VDL 2B Drum (Scroll) Washing Machines™

DOLFIN INDUSTRIAL PART WASHING MACHINE

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system type L122 automatically working hot water chamber washing machine with basket drive by gear motor, housing of the unit made of stainless steel 1.4301, - 2 pieces 3-sided arranged nozzle systems made of stainless steel with stainless steel flat spray nozzles, - 2 pieces washing pumps made of stainless steel (Fab. Xylem/Lowara), - level control as protection against dry running - 2 pcs. suction filter as pump protection - Oil skimmer for bath maintenance Lhsdohl Ic Repfx Agzjc - basket diameter: 1.150 mm - useful height: 700 mm - max. loading weight: 300 kg - spray pressure: 2x 3 bar - tank capacity: 270 liters - heating: electrically adjustable (RT - 60°C) - connected load (electric): approx. 11,5 kW - plant dimensions (WxDxH): 1.480 x 1.540 x 2.195(h) mm

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. Ljdsv Sa I Tspfx Agzshc

Year of construction: 1984, condition: used, max. temperature 1.050 Grad size of opening 380 x 230 mm depth of chamber 680 mm volume 60 L Lhodpfxji Db Dbs Agzec voltage 380 V total power requirement 19,0 kW weight of the machine ca. 540 kg dimensions of the machine ca. 1,15 x 1,35 x 1,65 m - Serial-No.: 13817

Condition: excellent (used), Year of construction: 2024, operating hours: 3,855 h, functionality: fully functional, machine/vehicle number: 1200F001894YW, Loading weight: 115–128 kg Ljdpfx Aew Nw Eusgzshc Drum volume: 1154 l Filling ratio: 1:10 – 1:9 Spin speed: 695 rpm G-factor: 350 Standard features: - Direct steam heating - Freestanding, high-speed - Machine housing made of chrome-nickel steel (AIS 304) - Inner and outer drum made of chrome-nickel steel - Perforated inner ribs / PowerWash - Higher mechanical action - Low water consumption - Intuitive touch control XCONTROL FLEX PLUS

Year of construction: 2016, condition: like new (used), High throughput twin lane tray sealer. Has been packing layered salads in round bowls. Cost in excess of £300k when new in 2016. Lsdpfeilfkgox Agzshc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Including 4th axe TSUDAKOMA . Cooling threw spindle 30 bar. Control Fanuc 0i-MD. Lodpfx Aoycg Npjgzehc Including probes. Axes ( X/ Y/ Z ) mm 1.000 / 550 / 500 Table 1.100 x 502 mm Table loading kg 700 Spindle revolutions 12.000 rpm Spindle BT40 Number of tools 24 Machine dimensions mm 3.335 x 2.200 x 2.670 Weight kg 6.500 control - Fanuc 0i-MD

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Lhodpfx Ajx Tti Segzoc Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: new, Year of construction: 2021, Pick and place robot Model: KUKA 3 D1200 HM/SEL Year of production: 2021 Payload: 3 kg Lhsdpfxot Ah Ewj Agzoc Reach: 1200 mm Control: KR C5 KSP Price for single robot: 1̶5̶.̶3̶0̶0 / 9,600€/pc. Price for robot in cell: 11,700€/pc.

Condition: excellent (used), Manufacturer: Yamazaki Mazak Corporation Model: Nexus VCN-510C Machine type: Vertical CNC machining center Lhsdpfx Agsyha Ivezjc Control: MAZATROL 640M X-axis travel: 1,050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Worktable: T-slot table, moving table Tool magazine: Automatic tool changer (ATC) Control cabinet: Yes Additional equipment: Lubrication system Weight: 7,100 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Technical Data VESTA-1000/12K Travels Axis travels (X/Y/Z) mm: 1,000 / 550 / 500 Distance table surface – spindle nose mm: 130 – 630 Axis guideways: Linear rolling LM guides Table Working surface mm: 1,100 x 502 Maximum load kg: 700 Table configuration mm: 5x T-slots (width 18 mm, pitch 80 mm) Spindle Maximum speed rpm: 12,000 Spindle power (10 min / continuous) kW: 18.5 / 11 Feeds Rapid traverse (X/Y/Z) m/min: 36 / 36 / 30 Working feed (X/Y/Z) mm/min: 1 – 24,000 Feed motor (X/Y/Z) kW: 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Pull stud: MAS P40T-1 (45°) Number of tool stations pcs: 24 Max. tool diameter mm: Ø 80 / Ø 150 (without adjacent tool) Max. tool length / weight mm / kg: 300 / 8 Tool-to-tool change time sec: 2.5 Chip-to-chip change time sec: 4.3 Magazine & changer type: Disc magazine with rotary arm Power Supply Connected load kVA: 30 Tank Capacities For spindle lubrication/cooling l: 6 / 20 For coolant l: 380 Machine Dimensions Height mm: 2,670 Floor space (L x W) mm: 3,335 x 2,200 Weight kg: 6,500 Control System Fanuc 0i-MD Standard Equipment - Spindle air purge - Machine alignment elements - Machine protective guarding - Auger conveyor in working area - Cooling system - Safety doors - Ethernet interface - CNC system software options by HWACHEON: - OPTIMA (feedrate optimization) - HAI (40-block memory, AI nano contour control) - HTLD (tool load monitoring) - HTDC (thermal displacement compensation for spindle and machine frame [HTDC=HSDC+HFDC]) - HECC (accuracy or speed preference in machining) - Centralized lubrication system - Lubricant oil evacuation to dedicated tank - Electronic handwheel - Operating documentation in Czech - Pneumatic system - Program capacity: 1,280m (512kb) - Rigid tapping - 3-color status signal light - Spindle jacket cooling - Air dryer (included) - Work area lighting - 10.4" color LCD display - CE certificate - Transformer - Through-spindle coolant 30 bar - Manual Guide i Lhodpfx Aox Rzhdegzec - Chip conveyor - Workpiece and tool probes - 4th axis direct control by Fanuc CNC system via M-codes (or independent controller usable for another machine)