Used Firewood Cleaning Drum for sale (9,526)

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Type: Topline 320 Designation: Cleaning machine Distillation module: VD160 Tank volume: 320 L Spin speed: 550 rpm Power: 9.1 kW Ndodow I Ddhepfx Af Ssb Year of manufacture: 2007

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. Ndodpeq H H Rusfx Af Seb In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 200 h, machine/vehicle number: 31015, control type: PLC-controlled, degree of automation: manual, actuation type: manual, controller manufacturer: 4JET, overall weight: 350 kg, total length: 1,310 mm, total width: 525 mm, total height: 1,454 mm, power: 200 kW (271.92 HP), laser hours: 200 h, compressed air connection: 5 bar, laser power: 200 W, laser wavelength: 1,064 nm, type of cooling: water, laser type: fiber laser, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, We offer a non-contact, mobile laser cleaning system, model 4JET M200, which was used solely for demonstration and testing purposes. We also offer a wide range of accessories, including: fiber extension cables (3m to 10m), 5 pieces; laser safety goggles; and a mobile laser protection curtain with frame. Ndodpozlrzzefx Af Seb

Condition: ready for operation (used), operating hours: 99 h, functionality: fully functional, machine/vehicle number: 620110, year of last overhaul: 2026, HEIDELBERG SM-74-2 | 2-Color Offset Printing Machine Year of manufacture: 1994 Total impressions: 99 million Machine No.: 620 110 Printing specifications: - Cpc 1-04, CP Tronic - Max. sheet size: 530 mm x 740 mm (20.87" x 29.13") - Min. sheet size: 210 mm x 280 mm (8.27" x 11.02") - Max. print format: 510 mm x 740 mm (20.08" x 29.13") - Material thickness: 0.03 mm - 0.60 mm (0.0012" - 0.0236") - Gripper margin: 8 mm - 10 mm (0.32" - 0.39") Print output: - Maximum: 15,000 sheets per hour (sph) Plate cylinder: - Cylinder undercut: 0.15 mm (0.0059") - Distance from lead edge of plate to lead edge of print: 59.50 mm (2.34") Plates: - Size (L x W): 605 mm x 745 mm (23.82" x 29.33") - Thickness: 0.25 mm - 0.30 mm (0.0098" - 0.0118") Feeder: - Electronic pull lay control - Integrated preloading device - Ultrasonic and electromechanical double-sheet detector - Speed-compensated air blast - Self-cleaning pneumatic pull lay Printing Unit: - AutoPlate quick plate change system - Alcolor dampening system - Automatic wash-up devices (inking unit, blanket, impression cylinder) - TransferJacket Blue Delivery: Ndedpfx Aoy Sxb Dsf Sob - Non-stop delivery with rake - Super Blue delivery drum - Powder spray device Machine is in production and can be seen in operation.

Year of construction: 2025, condition: new, functionality: fully functional, The DANIBRUM SIP series of brush sanders is a complete solution for the professional finishing of wood, MDF, milled or composite panels. Comprising the SIP610, SIP810, SIP813 and SIP1013 models, the range covers the varied requirements of processing workshops and medium and large industrial units SIP610 is an automatic brush sander, designed with state-of-the-art technology to perform finishing processes on flat and profiled surfaces with maximum precision. The equipment is ideal for rounding off sharp edges, cleaning the surface of fine dust, as well as preparing for painting or varnishing Whether used in a medium-sized workshop or in an industrial line, the SIP610 offers a constant output and a uniform quality of finish, with a minimum of manual interventions The high-quality brushes apply a controlled and adaptable pressure, which allows for the effective removal of imperfections without damaging the material Equipped with a PLC control system and a touch screen interface in Romanian, the SIP610 is easy to use, even for less experienced operators. Predefined programs allow rapid adaptation to different types of materials Thanks to SICK brand encoders and the electrical adjustment system of the working groups, extremely precise positioning can be achieved, with deviations of only 0.1 mm Nsdpswgw Tzefx Af Ssdb From solid wood to MDF or composite panels, the SIP610 can be successfully used for a variety of applications, offering consistent and superior results Individual electrical adjustment for each sanding group, which allows fine setting depending on the material Rotating discs with double direction of rotation and oscillation, for complete coverage of the workpiece Synchronized oscillation drums, which contribute to uniform contact with the workpiece surface Fast Release system for sanding discs The groups can be extracted laterally, making maintenance and brush changes easier Rubberized feed belt with increased grip, with milled profile for optimal traction Toothed belt transmission and oscillation reducer, which reduces vibrations and noise Linear guides with recirculating balls for smooth and precise movements Schneider electrical components and XINJE frequency converters, guaranteeing reliability and constant control Ergonomic swivel control panel, allowing intuitive operation from multiple positions LED light for increased visibility in the work area Built on a solid metal structure, the SIP610 is designed to withstand demanding industrial environments. The 4 vertical cylinders supporting each sanding group ensure evenly distributed pressure, which helps reduce wear While the SIP610 is recommended for medium-sized workshops or industrial spaces with constant production flow, the SIP810, 813 and 1013 are designed for complex requirements or large work volumes The models in the SIP range are equipped with similar digital control technologies, efficient exhaust systems and industrial-quality components The SIP610 model, with automated functions, precision control and adaptability to various types of panels, is a reliable partner in any production environment. By expanding the range with the SIP810, SIP813 and SIP1013 models, the SIP series completely covers the needs of a modern wood industry Technical support in Romanian - English - German

