Used Drum Chipper for sale (3,365)

Condition: new, Year of construction: 2021, protection type (IP code): IP54, type of cooling: air, Specification: Cross feeding chain conveyor; Inclined separator, reversible; Longitudinal chain conveyor, reversible incl; Itsbkuow Uqqnor Ivfjn Cleaning roller conveyor; Flat belt conveyor with metal-free zone, reversible; Metal detector; Crane for contaminated material; Vibratory feeding table; Drum chipper „ORIGINAL PALLMANN“, type PHT 850 x 1250 with mechanical clamping system (3 knives-rotor); Auxiliary exhaust system; Trough belt conveyor for bark; Scraper conveyor; Double screw conveyor; Trough chain conveyor, type Z-1600/2; Electric design & automation. Crjde Afxc Aopfx Aiisi

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm Credpfsu Rl Rusx Aiiei max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included

Condition: used, Drum Chipper Bruks 802 CM Drum chipper by the Swedish manufacturer Bruks Mekaniska AB (Arbrå, Sweden). Suitable for sawmill offcuts, edgings and other wood residues. Technical data: Manufacturer: Bruks Mekaniska AB (Sweden) Csdpo Afwxbefx Aiiori Type: 802 CM Serial no.: 6710-214 Capacity: 30–60 m³ chips/h Main motor: 75 kW Drum diameter: 800 mm Number of knives: 2 Infeed opening (W × H): 540 × 300 mm Max. solid wood thickness: 250 mm Drum speed: 720 rpm Feed rollers (upper/lower): 2/4 Feedwork power: 2.2/5.5 kW Weight: 3600 kg Dimensions (L × H × W): 2195 × 1650 × 1695 mm

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Csdpeuhvhpefx Aiieri Electrical motor 75 kW

Condition: used, BRUKS 1700 ML industrial drum chipper designed for processing logs, slabs, offcuts and other wood waste into high-quality wood chips. Suitable for demanding sawmill and biomass production. Technical specifications: Manufacturer: BRUKS Model: 1700 ML Codpozpwaqsfx Aiisri Capacity: up to 100 m³/h Chip length: 15–30 mm (up to 50 mm) Chipper disc diameter: 1700 mm Number of knives: 4 Knife dimensions: 525 × 180 × 16 mm Disc speed: 530 rpm Infeed opening: 500 × 300 mm 2 upper and 6 lower feed rollers Feed drive power: 2 × 4 kW Required chipper motor power: 75–150 kW Weight: approx. 5 500 kg

Condition: used, Drum wood chipper IDC000024 - Manufacturer: Erjo, - Model: 204 MA, - Capacity: 20 - 40 m3/val., Cedjtqz Sbepfx Aiisri - Weight: 3000 kg, - Electric motor: 30 kW.

Condition: refurbished (used), Year of construction: 1990, Drum chipper / chipping machine / wood shredder fully reconditioned (workshop-reconditioned) Make: Rudnick & Enners Year of manufacture: 1990 Rudnick & Enners drum chipper, type TH-200/650/3 workshop-refurbished (fully reconditioned) with new bearings (spherical roller bearings) and tested rotor New blades and counter-blades Feed width/height: 650 x 200 mm Rotor diameter: 600 mm Screen mesh size: 50 x 50 mm Drive power: 75.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,500 kg Csdpozq Sqgsfx Aiiori Machine colour: RAL 6011 Reseda green Without electrical installation and without control cabinet

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Crjdpfjw U A Sksx Aiiei Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use Crodpfx Aiow I R Rnoiei - Customised production

