adjustable gear motor, variable speed gear motor, electric motor
-Motor power: 0.55 kW
-Speed range: 64-218 rpm
-Motor: adjustable
-Drive shaft: Ø 19 mm
-Construction: B3/B14
-Number: 1 piece of motors available
-Price: per piece
Ywl0ryrb
-Dimensions: 570/180/H270 mm
-Weight: 20 kg
including telescopic stop
Buhicftubk
including 2 folding stops
No. 3380132
Adjustable belt grinder make FORMAT type BS 75
Bvzfswm9bw
Technical data:
Belt grinding length 2000 mm
belt grinding width 75 mm
power connection 380 V
with
- height adjustable grinding head
used, special price, as on stock
Welding rotary table APS 1500 KG load capacity
Swivels around its own axis
Xjnw0
Height adjustable by 180 degrees inclination
with foot remote control
Speed infinitely variable from approx. 0,001 to 3 rpm.
Hollow shaft 65mm
height to middle tilted minimum: 800mm
height to middle tilted maximum 1260mm
height horizontal 1240mm
TOP condition, runs totally quiet
double spiral
wire diameter 1,5-3,8 mm
mesh width 20-80 mm
working width 2000 mm
capacity - m²/hour 150 m²
tolling for mesh 50 mm
C08cidius
adjustable gear motor, variable speed gear motor, electric motor
-Motor power: 0.37 kW
-Speed range without angular gear: 358-1850 rpm
-Speed range with angular gear: 24-115 rpm
-Motor: adjustable
-Hollow shaft: Ø 22 mm
-Construction: B5 angle
-Number: 1 piece of motors available
-Price: per piece
2fchhtqtu
-Dimensions: 455/190/H200 mm
-Weight: 12 kg
Make Guhdo
used, great condition
HM
permanently equipped
Dimensions 250 mm x 10.2 - 20 mm x 30 mm
Brgiupohd8
Number of cutting edges 4/8 pieces
Pre-cutter 4/8 pieces
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
Hydraulic notching machine make BOSCHERT type K 30-180/ CNC
year of construction 1989
for notching all angles from 30° to 180
technical data:
cutting capacity steel ST 40 4 mm
Cutting capacity stainless steel 3 mm
Blade length 200 mm
Cutting length 200 x 200 mm
Cutting angle adjustable 30 - 180
table height 900 mm
electrical connected load 8 KVA
hydraulic oil filling 30 litres
outer dimensions L x W x H 1500 x 1000 x 1930 mm
weight 1950 kg
without stop
with
- control PC 2000 for setting the cutt...
Welding rotary table height adjustable 4 tons load capacity
Complete set with hand and foot remote control
Welding current transmission 600 Ampere
Height tilted min. 870 mm
Height tilted max. 1690 mm
Bq2zkybpc2
Height horizontal min. 1095 mm
Height horizontal max. 1915 mm
1A condition
there are several turntables of the same type available:
Prices depend on age and condition, please ask.
- 2 x TC 2
- 3 x TC 3
- 4 x TC 4
solid and stable construction, with large work table, strokes/min over nominal length/over 50mm = 50/80
Machine will be repaired, checked, cleaned by a specialist and will be fully functional. Test run will be carried out.
blade length: 220 mm
sheet thickness: 4 mm
colour: green
Total power requirement: 16 A
Machine weight: 900 kg
Space requirement: 1000 x 860 x 1200 mm
Angle adjustable from-to: 30 - 140 mm
Connection value: 400 V
Buyxra39ws
double spiral
wire diameter 1,5-3,8 mm
mesh width 20-80 mm
Pufuhi
working width 3000 mm
capacity - m²/hour 150 m²
tolling for mesh 50 mm
adjustable gear motor, variable speed gear motor, electric motor
Mmxif
-Motor power: 0.18 kW
-Speed range: 81-485 rpm
-Motor: adjustable
-Drive shaft: Ø 14 mm
-Construction: B3
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 365/200/H190 mm
-Weight: 19 kg
suitable for make Altendorf
Btzdl2rysk
second hand,
Make Altendorf
Type duplex
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
work surface 2,000 x 800 mm
manual height adjustment 720 up to 1,020 mm by grid lock
rear panel with shelves
I32gye3z
height rear panel 450 mm
lateral base unit with drawers
drawer width 335 mm
lateral socket strip
Welding rotary table height adjustable 4,5 tons load capacity
Complete set with hand remote control
Welding current transmission 600 Ampere
B98b8hg
Height tilted min. 870 mm
Height tilted max. 1690 mm
Height horizontal min. 1095 mm
Height horizontal max. 1915 mm
1A condition
attention clamping plate surcharge 1500.-€
there are several turntables of the same type available:
Prices depend on age and condition, please ask.