Condition: new, functionality: fully functional, overall weight: 1,500 kg, total length: 4,825 mm, total width: 1,705 mm, total height: 2,914 mm, Year of construction: 2026, power: 5.5 kW (7.48 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: Ndsdpswyuuiofx Af Sob The ASCO SD COMPACT with Bunker is a powerful, semi-mobile screening machine for recycling, construction, and material processing. Designed for coarse materials such as soil, gravel, wood chips, and waste, it delivers high throughput and smooth, continuous feeding. The integrated bunker ensures steady material flow and efficient pre-screening, while the foldable, modular design allows fast setup and reliable operation across diverse sites. Key Features: • Integrated bunker with conveyor belt for steady, continuous material feed • Adjustable drum rotation speed and screen inclination • Modular design with interchangeable drums and quick replacement system • Vibration support, cleaning brush, and reversible drum rotation • Robust, foldable frame for easy transport and long service life Tech Highlights: Outer drum Ø 1.3 m · Drum L 2.1 m · Qmax 60 t/h · n 5–20 rpm · P 5.5 kW (SD Compact) + 2.2 kW (Bunker) · Hopper opening 2.47 × 1.57 m · Usable screening area 7 m² · Mesh size Ø 6–Ø 100 mm · Filling height 1.81 / 2.91 m · Weight 2,250 kg · Length 4.82 m · Width 1.71 m · Height 1.81 / 2.91 m

Condition: used, see website text Year of manufacture 2026 or Year of manufacture 2025 Nsdpfx Asz Ek R Ejf Ssdb New floor scrubber, DAEWOO type DAFR70 Electric, battery-powered ride-on floor scrubber Serial no. 25DW07004ALE01 Year of manufacture 2026 Theoretical cleaning capacity approx. 3500 m²/h Working width 560 mm Cleaning brush / scrubbing brush Ø 560 mm Brush speed 200 rpm Suction nozzle width: 800 mm Fresh water tank volume: 70 liters Dirty water tank volume: 70 liters Travel speed 0-5.5 km/h Working time per battery charge approx. 3.5 hours Noise level 65 dBa Climbing ability max. 10% Battery voltage 24 volts Mains connection to the charger 230 volts, 50 Hz, with Schuko plug - Battery charger 24 volts, permanently installed in the cleaning machine - 2x drive battery 12 volts, 100 AH = 24 volts, 100 AH - one cleaning brush Ø 560 mm - two separate tanks for fresh and dirty water - electric motor-driven drive on the front wheel - very maneuverable due to 3-wheel chassis Machine length: 1265 mm Machine width: 600 mm Machine height: 1150 mm Machine unladen weight approx. 200 kg Transport dimensions L x W x H 135 x 98 x 140 cm Transport weight approx. 250 kg New machine, from stock New - Original packaging - unused, from stock

