Used Fence Manufactureing Machine for sale (85,845)

Condition: used, Manufacturer: HERMLE Nwodpjz E Axhefx Af Sjl Model: C 40 U dynamic Machine type: 5-axis universal CNC machining center Year of construction: 2006 Machine No.: 1XXXX Control system: SIEMENS SINUMERIK 840 D Condition: extremely good / exceptionally well-maintained CE marking: available Original HERMLE documentation: available Travel ranges X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm Dynamic feed drive Rapid traverse X/Y/Z: 60 m/min Acceleration: 10 m/s² Feed force: 8,500 N Dynamic feed spindles X-axis: Ø 40 / 20 mm Y-axis: Ø 50 / 40 mm Z-axis: Ø 40 / 30 mm Main spindle Spindle speed: 18,000 rpm Tool interface: HSK A63 Internal coolant supply: 80 bar Compressed air through the spindle center Tool magazine Tool positions: 38 Tool interface: HSK A63 Automatic tool changer NC swivel rotary table Table type: SRT 800 Table diameter: Ø 800 mm Maximum table load: 1,400 kg A-axis total range: 135° A-axis: minus 110° to plus 25° C-axis: 360° 6-fold rotary through-feed Parallel T-slots: 14 H7 Measuring system / Accuracy Direct linear measuring system X/Y/Z Resolution: 0.1 µm Input unit: 0.1 µm Display increment: 0.1 µm Position tolerance Tp X/Y/Z according to VDI/DGQ 3441: 0.008 mm RENISHAW measuring probe 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS Coolant and chip disposal system Internal coolant supply: 80 bar KNOLL high-pressure coolant system KNOLL filter system Scraper conveyor Chip flushing gun Chip cart: 200 liters Compressed air through the spindle center Oil mist extraction KNOLL KF 200/1000 Manufacturer: KNOLL Maschinenbau Type: KF 200/1000 Year of construction: 2006 KNOLL 850 K 1 Year of construction: 2006 Equipment NC swivel rotary table Ø 800 mm RENISHAW measuring probe Direct linear measuring systems X/Y/Z 3D tool radius compensation In-process measurement Electronic thermal compensation SIEMENS 6-fold rotary through-feed Internal coolant supply 80 bar KNOLL coolant and filter system Scraper conveyor for chips Chip cart 200 liters Compressed air through the spindle center Chip flushing gun Oil mist extraction Manual cabinet door Manual cabinet roof Laminated safety glass panes Machine lighting German documentation Original HERMLE machine documents CE declaration of conformity NAS acceptance test in customer's plant Electrical data Operating voltage: 400 V / 3 phases Mains frequency: 50 Hz Control voltage: 24 V DC Total rated current: 63 A Total connected power: 43 kVA Connection cable cross-section: 16 mm² Minimum short-circuit strength of the power grid: 2.50 MVA IKZ electrical data Connection: 400 V / 3 PH / 50 Hz Control voltage: 24 V DC Fusing: 50 A Cable cross-section: 10 mm² Connected load: max. 16.6 kVA Dimensions / Weight Net weight according to nameplate: 10,500 kg Transport weight standard machine: approx. 10,300 kg Transport length: approx. 3,154 mm Transport width: approx. 2,354 mm Transport height standard: approx. 2,892 mm Transport height with Z motor removed: approx. 2,743 mm Transport height with Z motor and energy chain removed: approx. 2,640 mm Control cabinet cooling Manufacturer: RITTAL Type: Blue e+ SK 3185830 Year of construction / Production date: 2025 Cooling capacity: 1.60 kW Power consumption: 0.70 kW Temperature range: minus 20 to plus 60 °C Protection class internal circuit: IP55 Condition The machine is in extremely good and exceptionally well-maintained condition. Extensive original documentation and machine configuration available.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. Nodpsxp Urdjfx Af Sewl This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Nodpsxpxyrjfx Af Sewl Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: used, machine/vehicle number: TP121, Used AROL 8 head capping machine - 16000 BPHTechnical Specifications & Performance DataThis rotary capping machine is engineered for high-efficiency closure application on PET bottles across beverage and food sectors. Manufactured by Arol, it features an 8-head rotary configuration designed to deliver stable throughput and precise cap application at industrial speeds. Its compact footprint and ergonomic working height support streamlined operation within modern bottling equipment layouts and industrial packaging environments.Manufacturer: ArolMachine type: Rotary Capping MachineModel: 8 testeNo. of capping heads: 8Maximum speed: up to 16,000 bphContainer material: PETNeck/closure specification: 38 mm threadRotation direction: CounterclockwiseTransfer type: Body handlingMaximum bottle height: 320 mmWorking table height (H): 1200 mmElectrical supply: 400 V, 3 PH, 50 HzAdvanced Automation & Control SystemsBuilt for consistency and reliability, this rotary capper supports precise application of 38 mm plastic screw closures on PET containers. The 8-head turret ensures uniform torque distribution and repeatable performance across sustained production runs. The electrical configuration (400 V, 3-phase, 50 Hz) aligns with common industrial power standards, facilitating straightforward integration with existing control panels and line PLCs. Quick format adjustments and operator-friendly settings help reduce changeover times and improve uptime in beverage production and industrial packaging operations.Production Line Integration CapabilitiesThe machine integrates seamlessly into a used bottling line or a new installation as a standalone capper. Counterclockwise rotation and body-handling transfer allow smooth infeed/outfeed with standard conveyors. A cap elevator is available as a separate option to automate cap feeding and maintain continuous operation. Bottle handling supports PET formats within a height range up to 320 mm, enabling multi-product flexibility across water, soft drinks, wine, beer, milk, and oil lines.Machine Condition & Maintenance HistoryThe unit is ready for operation. It has been overhauled and is offered with a 6-month warranty. Supplied with compatible spare parts, it is presented in ready-to-use condition and available on an “as seen and approved” basis—ideal for facilities seeking a dependable second hand capper with minimized commissioning time.Operational Performance & VersatilityDesigned for PET containers with a 38 mm threaded neck, this rotary capper suits a wide scope of beverage and food applications. It is an excellent fit for water (still and sparkling), soft drinks (CSD), wine, beer, milk, and edible oil. The 8-head configuration balances speed and gentle handling, maintaining product integrity and closure quality at up to 16,000 bottles per hour. Its industrial-grade build and precise head motion support consistent sealing performance within demanding production schedules.Installation Re... Nedpfxjz E Dkre Af Sewl