Condition: excellent (used), Catalog number: 7924 TECHNICAL DATA dimensions of the top of the loading hopper length/width 500x600mm hopper length 2070mm shaft width 550mm engine 55kW number of knives 4 pcs outlet for shredded wood rectangular 560/360mm dimensions length/width/height 3950x1520x2820mm weight approximately 2500kg – drum chipper – 4 knives on the shaft – additionally, a built-in fan for blowing out wood chips – very good condition – used chipper Net price: 23900 PLN Net price: 5558 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR Cjdpfx Ajzr U Uqsiieri (the price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 Crsdpfx Aio Aggbqjioi TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES - German-made - with conveyor belt - auto-reverse - used shredder, very good condition Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7899 Technical data: - inlet cross-section of the chipper: 410mm x 180mm - shaft width: 430mm Crjdpfxozu R Urs Aiioi - shaft diameter: 400mm - number of knives: 2 pcs - screen size: 60x60mm - top: driving shaft, toothed - bottom: 2 driving shafts, toothed - length of the infeed conveyor: 2180mm - width of the infeed conveyor: 400mm - auto-reverse (adjustable) - main motor: 30kW - feed motor: 2 x 2.2kW - machine dimensions (L/W/H): 4300x1600x1100mm - weight: approximately 2000kg ADVANTAGES: - Polish production - Auto-reverse (adjustable) - With infeed conveyor - DTR documentation - Used chipper, very good condition Net price: 69900 PLN Net price: 16256 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * Csdpsuz Hmxefx Aiisri - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm Cjdpfx Aijnyidbjiori - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg Csdpfx Aswbv Ereiiori *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor - 30 m/min Feed speed - 37 KW Mainmotor Crjdpsful Uiofx Aiiji - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TH 600 / 1050 / 11, overall weight: 35,000 kg, type of input current: three-phase, total height: 2,310 mm, total length: 4,400 mm, total width: 2,906 mm, input voltage: 380 V, feed length X-axis: 1,054 mm, feed length Z-axis: 651 mm, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 600mm Chipping Width : 1050mm Rotor - Diameter : 1600mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 50-150 rm/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Crodsw S In Espfx Aiisi Electric Motor : 2 x 400kW Voltage : 380-400V Geared Motors : 2 x 15kW Sew Eurodrive Infeed Rollers : 11 Pcs Feeding : Horizontal Drive : By Belt GT54 x 2

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Crjdpfegabfbox Aiisi Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg

Condition: used, Year of construction: 2022, operating hours: 100 h, functionality: fully functional, type of input current: three-phase, input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, Fully automatic filling machine from the Boloni brand. ATEX-certified. Suitable for filling 25L containers. Filling by weight using load cells. The machine fills 4 containers simultaneously. Automatic capping and palletizing robot. Connection between the various components via conveyor belts (steel). Cjdpfxozx Urio Aiieri The machine has only been used for a limited number of hours. The machine is available for immediate delivery.

Condition: repair required (used), Year of construction: 2002, Hacker chipper requiring overhaul with a 1300 mm rotor width 45 kW motor approximately 50 knives, 40 x 40 mm, on the rotor The chipper runs, but the gearbox wobbles on the rotor stub It is still possible to chip material, but it will need to be repaired at some point Cjdpfo Ah T R Tox Aiisri Large hopper on top, approximately 2.4 x 2.4 m

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Csdpfx Aijqmi Irjieri Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Year of construction: 2026, condition: new, functionality: fully functional, Drum for Doppstadt screener SM 518 and SM 620 on stock. Crjdpfx Aiefi Tqbjiji CHECK AVAILABLE PERFORATIONS. We manufacture and provide drums for mobile and stationary screeners, for : - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 - Doppstadt SM 620 - Doppstadt SM 718 - Doppstadt SM 720 - Doppstadt SM 725 also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality.. In case of any question, please contact me by mobile or e-mail.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 14-35-15-10-02, The device is made of AISI 304 stainless steel. It has been lightly used and stored in a warm, dry area. The device is currently not in use, but it can be started after prior arrangement. Technical documentation, including a CE declaration, is available. - Total drum length: approximately 3100 mm. - Total drum height: approximately 2050 mm. - Inclination angle: 0 to -6º - Maximum drum diameter: 800 mm. - Motor rotational speed: 1.375 rpm - Gearbox ratio: 25.00 - Service factor: 2.2 - Rated motor power: 0.750 kW - Motor supply voltage: 230/400 V Additional information can be found in the attached photos. Cjdpfxe Af Ihco Aiieri

Year of construction: 2016, operating hours: 7,790 h, condition: excellent (used), Doppstadt SM720 SA Profi rotary screening machine - Year of manufacture: 2016 - Operating hours: 7790 - Drum dimensions: 7100x2000 - Particle size: 8mm x 8mm - Side conveyor belt: 5m - Rear conveyor belt: 5m Codpo Ah Ug Eefx Aiieri - Additional hydraulics - Remote control - Other screening drums available Machine is available immediately.

Year of construction: 2004, condition: ready for operation (used), machine/vehicle number: 12800/280.2005, The device is made of stainless steel, is in good working order, and is stored in a dry and warm hall. Technical documentation is available in paper form, in German and English. Key technical data is provided below: Drying drum diameter: 1200 mm Electrical heating power: 84 kW Drum length: 4000 mm Drum rotation speed: Continuously adjustable Drive motor power: 0.75 kW Extrudate drying capacity: 240-550 kg/h Description: The system offers highly efficient infrared drying through the use of electro-quartz elements – radiators made of high-quality quartz glass and coated with a gold reflective layer. The drum rotates on silent support rollers, the system meets safety requirements, and reduces energy losses. Cedpfj Ahgp Rex Aiijri Heating radiators are available, currently disassembled.