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – Efficient. Environmentally friendly. Safe. The future of surface finishing begins here: With wet blasting solutions from Proton Maschinenbau GmbH, you can rely on uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully automated, our systems guarantee precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting systems combine water, compressed air, and a suitable blasting media to create a highly effective cleaning process that offers clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to the integrated jet pulse filter system ✔ Homogeneous, contamination-free surfaces – no chemical additives ✔ Gentle processing of sensitive materials without embedding blasting media ✔ Optimal results for degreasing, paint stripping, structuring, and cleaning ✔ Energy- and resource-efficient process, suitable for numerous blasting media ✔ Ideal for demanding industries such as aviation, medical technology, the automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blasting cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for rim processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotating platform, wash basin, and transport trolley All machines feature: Njdpowdpq Hjfx Af Sjdb 🔧 Stainless steel housing with laser seam 🖥️ Intuitive PLC touch panel with programming and maintenance instructions 💡 LED interior lighting, safety features, and automated media return Areas of application: Cleaning aluminum or plastic molds, deburring precision parts, preparing implants or prototypes from additive manufacturing – we offer the right solution for every application. Proton stands for: 2-year warranty on manufacturing quality, 10-year spare parts availability, personalized consulting, and robust systems "Made in Germany." 👉 Discover the advantages of wet blasting technology now – and reach a new level of surface finishing.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,000 h, load capacity: 3,000 kg, lifting height: 4,915 mm, free lift: 1,669 mm, fuel type: gas, mast type: telescopic, construction height: 2,345 mm, power: 44 kW (59.82 HP), fork carriage width: 1,070 mm, fork length: 1,200 mm, empty load weight: 4,329 kg, total length: 3,633 mm, drive type: Treibgas, construction width: 1,186 mm, LPG Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Telescopic Transmission: Techtronix 100-1-Speed Transmission Speed Class: 20 Condition: Operational and fully functional Technical Condition: Normal Front Tires Type: Superelastic Front Tires Size: 28x9 Front Tires Condition: 60 - 80% Rear Tires Type: Superelastic Rear Tires Size: 6.50x10 Rear Tires Condition: 60 - 80% Description: Machine fully workshop-tested, cleaned, new UVV and inspection completed! Side shifter, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, CE certificate, rotating beacon, windshield wiper, LED, seat, Ndedpfxsynpkye Af Seb drum brakes, Accutouch mini-lever hydraulic control with RTST function.

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door Ndodez Aha Iepfx Af Seb • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Year of construction: 2018, operating hours: 8,580 h, condition: used, functionality: fully functional, machine/vehicle number: E21SI18102702508, This is a combination oven, model SCC 201 WE Elektro, from the premium manufacturer Rational. The unit has undergone a thorough inspection in our in-house workshop, has been fully refurbished, and is in perfect working order. The unit has accumulated 8580 operating hours. Ndjdpsz Etknefx Af Seb The recommended retail price is €21,940.00 (net) / €26,108.60 (gross). The stated price is gross, including 19% VAT. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device model? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or iCombi Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked and fully functional – or your money back. Flexible shipping or self-pickup options. Competent advice - before and after the purchase. Provision of operating instructions, wiring diagrams & spare parts. Inspection according to DGUV V3. This combination oven offers space for 20 x 1/1 GN containers. In automatic mode, the unit independently recognizes the ideal cooking process, the size of the food, the quantity being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport WxH: 925x1900mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SI18102702508 Year of manufacture: 2018 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal insertion: 1/1, 1/2, 2/3, 1/3, 2/8 GN Servings per day: 150-300 Condition: Used, inspected, fully refurbished, in perfect working order. Additional information: In combination oven mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control - self-cleaning. Core temperature probe. Handheld spray nozzle with automatic retraction. 8.5-inch color display and touchscreen. 5 fan speeds programmable. Integrated, maintenance-free grease separation system. Automatic start time preselection. 7 cleaning levels for unattended cleaning - even overnight. Spraying can be adjusted in 3 levels - from 30°C to 260°C. 5 programmable fermentation levels. USB interface. Seamless, tub-shaped hygienic cooking chamber, rounded corners. Halogen cooking chamber lighting. Shipping: Delivery or self-pickup by arrangement. Worldwide shipping upon request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment available upon request. Frame * Steel welded construction with front frame curve and rear bevel * Access ramp with excavator bucket recess in the center = recess in the rear between the longitudinal beams * Approximately 2,300 mm long Integrated into the outer frame * 5 pairs of approximately 4-tonne lashing points (4 x in the low bed and 1 x on the raised platform) * 7 pairs of recessed, pull-out approximately 10-tonne lashing rings (4 x in the low bed, 1 x in the access ramp, and 2 x on the raised platform) Njdsz Ed Auspfx Af Sedb * Standard ball-bearing swivel frame attachments * Extendable widening elements on both sides of the low bed platform with softwood boards, approximately 50 mm thick * (The track width of the construction machinery to be transported must not exceed the outer frame width of approximately 2,550 mm) * 4 pairs of fold-up approximately 10-tonne lashing rings * Arrangement: 1 pair at the front on the raised platform, inside the longitudinal beams * 1 pair at the very back in the excavator bucket recess, left and right * 1 pair at the front on the raised platform, in front of the curve, inside the longitudinal beams * 1 pair in the low bed at the rear, in front of the access ramp, in the bucket recess on the left and right. Towing device * Fixed drawbar with pivoting drawbar eye, approximately 40 + 50 mm, curved design, silent block mounting, drawbar retaining spring with tensioner * Truck coupling height from approximately 840 mm to approximately 1,030 mm PP004059B Drawbar length approximately 1,800 mm Support system * 2 automatic folding supports at the rear Axles * SAF air suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake approximately 300/200 mm, automatic brake linkage adjuster Wheels * 12 tires 235/75 R 17.5, 141J, manufacturer according to factory selection Braking system/Suspension * According to ECE regulation R13 * Dual-circuit compressed air braking system * Braking system manufacturer Wabco, EBS system 4S3M, 1st and 2nd axles monitored RSS/RSP * Stability program * Spring-loaded parking brake on 2nd and 3rd axles * Steel air tank * Brake/air connection lines with 2 single coupling heads, yellow/red EBS/ABS connection cable * Rubber band as a holder for EBS and electrical plugs * Air suspension with raising and lowering device (only on rear axles), automatic adjustment of the driving level from 15 km/h (RTR), with axle stop on the front axle Floor * Softwood floor, approximately 50 mm thick, impregnated, protruding approximately 5 - 10 mm above the frame Steel tear plate cover over wheels Ramps * 2 foldable, one-piece, lightweight steel access ramps * Length approximately 2,800 mm, width approximately 750 mm, with hardwood floor approximately 35 mm, impregnated * Ramps can be shifted in width from an intermediate distance of approximately 350 mm to a maximum overall width of approximately 3,000 mm * Ramps can be locked in the driving position by chains with tensioners * Ramp lifting aid with coil spring * Ramps can be shifted manually from the side with a rod * Square ribs welded on the outside on the ramps and rear access ramp Painting * Steel granulate cleaning * Hot-dip galvanizing * Multi-layer epoxy zinc phosphate primer and spray painting with 2-component polyurethane * Topcoat chassis = RAL 3002 carmine red *

