Used Firewood Cleaning Drum for sale (9,486)

Condition: new, Year of construction: 2024, Cleaning method The Roba Profi Clean machine line guarantees as a through feed solution high productivity. As a stand-alone solution for large quantities or directly behind the turnover/backside trimming equipment of a thermos foiling line. The only solution that is able to feed a complete batch of doors coming out of a membrane press. During this operation the laminated fronts get cleaned from glue residues and simultaneously all four edges are slightly rounded without the risk of delamination. Therefore the parts do not require any further processing steps and can be forwarded directly to the packaging. This is ensured by two or four clockwise and counterclockwise working cleaning drums, which are equipped with special cotton brushes. Further on this machine is also able to show its high capability in the cleaning of all other laminated furniture parts. Roba Profi Clean Operation areas • Backside cleaning of thermo-foiled doors • Cleaning of laminated furniture panels Iiedpfjff Htpex Apcog The Roba Profi Clean as through feed solution guarantees high productivity with best cleaning results. Advantages of the Roba Profi Clean principle: • Optimized cleaning from dust and glue residues • Optimal rounding of sharp edges Roba Profi Clean equipped with two double brush cleaning Aggregates Double brush aggregate work clock- and counter- clockwise, equipped with special cotton brushes for secure cleaning. The Roba Profi Clean is suitable for cleaning of all kind of laminated furniture parts

Condition: refurbished (used), Year of construction: 2004, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 014404, total width: 2,600 mm, total length: 1,750 mm, total height: 2,350 mm, maximum load weight: 50 kg, tank capacity: 230 l, compressed air connection: 6.5 bar, input voltage: 380 V, year of last overhaul: 2026, Hösel Solvacs-2 with additional distillation unit. The system and the distillation unit have both undergone a professional general overhaul. The system is connected to the power supply and is ready for inspection and a test run. The system requires external cooling. Iiedjzln Iqspfx Apcsg

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard Iodpfx Apezzrmpsceig UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, axle configuration: 3 axles, first registration: 03/1992, color: other, Year of construction: 1992, Empty weight: 4.600 kg Axle 1: left 6 mm right 7 mm Axle 2: left 7 mm right 6 mm Axle 3: left 6 mm right 6 mm Iiedpozt R Rdsfx Apceg We have the possibility to stack trailers!

Condition: good (used), Baader 601 Separator Вaader 601 provides soft separation of raw meat material from a waste components – bones, skin etc. A flexible squeezing belt transports the product to a perforated drum. It gently squeezes the softer particles like meat and fat through the holes, then the harder particles such as bones, sinews and cartilage stays outside of the drum. Capacity: up to 800 kg per hour The throughput can vary in dependence of the drum hole size, product and its pre-treatment, the selected pressure etc. Baader 601 is а user-friendly machine. Its cleaning is easy and quick. The machine is built in accordance to worldwide recognised sanitary standards. A pressure system ensuring gentle product processing and reduced machine wear. Machine has castors for easy handling. Manufacturer: Baader Model: 601 Capacity: Up to 800 kg./hour Drum: 3 mm and 5 mm Iiedpfx Aezgtanopcjg Power: 400V / 50Hz / 3kW Machine dimensions (LxWxH): 950x950x1.800 mm Machine weight: 500 kg.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. Iijdpfjv S Dk Sjx Apceg The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door Iijdpfxsz Aha Ij Apceg • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Condition: excellent (used), mileage: 128,632 km, power: 165 kW (224.34 HP), first registration: 06/1988, fuel type: diesel, tire size: 13R22,5, axle configuration: 4x4, fuel: diesel, color: orange, gearing type: mechanical, number of gears: 6, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 5,050 mm, loading space width: 2,500 mm, Year of construction: 1985, Equipment: crane, differential lock, seat heater, = Additional Options and Accessories = - All-wheel drive - Heated mirrors - Co-driver's seat - Leaf-sprung suspension - Comfort seats for driver - Differential lock - Differential lock - Speed limiter - Hydraulic system - Hub reduction - Radio/CD player - Sun visor - Tool box - Power Take-Off (PTO) - Power Take-Off (PTO) Iedjyrhgbepfx Apcoig = Notes = PERFECT CONDITION MERCEDES-BENZ 1622AK (V6) 4x4 FULL STEEL SUSPENSION CHASSIS WITH HMF 1003K2 CRANE, MANUAL GEARBOX & REDUCTION AXLE!! 220HP, V6 ENGINE!! ZF6 GEARS MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLE!! P.T.O.!! SUNVISOR!! 3RD SEAT!! ETC.!! HMF 1003K2 CRANE AT THE REAR OF THE CHASSIS (2 HYDRAULIC SLIDING SECTIONS)!! 4 STORAGE BOXES!! RECK FOR OVERSIZED LENGTH ABOVE CABIN!! TRUCK IS IN CLEAN & GOOD WORKING AND DRIVING CONDITION, READY FOR (ELECTRICAL) WORK!! MORE MERCEDES-BENZ 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE: SHIPMENT, STACKING, TRANSPORT, OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE-STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (/) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Transmission Transmission: ZF 6 GEARS MANUAL GEARBOX, 6 gears, manual transmission Axle Configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front Axle: Tire size: 13R22.5; Differential lock; Max. axle load: 7500 kg; Steered; Tire tread depth left: 90%; Tire tread depth right: 90%; Reduction: single reduction Rear Axle: Tire size: 445/65R22.5; Differential lock; Max. axle load: 11500 kg; Tire tread depth left: 90%; Tire tread depth right: 90%; Reduction: external planetary axles Weights Unladen weight: 10,700 kg Payload: 8,300 kg GVW: 19,000 kg Functional Mast: Sliding boom Lifting capacity: 10,000 kg Crane brand: HMF 1003K2 CRANE Condition Technical condition: very good Optical condition: very good Further information Please contact the Sales Department or Erik Engel for more information.

