Used Napkin Folder for sale (699)

Condition: good (used), Strati Anden 660A Folder Gluer The machine is in very good condition, recently inspected, regularly serviced, and maintained. This single-point machine includes a right and left gluer. Year of manufacture: 2015 Width: 660mm Maximum speed: 180m/min Maximum paper weight: 600gsm Power: 4.5kW Itsdpfxszz Hgwe Am Hel Power supply: 230V External dimensions: 750x105cm Weight: 1800kg Includes a set of documents and a pallet of small parts.

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Itsdpfx Ametq E U So Hol Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Iodpfozy Ndcox Am Hjtl Hydraulic and electrical circuit diagrams

Year of construction: 2021, condition: as good as new (ex-display), creasing- folding machine dmsDIGITAL 375+375KF Large stacking unit 500 mm Alignment section, creasing module, transfer section Folding unit with two swords Itodpjnfvvmsfx Am Hsl double sheet diverter for non-stop operation up to 8,200 sheets/h fast

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, SUMMER DISCOUNT DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment SUMMER DISCOUNT Itedjgmhxaepfx Am Hjl

Condition: excellent (used), Year of construction: 2019, Working length: 6400 mm Depth of recess: 1250 mm Bending capacity: 2.0 mm Width of segmented bending blade: 10 + 10 mm Ijdpfxoz A Sxxe Am Hetl Maximum bending angle: 143° Bending accuracy: ± 0.5°

Condition: good (used), functionality: fully functional, Year of construction: 1994, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of Manufacture: December 1993 / January 1994 Technical Data Manufacturer: Fasti Type: 212-20-6 Year of Manufacture: December 1993 / January 1994 Useful length: 2040 mm Sheet thickness: 6 mm Stroke: 500 mm Connected power: 12.42 kW Voltage: 400 V Iedpfez Aqx Tsx Am Hstl Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a push button and digital display - Controlled rear stop, 1000 mm with ball bearings, extendable to 1500 mm - 2 x sharp edge rails, 45° - 1 x sharp edge rail, 30° - Bending rails 16, 35, 10, 12, 15 mm - Gooseneck rail H 130 mm, segmented All information is without guarantee. The machine is characterized above all by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Technical data Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. Ijdjz Ah Apopfx Am Hotl A demonstration can be arranged at our showroom at any time.

Condition: like new (used), Year of construction: 2021, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Iodpfxozzxb He Am Hetl Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: used, Taschen-Falzmaschine 16 Seiten Seitenfalz - Buckle Folder for 16 pages cross Fold Heidelberg Stahlfolder TH82-6-6-VFZ Ijdpfszzw I Sjx Am Hstl Taschen-Falzmaschine - Buckle Folder Heidelberg Stahlfolder TH82-6-6-VFZ 16 Seiten Seitenfalz - 16 pages cross Fold Walzen 2020 erneuert / Rollers 2020 renewed Year 2013 - Serial-No. FH.FAW0-01500 Rundstapelanleger / Round Pile Feeder RFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 6 buckles - 6 buckles - 1 VFZ 52.D Knife Speed 50.000 Cycles/hour Digitaler Bildschirm / Digital Display Auslage / Delivery Heidelberg SPH-70 Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used swivel bending machine by Schroder Model: SPB Evo 3200 4.0 UD Capacity: 3200 x 4 mm Upward and downward bending Year of manufacture: 2013 POS 3000 CNC control (graphical) Hydraulic upper clamping Itsdpeyhdz Tofx Am Hol CNC backgauge with 4 finger types (standard, clamping, side clamping) Additional lower blade

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used 2-meter swivel bending machine from Schroder Itsdpfezgtmzex Am Hel Type: MAKV Capacity: 2050 x 2.0 mm POS 200 control system Year of manufacture: 2007

Condition: ready for operation (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, Equipment: compressor, documentation/manual, The Morgana Major folder is a compact, high-performance folder with two fold plates. It is designed for short-run digital and commercial print shops. Built for reliable, easy-to-use folding of brochures, leaflets and booklets, it offers quick job changes and consistent fold quality for mixed media. Its simple setup and robust air feeding system make it a best choice for finishing departments seeking speed and repeatable results. Maximum sheet size: 648mm x 365mm Minimum sheet size 148mm x 140mm Maximum paper weight 240 gsm Minimum paper weight 56 gsm Itodsz Agvbepfx Am Hsl Load capacity 500 sheets 80 gsm Speed up to 27.000 A4 sheets per hour