Condition: used, Year of construction: 2009, machine/vehicle number: CA82, Used ROBINO & GALANDRINO capsuling machine - Year 2009Technical Specifications & Performance DataThis automatic capsuling monoblock is engineered for precision capsule application on bottles within a professional bottling environment. Manufactured by Robino & Galandrino, the SUPERBLOC series is renowned for robust construction, reliable operation, and high-quality finishes on glass bottles used in beverage production. The model identified is SUPERBLOC M 4 T, built in 2009 and CE marked for compliance with European safety and machinery directives. This second hand machine is suitable for integration in a used bottling line, supporting industrial packaging requirements for beverage producers.Manufacturer: Robino & GalandrinoModel designation: SUPERBLOC M 4 TYear of manufacture: 2009Machine type: Automatic capsuling monoblock (rotary platform)Container compatibility: Glass bottles (cylindrical and common wine-style profiles)Marking: CEApplication: Industrial beverage packaging and bottlingAdvanced Automation & Control SystemsDesigned for consistent capsule application with minimal operator intervention, this monoblock typically features synchronized drives and an integrated control panel for recipe management and format changes. Safety interlocks and guarding protect operators, while emergency stop circuits meet CE standards. The automation concept supports precise capsule positioning and repeatable performance across production runs.Integrated control panel with machine diagnosticsAutomatic magazine feed and capsule distribution (depending on configuration)Quick adjustment for bottle height and capsule lengthCE-compliant safety circuits and guardsProduction Line Integration CapabilitiesThe SUPERBLOC M 4 T is designed to operate inline with upstream and downstream bottling equipment. It couples efficiently with fillers, corkers, wirehooders, and labelers via standard conveyors. Format changeovers accommodate common glass bottle sizes used in beverage production, enabling flexible operation within mixed-format lines.Inline or standalone operation with synchronized conveyorsCompatible with upstream corking/capping and downstream labelingFormat change components for multiple bottle diameters and heightsMachine Condition & Maintenance HistoryManufactured in 2009 and CE marked, this second hand capsuling monoblock reflects the durable engineering of Robino & Galandrino equipment. The SUPERBLOC platform is known for accessible maintenance points, rugged mechanical assemblies, and availability of wear parts, supporting long-term reliability in beverage production environments.Operational Performance & VersatilityThis capsuling monoblock is suitable for a variety of capsule materials commonly used in beverage packaging. Depending on the installed heads and accessories, it can process PVC shrink capsules, polylaminate aluminum capsules, and specialized capsules for sparkling programs. The rotary layout ensures consistent application and alignment, del... Nwedpfx Asz E Di Isf Sjl