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Iedpfx Apey D Nktocsig Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: good (used), Sievmaster Flavouring drum Iiedpszzf Duefx Apcog Stainless, flavouring drum with sievmaster vibratory sieve, overall length 2000mm, mobile, 3Ph

Condition: used, Year of construction: 2002, operating hours: 3,680 h, Internal vehicle number: G400103 Available immediately at our site in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HAMM tandem roller with vibration and oscillation, TYPE DV 08V Super complete in standard configuration with CE marking and declaration of conformity, including: - ROPS-integrated driver's cab - Cab heater - Sound insulation - Edge compaction & cutting system - Cutting wheel - Pressing roller, 45°, 5 cm surface - Track indicator for KAG (bulk goods handling) - Hydraulic connection - Asphalt temperature indicator - TÜV (Technical Inspection Association) approval - On-board tools and documentation - Seat belt Iedjy Ekncjpfx Apceig Special paint: RAL 8017 / 1001 - Fuel tank, 155 liters Total compaction force: 288 / 323 kN Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 719,045 km, power: 228 kW (309.99 HP), first registration: 05/2000, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 5,280 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel, total length: 7,700 mm, total width: 2,550 mm, Year of construction: 2000, Equipment: ABS, differential lock, fridge, spoiler, = Additional Options and Accessories = - Roof spoiler - Power Take-Off (PTO) - Sun visor - Spotlights = Notes = Scania T94.310 6x4 16-speed manual gearbox. Alcoa wheels. New tires. Clean chassis! = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 1: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 95%; Tire tread depth left outer: 95%; Tire tread depth right inner: 95%; Tire tread depth right outer: 95% Rear axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 95%; Tire tread depth left outer: 95%; Tire tread depth right inner: 95%; Tire tread depth right outer: 95% Weights Unladen weight: 9,365 kg Iedpfx Aew H Ilnopcjig Payload: 16,635 kg GVWR: 26,000 kg Identification Model number: T94.310 / CAB/TORPEDO / 6X4 = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output Iiodjxu I T Ejpfx Apcsg - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3292010, total width: 1,070 mm, total length: 2,030 mm, total height: 2,320 mm, input voltage: 400 V, ULTRON U-100 ultrasonic cleaner – 30 kW – 400 V – 2011 For sale: ULTRON U-100 industrial ultrasonic cleaner, manufactured in 2011, designed for thorough cleaning and degreasing of industrial components using ultrasonic technology. The machine has an ultrasonic power of 30,000 W and operates on a 400 V power supply. The unit is constructed from stainless steel and features a spacious working chamber with a lid. Additional equipment/modification: The cleaner has been fitted with a custom-made lifting and lowering mechanism for the basket, operated by an actuator, which greatly simplifies the loading and unloading of cleaned components and the operation of the device. Iedpfx Apjzza Inscoig Technical data: - Manufacturer: ULTRON - Model: U-100 - Year of manufacture: 2011 - Machine number: 3292010 - Ultrasonic power: 30,000 W - Power supply voltage: 400 V - Overall dimensions: 2030 × 1070 × 2320 mm - Basket lifting/lowering: by means of an actuator – custom-made - Construction: stainless steel The machine has a robust, industrial design and is suitable for use in production plants, workshops, and for cleaning industrial parts and components. Transportation is the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2022, Extraction connection, D 140mm Chip collector capacity 200L Iiodpfozxql Ejx Apceg Airflow rate [m³/h] 2500 3 kW, 400V

