Used Felder G 660 for sale (129)

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm Kfedpoxllw Njfx Affsa - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Bandsaw Hammer 4400, in very good condition, 1.5 kW, approx. 110 kg Kodpfxsx H Ud Re Affsfa Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: good (used), Year of construction: 2013, functionality: fully functional, overall weight: 750 kg, volume flow: 6,000 m³/h, input voltage: 400 V, Clean air extraction unit Felder RL-300 Year of manufacture: 2013 The unit comes from a training facility and has seen very little use in recent years. Maintenance by Felder / maintenance of the extinguishing system has been carried out regularly. Receipts, manuals, and ATEX protection documents available. Technical data: - Extraction capacity: approx. 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip collection volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic extinguishing system (powder extinguisher) - Steel impeller wheel - Motor power: 8.2 kW Weight: 750 kg Kfsdjx H Tyqepfx Affsa Matching ducting for ceiling installation (NW160-300) with transition pieces and pneumatic shut-off slides available on request.

Condition: excellent (used), Year of construction: 2024, operating hours: 279 h, functionality: fully functional, cutting length (max.): 3,200 mm, Well-maintained Format 4 Kappa 550 panel saw, acquired in 2024 as a refurbished demonstration unit. The machine’s actual year of manufacture is 2017. Equipped with a high-quality feature set. The main saw unit has only 279 operating hours (the scoring unit 22 h). Power: 10 kW Sliding table with X-Roll technology: 3,200 mm Electronically controlled height and tilt adjustment 0°–46° Saw blade diameter 250–550 mm, max. cutting height 202 mm Overhead guard, hood for 90° and hood for angled cuts E-motion control 15” color touchscreen display Electronically positioned rip fence with digital readout, cutting width 1250 mm Tools and replacement saw blades (main and scorer) included. Kfjdex H Tydopfx Affsa #8455

Condition: used, Year of construction: 2022, Direction of plate feed: from operator to the left Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 45 mm Minimum workpiece length: 140 mm Feed speed: 9 m/min Kfjdox H Tmkopfx Affea Jointing unit: Yes, with 2 milling units Jointing tool: DIA indexable insert cutter Diameter: 80 mm Height: 49 mm Infeed fence adjustment: manual Cross-cut shear up to: 3 mm Single-edge feeding: possible Gluing: glue contact roller Glue pot design: replaceable + additional glue pot PU gluing: possible Cross-cut saw: yes Combination unit for flush/chamfer/radius trim: pneumatically adjustable Profile scraper: pneumatically adjustable Flat scraper: yes Buffing unit: yes Spraying device: release agent/cleaning agent Unit display: on the display Control type: PLC line control Operation: touch screen Motor power: 14.5 kW Transport device: no Extendable roller support: yes Protective hood: yes Storage location: customer

Condition: used, functionality: fully functional, filter area: 50 m², nominal flow rate: 5,090 m³/h, noise level: 75 dB, extraction nozzle diameter: 300 mm, Technical data Max. airflow 6000 m3/h Nominal airflow 20 m/s 5090 m3/h Nominal pressure 20 m/s At extraction speed 2680 Pa Extraction connection Ø 300 mm Cartridge filter - Filter surface 50 m2 Kfedex H Stiopfx Affoa Noise level 75 dB Chip container 2x250 l - With cartridge filter - With chip remover - With JET cleaning

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm Kodpfjx Enr Esx Affefa - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach

Condition: like new (used), pre-milling unit, crosscut saws, milling cutters, rounding unit, radius scrapers, flat scrapers, polishers, year of manufacture 2012 Ksdpex H Nw Eefx Affsfa

Year of construction: 2008, condition: ready for operation (used), General Data Measurements height 250 mm Measurements depth 1700 mm Dimensions Machine Length 3530 mm Main Drive Spindle Speed 24000 RPM This 3-axis CNC processing center manufactured in 2008 features a robust Felder Format4 Profit 2.s with a working area of X=3530 mm, Y=1700 mm, and Z=250 mm. It achieves speeds up to 60 m/min in X and Y, and 15 m/min in Z. Includes a mobile dust extractor Felder RL200, enhancing operational cleanliness and efficiency. Consider the opportunity to buy this Felder Format4 Profit 2.s CNC processing center. Contact us for more information about this machine. Ksdpfx Afex D Hqnefsfa Application Types CNC Wood Machining

Condition: used, Year of construction: 2010, Machine operates perfectly, the front cleaning unit requires cleaning. Fully functional Year of manufacture: 2010 Radius scraper blade Kfjdpfxox Hqdms Affea Flat scraper blade Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic insertion lock Polishing Machine no.: 200.07.011.10