Condition: used, Year of construction: 2005, XYZ Proturn SLX 555-2M CNC/Manual Lathe. S/No. SBLG 00041 (2005) with Proto Trak SLX Control (Control Retrofitted 2019), Chuck Size 310mm Diameter, Gap Bed, Swing Over Bed 660mm Diameter, 2000mm Between Centres, 3 Position QCTP, Spindle Speeds 30 - 1800rpm Nwjdpezy N Inofx Af Sol Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ Nwodsz Agzdopfx Af Sel EQUIPMENT Collets Toolholders Additional accessories

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Njdpfezg D I Ajx Af Sjwl NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: good (used), Hello, -The subject of sale is. -Hang 87D 3P double-head riveter. -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. -Cardboard thickness 0.2-4mm Nwjdpov I E Scefx Af Ssl -Weight 570kg -380V power supply -Possible transport by freight forwarder (individual valuation)

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Nodpeyrhb Sjfx Af Sewl Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: used, Year of construction: 2008, machine/vehicle number: SO145, Used PLASTIBLOW PB1H-D blow molding machine - Year 2008Technical Specifications & Performance DataThe Plastiblow PB1H/D is a used industrial blow molding machine designed for producing plastic bottles through extrusion blow molding. Built in 2008, this double-carriage machine is configured with a single extrusion head and is suitable for manufacturing two 1.0L bottles simultaneously. It is a practical solution for manufacturers seeking second hand industrial packaging equipment for bottle production.Manufacturer: PlastiblowModel: PB1H/DYear: 2008Speed: 1L format 600/700 bottles/hour ( 2 cavity mold) Configuration: Double carriage, single headProduction configuration: 2 bottles of 1.0L produced simultaneouslyElectrical supply: 400V, 50HzExtruder configuration marking: E50/26Conformity marking: CEAdvanced Automation & Control SystemsThe machine is equipped for operation on a 400V, 50Hz electrical supply. Its double-carriage arrangement supports alternating mold movements during the blow molding cycle, helping organize bottle production around the molding process. The single-head layout is intended for a two-bottle 1.0L production configuration.For a used bottling line or dedicated plastic packaging installation, the machine should be integrated with suitable electrical protection, process controls and operator-access safeguards appropriate to the final production environment.Production Line Integration CapabilitiesThis Plastiblow blow molding machine can serve as the bottle-production stage of a PET or plastic container packaging system, depending on the material and tooling installed. It can be positioned upstream of downstream bottling equipment such as rinsing, filling, capping, labeling and secondary packaging machinery.The double-carriage configuration is suited to installations requiring a compact bottle manufacturing process before beverage production or other industrial packaging operations. Mold selection, neck finish, bottle geometry and resin compatibility should be matched to the required container specification and the downstream filling line.Machine Condition & Maintenance HistoryThis 2008 Plastiblow PB1H/D blow molding machine is presented as ready for operation. The available identification data confirms the machine model, electrical supply and CE marking. Before commissioning, routine inspection of the extrusion system, molds, cooling circuits, pneumatic equipment, safety devices and electrical components is recommended as part of normal installation and startup procedures for second hand machinery.Operational Performance & VersatilityThe PB1H/D is configured to make two 1.0L bottles at the same time using a single extrusion head and double carriage. This arrangement supports repeatable production of matched bottle formats where a two-cavity mold configuration is required.Blow molding equipment of this type forms hollow plastic containers for use across industrial packaging applications. Final production capability depends on the installed mold set, extrusion tooling, resin, process settings and au... Nwsdpfxjz E Dfpe Af Ssl

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Njdpfx Afjzrnkre Sowl Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is operating flawlessly and has been under continuous Quadient maintenance. The latest service report from December 2025 is attached! TECHNICAL DETAILS Processing speed max.: 6,000 items/hour Document speed max.: 6,000 documents/hour Monthly volume max.: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: less than 3 mm Minimum clearance in the depth direction with package thickness less than 3 mm: 6 mm Minimum clearance in the width direction with package thickness less than 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in the depth direction with package thickness 3–6 mm: 12 mm Minimum clearance in the width direction with package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight above C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Neck angle: 5–20° MACHINE DETAILS Counter reading: 3,617,695 Nwedpfozzqabox Af Sol Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Enveloping module Output conveyor Conversion with C4 float switch Gluing possible with distilled water Matching base cabinet