Condition: used, Year of construction: 1997, KEG-plant Additional title: inside cleaning and filling plant Performance: 20 KEG`s/h wash and fill with 30 l KEGs Power: 8 kW Voltage: 400 V Frequency: 50 Hz Nedpfx Afjxbqh Se Sodb Length: 1400 mm Width: 1100 mm Height: 2300 mm Weight: 250 kg Formats: 10 - 50 l KEG drums with flat fitting Operation / Control: OP7 operating console, Siemens Simatic S5 - 95U Material: Edelstahl Position: frei stehend Base construction: Square tube construction on dome feet Features: 1 tank for cleaning agent, electrically heated; 1 combination cleaning and filling station with flat fitting, 1 stainless steel pump, 1 stainless steel control cabinet

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment: Complete equipment available upon request. Chassis * Steel welded structure made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two pockets below the loading platform for one ramp each * With locking plate in the head frame at the rear Under-run protection * Compliant with EC regulations Front bolster * Bolsters with single-sided operation * Rear support: Two adjustable drop-down supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Drum brakes approx. 300x200mm * Center-mounted for twin tires, ABS * Total travel of the air suspension approx. 200mm * Of which lifting approx. 140mm and lowering approx. 60mm * Control via hand lever with detent function Tires * 8x, 235/75 R17.5 * Manufacturer of our choice * Mounted on rim 6.75X17.5 with offset Splash guards * Made of PVC in front of and behind the axles, compliant with EC regulations Load securing * One hole for lashing straps in the outer frame approximately every 150 mm * Tensile force approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, tensile force approx. 8 t * Recess pockets for lashing bars 80/50 * 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Air brake system compliant with EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow * Spring brake acting on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor recessed in the outer frame. Lighting system * Lighting system compliant with EC regulations, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar, incl. connection cable with 15-pin and 2 x 7-pin plugs. Painting * Chassis blasted, cleaned and hot-dip galvanized with state-of-the-art technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of choice * Hubs: KTL black * Under-run protection: RAL 9010 Pure White * Rims: RAL 9006 Silver * Attached parts: galvanized / KTL * Black contour marking: acc. to EC, yellow on the side and rear (with ES-GE logo) Incl. accessories * Rear extension by approx. 800 mm incl. under-run protection * Extendable loading platform * Load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * With screwed drawbar eye approx. 50 mm acc. to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of lashing bars made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locking for 1x20? container, container locking 1 x 20? extendable to approx. 2,820 mm, acc. to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg * 4 x stainless steel toolboxes between or behind the axles * 2 wheel chocks with holder Ndedpfx Asz Dmnksf Sjb * Rotating beacon pluggable at the rear * Delivery of a 40-unit towing device (GG max. 13,500 kg)