Condition: new, Year of construction: 2026, Motor power 9.5 kW Splitting force 20 tons Voltage 400 V / 50 Hz Working pressure 16 - 20 MPa Cylinder Ø101.6 x 610 mm Maximum log diameter 480 mm Maximum log length 610 mm Cycle time 6 - 8 s Return time 3 s Splitting wedge 6-arm Isdpfsyx D E Iox Apcjig Oregon guide bar 22" Chain 74 links, 0.375 Saw/splitter drive hydraulic motor/gear pump Ejector length 3.2 m Conveyor belt (outfeed belt) 6800 x 250 x 4 mm Tires 13" Shipping dimensions (W x L x H) 2250 x 1000 x 1200 mm Weight 820 kg Features: 20-ton splitting force – effective splitting of larger logs. Electric drive – economical, quiet, and clean operation without exhaust fumes. Hydraulic feed and pressure – stable log guidance and improved operator safety. Ejector angle adjustment – ​​modify the direction of split biomass removal. Hydraulic guide and lift adjustment – ​​conveniently adjust the position of the working material. Cutting and splitting function – one tool for two key woodworking operations. Sturdy construction – a durable and stable frame for intensive use. Ergonomy and work comfort – intuitive operation and convenient settings increase productivity. Versatile use – suitable for farms, workshops, and firewood processing. Wedge, 8-piece knife - price €130 (paid additionally). Wedge, 4-piece knife - price €100 (paid additionally). Hydraulic log feeder for firewood processors - price €1,150 (paid additionally).

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Ultrasonic cleaning and passivation are possible (citric acid-based), CNp vacuum process for, e.g., blind holes. Suitable for high-purity industries, the electronics industry, ranging from coarse/pre-cleaning tasks under robust industrial conditions to fine and ultra-fine cleaning processes. Batch size: 670 x 480 x 300 mm. Components made of metal, plastic, or ceramic. Suitable for bulk materials or positioned individual components. Fully or partially automated, e.g., diesel injection components. Iedszhv Udspfx Apcoig

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, heating capacity: 3 kW (4.08 HP), overall weight: 300 kg, input voltage: 380 V, year of last overhaul: 2026, Two-stage machine: the first stage uses ultrasonic cleaning, and the second stage is for rinsing without using the ultrasonic function. Isdszt Riajpfx Apceig