Condition: good (used), Swivel bending machine, a press brake from the renowned manufacturer Schröder. Capacity: 3mm steel, aluminum, etc., and more. Working width: approximately 2.04m. Weight: approximately 2.4 tons. Easy to operate. Manual and foot controls. Itjdpez Ad Rvjfx Am Hsl Optionally, a segmented upper beam or a back gauge is available. The machine comes from private use. Loading with a forklift is no problem. On-site testing is, of course, possible. You will receive an invoice according to §25a UStG – the VAT is included in the invoice amount. Subject to differential taxation. Optionally, a matching plate shear, 2m, 3mm, is available – a set price is also possible. Other equipment and tools for sheet metal processing are available.

Condition: used, Year of construction: 2001, 3 MONTHS WARRANTY offer consist of: - cross folder Horizon AFC-504 AKT - flat pile feeder Isdou Sr Ehspfx Am Hstl - delivery connector Horizon AFC-504 AKT 4-buckles cross folder - roller condition: 0% - technology: touch & work - error avoidance: misfeed-,doublefeed- and jamming control - memory folding types: 11 standard-types of folding preprogrammed - saveable jobs: 50 memories for repeat orders - knife: full automatic - numbers of buckles: 1. folding unit: 4 buckles + knife 2. folding unit: 2 buckles - sheet size: max. 490x650mm; min. 120x172mm - paper weight: 40-250g/sqm - pile height: 650mm - speed: max. 27.000 cycles/h - power: 400V / 50Hz - 2,5kW - dimensions: 2.540x1.790x1.440mm - weight: 870kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Hydraulic folding machine by Schröder Group, model SCHRODER-FASTI 215-40-4 A proven, robust industrial machine for precise bending, folding, and profiling of sheet metal. Despite its age, the machine operates flawlessly, delivering precise and clean results. Technical Data Machine type: Folding machine / hydraulic shear & folding machine Manufacturer: SCHRODER-FASTI Model: 215-40-4 Control: FASTI-matik 4000 (CNC) Max. sheet thickness: 4 mm (at 400 N/mm²) Working length / reference dimension: approx. 2,000 mm Stroke of upper beam: 350 mm Motorized adjustment of bending beam: 80 mm Motorized adjustment of lower beam: 80 mm Motor power for adjustments: 0.75 kW Features - Motorized adjustment of bending and clamping beams - High clamping pressure speed - Robust, adjustable bending options - FASTI-matik 4000 CNC control - Segmented/finger rails Tools / rails: Flat rail: 18 mm Medium rail: 45° Reinforcing rail: 36 mm Finger size: 150 mm - High repeat accuracy - Fast setup times - Proven FASTI quality "Made in Germany" Condition: Used Technically tested, fully functional, and ready for immediate use Itjdpfxoygv S Uo Am Hjl Delivery time: immediate Shipping terms: ex works, loaded free of charge Loading: possible by forklift or crane Transport / forwarding: can be arranged

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Itodpfx Aozzff Ssm Hol Features of the device: Press brake Schechtl MA 200 / 6 The bending beam bends cleanly – testing is possible. Angle adjustment for up to 6 bending steps (if only 2-3 or, for example, 4 are needed, simply set it to the desired number). Ideal for series bending. The machine was used by a carpenter. Bending length slightly over 2m. Sheet thickness: 2 mm iron – sheet – aluminum, zinc, etc., up to approx. 3 mm. Standard bending beam – radius for aluminum, zinc would also be available as an option, as would an extension and special bending beam! Foot pedal for operation. Optional depth stop. Sheet metal shear HT 200, or MT (see picture) – or sheet metal shear Schröder electric 2m – 2.5mm would be optional, but not included in the price – the offer can be adjusted. Important! You can optionally find and purchase many machines and machine accessories, such as various bending beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, circular machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice according to § 25 a UStG; the VAT is included in the invoice amount. Differential taxation. Free loading is possible – weight approx. 1700 kg. Inspection and testing are possible and desirable after arranging an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Press brake MA 200 / 6