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section Nwjdpfx Aszf Nk Tjf Sol SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, Univ. Universal milling machine TOS, type FN 32 Year of manufacture: approx. 1980 Travel distances: X: 450 mm, Y: 240 mm, Z: 380 mm Table size: 700 x 300 mm Spindle mount: SK 40 - M16 Spindle speed: 63-2000 rpm, 18 steps Feed rate: 8-400 mm/min, 18 steps Rapid traverse rate: approx. 1400 mm/min Tailstock travel: 90 mm Main spindle motor power: 2.2 kW Connection power: 400 Volt, 50 Hz - 2-axis digital display Heidenhain, type 731B for the X and Y axes - Vertical milling head with boring quill, swiveling +/- 90° and horizontally extendable - Spindle speed via 18 gear stages - Coolant system in the machine base - Electrical control cabinet on the side of the machine Njdpfsz Ebu Uex Af Sowl - Fixed angle table - Support for horizontal milling - Keyway broaching attachment, 16 to 105 strokes, stroke up to 70 mm, swiveling +/- 90° - 1 piece tool holder SK 40 with slitting cutter - Control cabinet located beside the machine Space requirement L x W x H: 1500 x 1200 x 1970 mm Weight: 1650 kg Good condition

Condition: used, Year of construction: 2018, Control Siemens x-travel 750 mm y-travel 660 mm z-travel 650 mm Swivel range 0 - 180 ° Swivel time (0°–180°) ca. 5 s X-axis acceleration 6 m/s² Z-axis acceleration 9 m/s² Nsdpfx Afjyrt A Ij Sewl Y-axis acceleration 6 m/s² spindle tunring speed 12.000 U/min spindle diameter in front bearing 80 mm Torque S6-40% 210 Nm tool taper HSK 63 number of tool places 120 Pos. The machine was used for machining aluminum and, in our assessment, is in good used condition. It can be inspected under power by appointment. Technical features & accessories: - Twin spindle - 5-axis - Pallet changer - Minimal quantity lubrication Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2000, condition: used, Milling stop adjustment: via handwheel Milling stop measurement display: Siko counter Nwsdpfxjy A Hi Ro Af Ssl Milling jaws adjustment: handwheel Milling jaws measurement display: Siko counter

Condition: good (used), Year of construction: 2007, operating hours: 52,506 h, functionality: fully functional, punching force: 180 t, sheet thickness (max.): 6 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,660 mm, punching diameter: 76 mm, workpiece weight (max.): 230 kg, overall weight: 16,000 kg, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, space requirement width: 6,800 mm, space requirement length: 7,600 mm, space requirement height: 2,500 mm, Equipment: safety light barrier, Special equipment: + MultiShear function + MultiTool function + Brush tables Standard equipment: - Safety light barriers - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives Nsdpfjz En Iuex Af Sjwl - Automatic repositioning - Tool length compensation - Small parts chute 500x500 mm - Punching slug extraction - Tool spray lubrication - Automatic tool change - Programmable punching tool lubrication with 2 containers - Programmable stripper - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphics programming - Online diagnostics via modem - Operating manuals.

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, automatic infeed electro magnet plate Nsdez Entkopfx Af Sswl dressing device coolant device Technische Daten / technical details: max. Schleiflänge / max. grinding length 400 mm max. Schleifbreite / max. grinding width 200 mm X-Achse, Tischlängshub / X-axis table longitudinal travel 420 mm Z-Achse, Querweg / Z-axis cross travel 190 mm Schleifscheibenabmessungen / grinding wheel dimensions 225x25x51 mm Anschlussleistung / drive capacity 7 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 2008, operating hours: 1,780 h, functionality: fully functional, Controller WINMAX DSM Double screen Table size 1020 x 510 mm Nwedpfxez Ellds Af Sol Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit - Chip conveyor - SW options: 3D, pocket islands, rigid tapping, DXF, NCPP, ISNC, select surface, advanced graphics, material and tool databank - machine mounths

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Nwsdpfxsz Ek D So Af Sjl Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347141 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel ranges X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: Njdpez Eh Uuofx Af Sewl >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. The conversion from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site under power. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Working area X: 3400 mm HSD electrospindle, ISO 30 mount – max. 18,000 rpm 2 automatic tool changer magazines Nedpfxez Ebyqe Af Sjwl Tool changing positions: 10 + 2 Work table with 4 clamps and automatic positioning Barcode reader Overall dimensions: 5,472 mm x 1,900 mm x 2,200 mm

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Nwedpfx Ajwkkpqsf Sol Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: good (used), Year of construction: 2012, Traverses X Y Z; 1020 x 610 x 610mm, Table size 1200 x 600mm, Table load 700Kgs, Table to spindle 100-710mm Spindle taper BT40, Spindle speed 12,000rpm, spindle motor 18.5KW, 30 station ATC, Heidenhain TNC530, Nwjdpfx Afez Ehxgo Sjl through spindle coolant, swarf conveyor 4th and 5th axis unit.