 kW (220/380V, 50Hz) Length 2.610 mm Width 1.100 mm Gjlhed Tndcjcdwvebl Equipment feeder: flat pile feeder counter 1st folding unit: 4 buckle plates noise prevention 2nd folding unit: knife-folding unit delivery belt delivery

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 Gbsled Iq S Rohcdwvjl • upright stack delivery with pressing SBP 66

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder 1st folding unit: • 4 buckle plates • Festa foldingrolleradjustment • noise prevention Gbolhcdjc Rhvtswvel

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates Gslhcdofbff Uowvobl rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Condition: good (used), Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder • counter PCS 100 1st folding unit • 4 buckle plates • Festa foldingrolleradjustment • pu steel folding rollers • noise prevention Gbjlhjhf Aw Ujcdwvol 2nd folding unit • attachable knife-folding unit • mobile knife-folding unit KB 36 peripheral units and deliveries • attachable belt delivery

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates Gjlhcedymm Hedwvobl • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder Gbeljd Iq S Uohcdwvjl • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter 1st folding unit: Gbslhcdjdm U Dhewvol • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: good (used), Size: 1.300 x 1.650 mm Golodyk Rlehcdwvobl Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: Gbslhcdjd A Hcvjwvsl • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder Golhoddh Evocdwvebl • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: used, Taschen-Falzmaschine 16 Seiten Seitenfalz - Buckle Folder for 16 pages cross Fold Heidelberg Stahlfolder TH82-6-6-VFZ Gelsxnc R Sjhcdwvebl

Condition: used, Taschen-Falzmaschine 16 Seiten Seitenfalz - Buckle Folder for 16 pages cross Fold Heidelberg Stahlfolder TH82-6-6-VFZ Taschen-Falzmaschine - Buckle Folder Heidelberg Stahlfolder TH82-6-6-VFZ 16 Seiten Seitenfalz - 16 pages cross Fold Walzen 2020 erneuert / Rollers 2020 renewed Year 2013 - Serial-No. 0-01500 Rundstapelanleger / Round Pile Feeder RFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 6 buckles - 6 buckles - 1 VFZ 52.D Knife Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SPH-70 Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Gbelhcjxnc S Ajdwvel Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Format: 310 x 432mm Equipment: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: Gbslhcex N I Uhedwvsl max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m Gslhotq E U Sscdwvebl 12KW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, operating hours: 4,624 h, control type: CNC control, sheet thickness steel (max.): 2 mm, year of last overhaul: 2012, In 2012, Salvagnini carried out a complete overhaul! TECHNICAL DETAILS Maximum feed-in length: 1,850 mm Maximum feed-in width: 1,500 mm Minimum length: 285 mm Minimum width: 190 mm Maximum diagonal: 2,150 mm Maximum discharge width: 1,500 mm Maximum reference dimension: 2,000 mm Minimum sheet thickness: 0.50 mm Maximum sheet thickness, mild steel (max. 410 N/mm²): 2.00 mm Maximum sheet thickness, stainless steel (max. 600 N/mm²): 1.25 mm Processing of pre-painted material: 3.00 mm Maximum tool length for CLA option: 1,000 mm Gbslhcjy Ey Ixedwvjl MACHINE DETAILS Control type: CNC control Operating hours: 4,625 h EQUIPMENT LS Upper bending blade LI Lower bending blade Manual sheet holder length adjustment CLA Long tab bending unit HP12015 R81 Cooling unit

Condition: used, functionality: fully functional, Year of construction: 1996, Used 3 meter CNC folding machine from RAS Gjlhcsy R N Tbsdwvsbl Model: 61.31 Capacity: 3150 x 1.5 mm CNC backgauge 4000 CNC control

Condition: ready for operation (used), Year of construction: 2019, We have here a Pitney Bowes F700 also known as Relay 7000 envelope inserting system available. This machine is year 2019 and only has done 1.763.359 envelopes. Works without any problem after we have tested it fully. Configuration: 2 main feeders - high capacity feeders 4 docoument feeders - with the extra feeder trays you can switch between documents and folded inserts Folding station Gbjlhcey R A D Tjdwvel Envelope inserting module and station.

Condition: used, functionality: fully functional, Year of construction: 1988, Hydraulic Swing Bending Machine Make: RAS Model: 74.30, 3200 x 4mm Year: 1988 Technical Data Brand: RAS Year of manufacture: 1988 Model: 74.30 Working length: 3200 mm Capacity: 4 mm Stroke: 400 mm Motor power: 7.5 kW Dimensions: approx. L 4.5 x W 2.0 x H 2.50 m Weight: approx. 5.8 t Equipment • CNC-controlled backgauge 1500 mm • Multibend 8000 control system • Motorized adjustment of the bending beam • Foot switch • Tools: - 3 sharp rails - 2 bending rails, 15mm and 30mm All data provided without guarantee. Gbelhcdwey Nx Ixjvjl A demonstration is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, FOLDER STAHL TI 40/43 COMBI Year 2005/2002 Gsloy R Sv Sohcdwvobl Condition: as new

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, Counterweight in large protective housing Gjlhcdwey Rxn Iovebl

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Gbelhcowmk Ewsdwvjl Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: new, Year of construction: 2026, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS Gelhcdewd Emkswvsbl EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: good (used), functionality: fully functional, Year of construction: 1995, Folding machine with up to 2500 mm working length, maximum material thickness up to 1.5 mm. Gbslhcdwsy Rhtysvsl