Condition: excellent (used), Year of construction: 2011, operating hours: 1,200 h, functionality: fully functional, overall weight: 1,800 kg, machine base height: 1,400 mm, Equipment: documentation/manual, Very good condition and low hours. KAMA Profold is a flexible folder gluer for folding cartons with straight-line or crash-lock bottom. ProFold 74 folds and glues blanks into a multi­tude of print products auto­mat­ic­ally and cost-effi­ciently! Whether present­a­tion folders, folded cards, ship­ping envel­opes, ticket pockets, cross folders and advent calen­dars or orders from the field of pack­aging, such as folding cartons with straight-line or crash-lock bottom. Produce all these products in-house on the ProFold 74, benefit from shorter delivery times and extend your margins! Iodszzdcvepfx Am Hotl OPTIONS INCLUDED: -Device for crash lock bottom(automatic) boxes, K70513 -Addition Crash lock kit: 2 devices, 3 x rolls, 2 x 6 rolls, 6 clamps K70514 -Baumer HHS: 1 nozzle incl. hose, plus mounting bars K70601 - Spending/placing device - 4pcs. 1 unit down hold devices -1pc. Small folding knife left -1pc. Cross beam Addition Crash lock kit: 2 devices Technical specs: Max sheet size 740x740mm Min: 100x120mm Max speed: 150m/min Paper and cardboard 100-600g/m2

Year of construction: 2025, condition: new, Packaging machine to pack regular shaped objects like stacks of soft fabric oder paper tissues, controlled through touch screen operation and PLC. Including infeed conveyor, no product no bag function, easy change of packaging size. SIEMENS PLC, WEINVIEW Touch Screen, OMRON Relay and Coder, SCHNEIDER AC contactor, PANASONIC servo driver and motor, DANFOSS frequency converter. - Specifications: Bag sizes: L(100-230)xW(100-200)xH(40-100)mm; max. speed of the machine in neutral: 40 cycles/minute; power: 380V, 3.6kW; machine dimensions: L3560xW5885xH1925mm; weight: 3300kg. Isdpfx Ajv Nmbbjm Hjtl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Manufacturer: Jorns Model: NL125-SM-OP-6 Itodszmy Eqjpfx Am Hsl Year of manufacture: 1992 Condition: used Machine type: Swiveling bending machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, total width: 3,000 mm, total length: 17,600 mm, input voltage: 380 V, overall weight: 13,000 kg, GRASSI 145 folder gluer, designed for the production of folding cartons and micro-flute packaging. The machine is currently in production, regularly maintained, and in very good technical condition. It is suitable for manufacturing a wide range of carton styles, including straight-line cartons, crash-lock bottom cartons, 3-, 4-, and 6-corner boxes, as well as custom angled-glued constructions. Technical Specifications: * Manufacturer: GRASSI * Model: 145 * Year of manufacture: 1997 * Working width: 1450 mm * Minimum blank size: 310 × 80 mm * Maximum production speed: up to 145 m/min * Solid board processing capability: up to 700 g/m² * Materials: folding carton and micro-flute board * Box styles: * Straight Line * Crash Lock Bottom * 3-Corner * 4-Corner * 6-Corner * Custom angled-glued carton constructions * Closing section: 2- and 4-crease * Belt width: 38 mm * Power supply: 3~380 V / 50 Hz * Total installed power: 80 kW * Compressed air requirement: 6–8 bar * Machine dimensions: 17.6 × 3.0 m * Machine weight: 13 tons Equipment: * Three independent operator control panels located in different machine sections * Main operator panel with display * Delivery section camera with live monitoring * Remote control operation * Servo-driven machine sections * Vacuum belt feeder * Air blowers for transport belts * Delivery alignment system Iedpfx Ajztbxxjm Hjtl * Quick and easy adjustment of closing hooks * Additional production tooling included Optional Gluing Systems: The machine is supplied without a gluing system as standard. For an additional charge, the customer may choose one of the following three professional gluing systems: * KAS * Robatech * HHS All gluing systems are fully operational, currently used in production, and can be demonstrated and tested during the machine inspection. Technical Condition and Production Trials The machine is in continuous production and can be inspected under power. It operates reliably, providing consistent, high-quality folding and gluing performance. The buyer has the opportunity to: * perform production trials using their own carton blanks, * test the selected gluing system, * inspect the machine during live production, * review the technical documentation during the inspection.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, BOBST DOMINO 100M folder-gluer manufactured in 1977, designed for the production of folding cartons and micro-flute packaging. The machine is currently in production, regularly maintained, and in very good technical condition. It is suitable for straight-line cartons and crash-lock bottom boxes. Technical specifications: • Manufacturer: BOBST • Model: DOMINO 100 M • Year of manufacture: 1977 • Working width: 1000 mm • Maximum production speed: up to 400 m/min Itjdezr Rm Njpfx Am Hjl • Solid board processing capability: up to 700 g/m² • Materials: folding carton and micro-flute board • Box styles: Straight Line and Crash Lock Bottom • Power supply: 3~380V / 50 Hz • Maximum connected load: 25 kVA • Total installed power: 11 kW • Machine dimensions: 14 × 1.9 × 1.7 m • Machine weight: 8.5 tons Equipment: • 2 independent operator panels with displays • Additional monitor at the delivery section with a camera view of the machine exit. • Additional production tooling included • Complete technical documentation • Electrical documentation • Operator documentation Optional gluing systems: The machine is offered without a gluing system. The buyer may choose one of three professional gluing systems: • KAS – EUR 9,800 net • Robatech – EUR 11,900 net • HHS – EUR 15,900 net All systems are operational, currently used in production, and can be demonstrated and tested during machine inspection. Technical condition and tests: The machine is in continuous production and can be inspected while powered on. It operates stably and provides high-quality folding and gluing. In the presented video material, the machine is shown folding and gluing cone-shaped packages. For straight-line carton production, the machine regularly achieves an output of approximately 20,000–25,000 boxes per hour. Actual production output depends on the box design, blank dimensions, material type, and selected operating speed. • Production trials with customer-supplied blanks are available • Tests with the selected gluing system are available • Individual live machine demonstration can be arranged • Technical documentation can be reviewed during inspection