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, total height: 900 mm, total length: 900 mm, total width: 700 mm, overall weight: 180 kg, input voltage: 380 V, type of input current: three-phase, laser hours: 15 h, laser power: 3,000 W, laser type: fiber laser, laser source manufacturer: Max Photonics, Equipment: documentation/manual, Hongniu HN-2000H – 3000W Fiber Laser Cleaning Machine Industrial fiber laser machine for fast removal of rust, paint, coatings and surface contamination. This is an ex-display/demo machine and has been used for only approximately 15 hours. It is in excellent, very clean condition. Specifications: 3000W MAX Photonics laser source Industrial water chiller 10 m cleaning torch cable Dimensions: 900 × 700 × 900 mm Weight: 180 kg Iedpfxozy D Dko Apcoig Included: One-year supply of protective lenses Nitrogen cylinder 20 m extension cable An invoice will be provided. The machine is located in İzmir, Türkiye, and is available for inspection.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,909 h, functionality: fully functional, machine/vehicle number: 08241380, fuel: diesel, DynaJet 500 High-Pressure Cleaner We are offering for sale a professional DynaJet 500 high-pressure washer with a diesel engine and water heating system. Technical Specifications: • Type: DynaJet 500 • Model: DY Boiler • Fuel: diesel • Power supply: 12 V • Maximum operating pressure: 500 bar • Maximum system pressure: 600 bar • Maximum flow rate: 28 l/min • Maximum temperature at high flow rate: 80 °C at 28 l/min • Maximum temperature at low flow rate: 150 °C at 8 l/min Iiedpjzuaftefx Apcog • Power: 115 kW • Year of manufacture: 2009 Machine application: This professional high-pressure cleaner is particularly suitable for: • cleaning industrial equipment and machinery, • removing dirt, grease, and deposits, • cleaning construction and agricultural equipment, • cleaning production and operational areas, • demanding industrial and maintenance cleaning. Machine condition: • The machine is complete, • functional and operational, • diesel system with heating, • high-pressure design up to 500 bar, • the machine is equipped with a chassis for easy handling, • sold as a fully functional unit. The machine is suitable for companies seeking high-performance professional equipment for high-pressure cleaning in industry, construction, agriculture, or service operations.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: Fabr. / Serien Nr. Co2122, operating hours: 6,250 h, total length: 7,500 mm, total width: 2,500 mm, total height: 4,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, Manufacturer: Laborex Cleaning Technology Ijdszi E S Uepfx Apceig Mfg. / Serial No. Co2122 Cleaning system with 3 chambers, including pre-cleaning and post-cleaning. The system is completely insulated with stainless steel.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Iijdjxvxqdspfx Apcog Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Iodpfx Apex E Rd Docoig Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: new, functionality: fully functional, Year of construction: 2025, The ASCO® SD MINI screening drum features a foldable design and is a semi-mobile unit. Equipped with a vibration motor, it is particularly practical for recycling operations, as well as in the construction, agricultural, and gardening sectors where many different materials need to be processed. The innovative mobile trommel screen from ASCO®Screen. The variable height adjustment makes it easy to handle and transport. Screening a variety of materials is effortless, whether you load the machine manually or with the help of an excavator. In both cases, the screened material can be transported via the conveyor belt after the process. The screened material is distributed over and under the entire length of the drum, while oversized material is ejected at the rear of the machine. Efficient processing of various materials in recycling operations. Economical use in construction, agricultural, and gardening operations where space is limited. Flexible use thanks to numerous adjustment options. High performance and capacity for impressive screening performance. Versatile material separation of coarse particles, shavings, compost, soil, bark mulch, pellets, wood chips, gravel, building demolition materials, and plastic. Technical Specifications: Screen length: 1.49 m Usable screen length: 1.25 m Outer diameter of the screen drum: 0.8 m Usable screening area: 3.15 m² Screening capacity: 5 - 40 t/h Mesh size: Ø4 - Ø100 mm Hopper opening: 1600 x 760 mm Bucket width: 1.5 m Speed (adjustable): 5-20 rpm Ieder Nbxyopfx Apcoig Drive power: 400 V / 2.2 kW Filling height: 1.5 - 1.86 m Weight: 600 kg Highlights: - Vibration motors for emptying the hopper - Three different drum versions - Drum rotation in both directions - Cleaning brush - Easy drum replacement - Single-wheel drive - Hour meter - Adjustable height / supports with wheels and without wheels

Condition: excellent (used), axle configuration: 3 axles, first registration: 10/1999, suspension: air, tire condition: 50 %, color: other, Year of construction: 1999, Equipment: ABS, = Additional options and accessories = - air suspension - Drum brakes = More information = Tyre profile: 50% Iisdpfxez Dgh Rs Apceg Brakes: drum brakes Suspension: air suspension Tipper: Back Technical condition: very good Visual appearance: very good