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Kedpfx Aoxg Igioffefa

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 1,150 mm, total length: 2,275 mm, total height: 2,285 mm, noise level: 75 dB, extraction nozzle diameter: 300 mm, space requirement length: 2,640 mm, space requirement height: 2,985 mm, The Felder RL300 industrial extractor has been put up for sale due to the failure of the tender. Brand new, unopened packaging for 75% of the new price. Guaranteed, with commissioning Description: Air flow, max: 6000 m3/h Nominal air flow: 20m/sec, 5090 m3/h Vacuum: 450 Pa Filter surface: 50 m2 Extraction nozzle diameter: 300 mm Modern, bright, clean design Great and efficient performance Kedpfex H Srrjx Affjfa Chipboard storage Cartridge filter JET cleaning Year of manufacture: 2022

Condition: excellent (used), Shelf Press Felder Format 4 HVP PL90 Shelf length: 300cm Width: 130cm Very nice aluminium shelves Water heating, the machine has its own circuit option for connection to an external circuit Piston diameter 70mm, 6 pistons Safety switch – emergency cut-off pull cord Pressure 3kg/cm2 Kedex Ebtmepfx Affofa Weight 3200kg The machine is in stock, can be inspected and tested, the condition is very close to a new machine

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, overall weight: 400 kg, input voltage: 400 V, power: 5.52 kW (7.51 HP), The powerful sliding table saw with tilting spindle moulder Standard Equipment: - 3x 400 V motor voltage - 50 Hz motor frequency - 7.5 HP (5.5 kW) with star-delta starter - Direction of rotation switch - Circular saw with saw blade tilting 90°–45°, max. cutting height 104 mm with 315 mm blade diameter, speed 4800 rpm - Cutting width 800 mm, min. transport width 800 mm - Parallel fence with digital readout - Extraction duct for 800 mm cutting width - Spindle moulder tilting 90°–45°, speeds: 3500/6500/8000/10,000 rpm - Spindle table opening (mm): 230 - Manual spindle tilting 90°–45° - Spindle fence 230 for max. tool diameter 230 mm, fence rails 400 mm - EURO spindle guard - MULTI-adjustment system for spindle fence “230” - Fence rails anodised aluminium - Sliding table, cutting length 1550 mm - Sliding table anodised - Outrigger table 1100 for sliding table 1300–2000 mm - Cross-cut fence 1100 mm, extendable to 2000 mm - Working height (mm): 890 - Min. transport width (mm): 800 Kfedpfox D Tk Iex Affoa - Extraction connection diameter (mm) saw/saw guard: 50 - Extraction connection diameter (mm) fence/under-table moulder: 120/80 - Weight (with standard equipment): 400 kg Special equipment included in the price: 008 7.5 HP (5.5 kW) 010 Star-delta starter 201 Electric height and angle adjustment for saw blade with LED display 119 Electric height and angle adjustment for spindle moulder with LED display 076 Cutting width 800 mm with full table length, min. transport width 800 mm 103 Spindle moulder shaft D=30 mm, 115 mm working height above table

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Application Types Kjdpfex D Ex Rjx Affsfa Other Woodworking Machinery

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! Kedpexzppbsfx Affefa For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Kodpfx Asxta Dyoffefa Location: Supplier

Year of construction: 2020, condition: ready for operation (used), Technical Specification Kfodpfjx D D Scox Affja Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Sawing (Wood)

Condition: like new (used), Year of construction: 2022, DEMONSTRATION MACHINE!!! For sale is a used Felder thickness planer D9-51 with a thickness capacity of up to 254 mm. The machine is in like-new condition and has been refurbished and inspected by our professional technicians. (fully functional) Technical data: - Planing width: 504 mm - 4-knife cutter block (replaceable knives system) - Electric thickness table adjustment with LED display - Planing thickness: 4–254 mm - Variable feed rate: 4–16 m/min - Max. chip removal: 8 mm - 7.5 HP (5.5 kW) motor, 400 Volt - Year of manufacture: 2022 The planer is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Kedpjxzph Dsfx Affsfa Related terms: planer, thicknesser, thicknessing machine, Felder Reference: R-D1618

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Kfodpoxta Dmjfx Affea

Year of construction: 2021, condition: ready for operation (used), Main Drive Number of axis 4 Movement X-Axis Movement 4000 mm Z-Axis Movement 500 mm Kfsdpfex D D Hmjx Affja Y-Axis Movement 1670 mm This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Kfsdpfxjx D Rklj Affja Diamond cutter and glue roller newly installed. This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. Kfedpfxox D D R So Affoa Application Types Edge Banding

Year of construction: 2021, condition: ready for operation (used), This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Kfedpfxox D Exqs Affea Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. Kedpfx Afsx D Eyhjfofa Application Types Sanding