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 1,500 mm, total length: 12,000 mm, total height: 1,600 mm, input voltage: 380 V, overall weight: 5,000 kg, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: HOSON Model: ZH-1000BFTHS Year of manufacture: 2018 Working width: 1000 mm Maximum production speed: up to 300 m/min Board range: 200–600 g/m² Materials: Folding carton and micro-flute board Box styles: Straight Line and Crash Lock Bottom Folder: Yes Power supply: 3~380V / 50 Hz Total installed power: 14 kW Machine dimensions: 12 × 1.6 × 1.5 m Machine weight: 5 tons Equipment: 3 independent operator displays; Production process monitoring system; Additional production tooling included; Complete technical documentation; Electrical documentation; Operator documentation Optional gluing systems: KAS, Robatech, HHS available at additional cost; All systems operational, can be demonstrated and tested during machine inspection Technical condition: In continuous production, regularly maintained, and in very good technical condition Itodpfx Aozta Urjm Hel Production/testing options: Production trials with customer-supplied blanks available; Tests with the selected gluing system available; Individual live machine demonstration can be arranged; Technical documentation can be reviewed during inspection Demonstration performance: Demonstration video shows ~25,000 boxes per hour using GD300 board; Actual output depends on box design, blank size, material type and machine speed.

Condition: good (used), Thalmann Pico 1mm steel - 1.75mm aluminum The machine was recently inspected and adjusted by a professional. It is in perfect working order and ready for immediate use. It bends all angles precisely up to a length of 6 meters. The shears are sharp and cut electrically. Itedpfx Amezyzz To Hsl The control is simple and includes a foot pedal. Testing under power is possible – a forklift is available on site. The machine is privately owned and is being offered here as a friendly service (facilitated sale). Private sale – near Heilbronn.

Condition: used, Year of construction: 1988, Aida 76 folder-gluer Iodpezyu Uaefx Am Hotl 3/4 points Hot melt Very good working condition