- 2 x TC 2
- 3 x TC 3
- 2 x TC 4
2 T - grooves in the table 30° - 140°
2 side stops with scale and groove for attachable back stop
Cutting depth adjustable
Knife for stainless steel built in
Foot switch
Selector switch for single step or step by step operation
2 mechanical hold-downs
Cutting gap adjustment automatic
Knife length (mm) 220
Bu2a0froqp
Cutting capacity R = 42Kg/mm2 6,5
Cutting capacity: R = 60Kg/mm2 5
Strokes/minute: at max. length 50
Strokes/minute: at 50 mm cut 80
Working height (mm) 900
Oil tank capacity 35
Engi...
double spiral
wire diameter 1,6-3,8 mm
Nszu7
mesh width 50x50 mm
working width 3000 mm
capacity 170 m²
tooling for mesh width 50x50 + 40x40
adjustable gear motor, variable speed gear motor, electric motor
2hun3ondp
-Manufacturer variable speed gear Lenze type: 11.715.03.04
-Manufacturer gearbox Lenze type: 52.145.04.100
-Manufacturer Motor Hanning Type: EeDF71L/2
-Motor power: 0.55 kW
-Speed range: 46-264 rpm
-Motor: adjustable
-Drive shaft: Ø 25 mm
-Construction: B5 angle
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 480/220/H220 mm
-Weight: 25 kg
No. 413
second hand
2-part, adjustable
Dimensions approx. 160 mm x 36.4 - 60 mm x 30mm / 35mm / 40 mm with bushings
Indexable inserts
Groove width adjustable approx. 36.4-60 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul
without guarantee and warranty
Bu88e9bq7b
Adjustable portal crane, 1-ton exclusive chain hoist and trolley Max lifting capacity 1 Ton Height Min: +/- 240 Cm Height Max: +/- 360 Cm Width outside: +/- 250 Cm Weight: +/- 117 Kg Packing size 229 x 52 x 21 Cm 567.49 including VAT (almost always in stock) chain hoist and trolley also deliverable (normally also in stock) Monday to Friday available from 9:00 to 23:00 Saturday from 9:00 to 18:00 outside these times only by e-mail Handelsonderneming Dekkers Wijk en Aalburg (nb) tel. bgg.
Otl2h
Welding rotary table height adjustable 4,5 tons load capacity
2 pieces available
Complete set with hand and foot remote control
Welding current transmission 600 Ampere
Height tilted min. 870 mm
Height tilted max. 1690 mm
Height horizontal min. 1095 mm
Height horizontal max. 1915 mm
1A condition
there are several turntables of the same type available:
Prices depend on age and condition, please ask.
- 2 x TC 2
- 3 x TC 3
2ssg9a
- 2 x TC 4
Working platform, height adjustable, mobile
Robust LM construction, Al-grooved surface
Platform width: approx. 1,200 mm Platform length: approx. 3,500 mm
Load capacity: 250 kg
Height adjustment of the platform from approx. 2.010mm to approx. 3.335 mm
Height adjustment by means of winches, in increments of approx. 265 mm
Chassis with swivel castors and brakes, width of chassis approx. 1,650 mm
Access at one end via stairs with variable inclination.
Step width 800 mm with 2-sided handrail and safe...
♻️ Versatile - our wren with 3-fold mowing star ♻️
The mowing star protrudes laterally beyond the edge of the tractor and can be guided under the fence due to its flat construction height. The tractor drives up and the mower star, with a working width of approx. 0.95 m, mows the vegetation under the fence free. Due to the central mounting of the mower star, to which the three mowing elements are attached, the mower star can rotate around the central axis in the event of an obstacle (e.g. a pole)...