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 P = 0.55 kW N = 9 rpm Weight: 450 kg Ndodpfx Afsztxw Sj Seb Dimensions: 630 x 1500

Condition: used, functionality: fully functional, The manufacturer cannot be identified with 100% certainty as there is no nameplate on the entire machine. The machine is located in 06502 Thale. Machine type: Drum melting system for 200-liter containers Material transport: Motor-driven pump Lifting system: Pneumatic Melting system: Heated pressure/melting plate with two rotating seals Control: Separate control cabinet Nodpfx Aszr Edpsf Ssdb A detailed description/documentation of the drum melting system can be found in the appendix.

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 15,000 mm, inner dimension height: 5,000 mm, filter area: 352 m², volume flow: 22 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Ndedpfx Afeu Hy Tpo Sob Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Urban SV 530 with a turning station, configured to process from right to left, in very good condition, complete with internal and external tools for finishing PVC profiles. Upon request, we can install the machine and program it for your specific profile. Ndjdpfx Afez D Ildj Sob

Condition: used, Year of construction: 2018, operating hours: 845 h, CAT CB2.7 roller, manufactured in 2018, with only 845 operating hours! ----* Manufacturer: CAT * Type: CB2.7 * Year of manufacture: 2018 * Operating hours: approx. 845 * Operating weight: 2,510 kg * CAT diesel engine / 22.3 kW * Working width: * Water sprinkling system * Good condition * Video available upon request (WhatsApp Erik) * Price: EUR 14,900, net + 19% VAT Ndjdpfx Aoz Em E Eef Ssb ----For further questions, please call: Erik Kortum: WhatsApp All information is subject to change and without guarantee. Errors and prior sale are reserved.

Year of construction: 2026, condition: new, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,955 kg, total length: 4,330 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD COMPACT with DEC (Drum Extension Compound) is designed for recycling, construction, and material processing, offering efficient screening of coarse materials such as soil, gravel, wood chips, and waste. Its extended drum system increases the screening area by nearly 50%, enabling separation of up to four fractions with high precision. The foldable, semi-mobile design ensures easy transport, setup, and reliable operation across various sites. Key Features: Nedpfx Aowyvfvsf Sodb • DEC drum extension increases screening area and output by up to 50% • Variable drum speed, reversible rotation, and adjustable screen angle • Modular design with interchangeable drum variants and quick change system • Integrated vibration support and cleaning brush for consistent results • Robust, foldable frame for mobility and long service life Tech Highlights: Outer diameter of the drum Ø 1.3 m · Drum L 3.1 m · Qmax 50 t/h · n 5–20 rpm · P 5.5 kW (optional 7.5 kW) · Usable screening surface 10.2 m² · Mesh size Ø 6–Ø 100 mm · Hopper opening 2.24 × 0.85 m · Filling height 1.81 / 2.91 m · Weight 1,955 kg · Length 4.33 m · Width 2.36 m · Height 1.81 / 2.91 m