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer Motor Motovario Type: TKRR/5
2huk7cu2f
-Motor power: 0.37 kW
-Speed range: 20-100 rpm
-Motor: adjustable
-Drive shaft: Ø 28 mm
-Construction: B3
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 620/230/H240 mm
-Weight: 31 kg
we offer:
Conveyor belt The belt 300x50x115cm adjustable in height and angle,mobile on 2 stands with 2 rollers each, support in the middle, belt is functional.
Type: 300x50x115cm
No. 9508-0379/02
dimensions belt: 300x50cm
dimensions plant: 300x70cm
height: 115cm
Angle: adjustable
belt speed: 4-5m/min
mobile: yes on 4 rollers
connection: 380/220V 50 Hz
gear motor: RF 0,25/4-7 0,25 kW 1410 U IP 44
control cabinet with contactor and motor protection
weight approx. 200 kg
Condition. used, ready for ...
315x7,7 PVC PIPE CALIBRATION ADJUSTABLE
Bonab3vww2
PIPE DIAMETER: 315x7,7 mm
Condition: very good
Protec KT 3000 HV, Hydraulically height adjustable
Load 3000 KG
Manual remote control with digital display
Double foot remote control
Height approx. min. 700mm horizontal, height max. 1400mm
Diameter face plate 1400mm
Vvlhq0w
Angle of inclination min. 135
Speed 0,05 to 0,6 U/min.
Motor power 3 KW
Manipulator with hydraulic height adjustment, and manual remote control for large components.
Load capacity: 3.000kg
Faceplate diameter: D1.200mm with 12pcs T-slots T18/M16
Max. component diameter: 4.000mm
Face plate height: 680mm
Stroke face plate: 1.400mm
Swivel range support arm: +/- 300
3muzy9e7
Torque face plate: 5.700Nm
Torque main axis: 13.420Nm
Welding current: 600A
consisting of:
ᐳ Stop rail 3 m long
ᐳ 2 pieces complete stops
ᐳ 1 piece measuring scale right ᐳ left
ᐳ 1 piece measuring scale left ᐳ right
Ffjze8wfs
ᐳ Mounting screws
- The delivery does not include the wooden base strip 50 x 45 mm, onto which the stop rail is screwed.
adjustable gear motor, variable speed gear motor, electric motor
Psypqa
-Motor power: 0.37 kW
-Speed range: 358-1850 rpm
-Motor: adjustable
-Shaft: Ø 11 mm
-Construction: B5
-with electrical separating coupling KEB type Combibox
-Number: 2 motors available
-Price: per piece
-Dimensions: 455/180/H175 mm
-Weight: 14 kg
Bösch A97 mitre fence used
Price plus value added tax
Cklsvvia
Its 2018 manufactured and the reason of selling the machine the machine is the company os closing operations. It is in fully functional condition. It can produce fence size of height of 10 ft and roll length of up to 100 mtr.
Only 1 machine left in stock at a good price.
Bs9yo9h0zm
Please contacts us for further details and let us know. Machine running video available on request.
600 Kg load capacity welding rotary table adjustable in height with through hole 100 - 200mm
Cvfitaxi
plate diameter 700mm
height horizontal min. 0,65m, max. 1,15m
height tilted min. 0,45m, max. 0,95m
Speed from 0,01 - 1,0 rpm digital display
Tilt up to 135
hand and foot remote control with speed display
very robust
This turntable is also in stock with 1000 Kg and 3000 Kg capacity
We sell an Auklinker with adjustable angle in serviceable condition.