Year of construction: 2026, condition: new, Galvanized on request. 1. Rotary screen, 1600 mm, length 2800 mm, 4 mm woven wire (others on request), perforation 20x20 mm, drum speed approx. 13.5 RPM, 4 kW, 2. Undersize material elevator. 9000 mm long, 650 mm wide, up to 2300 mm high, 3. Hopper with a length of 3300 mm, a width of 1500 mm with adjustable belt speed via a variable speed drive, 4. Semi-mobile. Mounted on a chassis with wheels and a lower (removable) trailer coupling (without or other – on request), 5. Cleaning brush with a diameter of 300 mm, length 2000 mm, 6. Drum drive via a gear motor + 2 rubber drive wheels with a diameter of 230 mm, 7. Supports with adjustable height, 8. Discharge height (oversize) from the drum 1000 mm, 9. Overall height with brush 3100 mm, overall width 2600 mm, overall length 9700 mm, 10. Equipped with an electrical control panel, switch 0/1, safety stop switch, motor overload switch, 11. Total power supply 9.2 kW, 12. CE certificate, 12 months warranty, manufactured in the EU (Poland), 13. Capacity approx. 50 t/h (topsoil), 14. Weight: approx. 3 tons. 15. Tramec durable gear motor (with speed control in the hopper), 16. FAG and SKF roller bearings, 17. Structures made of closed steel profiles – steel grade S355, 18. Conveyor rollers made of high-quality materials. Only SKF ZZ bearings, Ndedpfsd Rz T Ejx Af Seb 19. Drum construction is protected against corrosion – hot-dip galvanizing (!), 20. Drum structure – S355 steel. Wall thickness 3 mm, perforation to be agreed (option), 21. Brush with adjustable spring. The brush pressure can be adjusted, 22. Electrical sockets and emergency stop switches on both sides of the machine, 23. Drum covers. Powder-coated in the paint booth. We produce rotary screen machines: 1) Stationary, semi-mobile, mobile, 2) Diameter, drum length – on request, 3) Electric, diesel-electric. We have many references in the European Union. We speak Polish, German, English, and Russian.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 41,622 h, controller model: Siemens Sinumerik 840 D, laser power: 3,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale is a TRUMPF TruLaser 5030 fiber (L41) including LiftMaster Compact! The machine will remain powered on until September 23, 2026. Disassembly will be carried out by a certified TRUMPF partner. TECHNICAL DETAILS Laser power: 3,000 W Working area (X / Y / Z): 3,000 × 1,500 × 115 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 20 mm Sheet metal thickness aluminum max.: 15 mm Simultaneous speed max.: 235 m/min Accuracy: ± 0.1 Sheet metal format max.: 3,000 × 1,500 mm Sheet metal format min.: 1,000 × 1,000 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height loading side max.: 90 mm Part size min.: 150 × 150 mm Sheet metal thickness max.: 25 mm Ndodpfxez A S Dzj Af Seb Sheet metal weight max.: 900 kg Stack height unloading side max.: 250 mm MACHINE DETAILS Control model: Siemens SINUMERIK 840D SL Touch color screen: 17" Operating hours: 81,443 / 76,533 / 41,622 h Dimensions & Weight Dimensions (L x W x H): 9,373 x 2,964 x 2,383 mm Weight of base machine: 12,700 kg EQUIPMENT LiftMaster Compact 1530 AL21 Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit water-air Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Solid-state laser TruDisk 3001 with one LLC output Light guide cable according to standard layout Laser cooling unit water-air Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine for height control and sheet metal edge detection Simple workshop programming Extended workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas pressure FastLine USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine enclosure with certified viewing window and door on the right Synchron loader Scrap removal device and double sheet detection Movable removal rake Loading and unloading station Separation of thin sheet metal for synchronous loader Raw material and unpacking station Extended pallet extension on the machine Inventory interface

Condition: like new (used), Year of construction: 2024, functionality: fully functional, It is an semi-automatic machine fitted for small parts cleaning by Ultrasonic. Ndedpfx Afjzvh E Rj Sjb

Condition: used, Year of construction: 2019, operating hours: 430 h, CAT CB1.7 roller, manufactured in 2019, with only 430 operating hours! ---- * Manufacturer: CAT * Type: CB1.7 * Year of manufacture: 2019 * Operating hours: approx. 430 * Operating weight: 1,690 kg * CAT diesel engine, 18.4 kW * Working width: approx. 0.9 meters * Good condition Nodpfx Afjz Em Dzs Sodb * Video available upon request (WhatsApp Erik) * Price: 12,500 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is subject to change and without guarantee. Errors and prior sale excepted.

Condition: used, Year of construction: 2016, operating hours: 1,764 h, Hamm HD14VV roller, manufactured in 2016, with only 1,764 operating hours! ----* Manufacturer: HAMM * Type: HD14VV * Year of manufacture: 2016 * Operating hours: approx. 1,764 * Operating weight: 4,345 kg * Kubota diesel engine Nsdpez Em Efjfx Af Ssdb * Working width: 1.38 meters * Good condition * Water spray system * First owner * Video available upon request * Price: 17,500 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee and liability; errors and prior sale are reserved.