Fvzghxnzi
Table dimension: 1000x800 mm
blade length: 200 mm
Cutting capacity: 6mm in steel /4mm in stainless steel
cutting head stepless: 30-135 degrees
motor: 4 kW
strokes/min: 60
weight: 1100 kg
New upper knives for 30° cuts
Documentation available
consisting of:
ᐳ Stop rail 2 m long
S0wwzbil
ᐳ 2 pieces complete stops
ᐳ 1 piece measuring scale right ᐳ left
ᐳ 1 piece measuring scale left ᐳ right
ᐳ Mounting screws
- The delivery does not include the wooden base strip 50 x 45 mm, onto which the stop rail is screwed.
adjustable gear motor, variable speed gear motor, electric motor
-Manufacturer Motor Motovario Type: TKRR/5
-Motor power: 0.37 kW
-Speed range: 20-100 rpm
-Motor: adjustable
-Drive shaft: Ø 24 mm
-Number: 1 piece of motors available
2ghdndxpm
-Price: per piece
-Dimensions: 550/180/H230 mm
-Weight: 24 kg
Head machining of posts, boards, laths for tear-free processing.
Ym2ao
with magazine which works itself off independently
2 milling spindles move independently from the outside to the centre to prevent any tearing.
HOKUBEMA double-sided miter fence
Type DGA analog
... Suitable for almost all Saws
with a correspondingly high
Sliding table!
... Corresponding adapter plates are
available as an option!
- For angle cuts 0-90 ° on the
Sliding table / sliding table.
- Length and angular adjustable
about scale.
- For cutting to 1370 mm with
Length compensation for preferential angle
5 °, 10 °, 15 °, 22.5 °, 30 °, 45 °, 60 °, 67.5 °.
2ttawi82
- Incl. Splintertree
- Incl. Practical wall mount
Welding turntable hydraulically height adjustable, 10 tons load capacity
Condition As good as new, little used
Rotation speed 0 - 0.6 rpm
Tilt angle 0 - 135 °
height adjustment min. 1100mm - max. 2300mm
table diameter 2000mm
Motor drive 3 KW
Welding ground connection 1000 Ampere
Self-locking gear, no pre- and post-running under eccentric load
Speed control with frequency converter
heavy compact construction, high stability
CE Certified
external hydraulic power pack and control cabinet,
can be in...
Assembly table with adjustable support bars COMALL JOB 15/2000, new
Technical specifications:
- Contact surfaces in semi-rigid gray PVC
- Loading: 180 Kg
Crubibt3
- Four length wise sliding supporting bars, clamping system through handle
- Pneumatic system with two pneumatic connections
- Hardware boxes, 6 pcs.
- Extensible support, equipped with two longitudinal sliding bars
Integral stop
Make: Aigner
500/500
B833jogc
- both stop halves 500 mm long each
We deliver:
Aigner safety technology for professional woodworking.
adjustable gear motor, variable speed gear motor, electric motor
-Motor power: 0.37 kW
-Speed range without angular gear: 358-1850 rpm
-Speed range with angular gear: 24-115 rpm
2gccfxt0p
-Motor: adjustable
-Diameter hollow shaft: Ø 19 mm
-Construction: B3 angle
-Number: 1 piece of motors available
-Price: per piece
-Dimensions: 440/182/H220 mm
-Weight: 13 kg
Maker: Jaespa
Model: DHG 800 Classic
Year:2012
+-45 degree can be turn the band/head
Originally turbine vain cut with it
Table size:2700mmx2700mm
Ksd0rqcr
Weight:9200kg
Max cut length: 780mm
Band length: 6500mm
Wire range- 1,5- 2,8 mm
Mesh with - 20 - 70 mm
Working with - max.2000mm
Capacity - 170 m2 / hour
With compaktor- Wafios AFK 1, and standard unit
Ghcswgtue
height adjustable welding turntable load capacity 2 tons
condition very good
speed, height, inclination stepless adjustable
hand and foot remote control
Welding current transmission 600 Ampere
Dxbrpm
dimensions:
Length: 1940mm
width 1200mm
Diameter disc 1200mm
Height tilted: min, 700mm, max 1550mm
Height horizontal: min. 900mm, max 1700mm
Tilting angle max. 135
weight 1750 Kg
all technical documents and instructions for use available
Adjustable 2 - locker Balasubramanian cutterhead Fabr. VICTORY hole and SCHNIEDER type V1302
22594 Fabr.# year 1994
Technical data:
Drilling capacity ST 50 13 mm
KL. 34 mm
Bzt3fab
Speed 1:1
Erl Spindle Center distance 130 mm
with
-Clamping tongs recording
-Mounting flange
used, in very good condition